Floating-patch MEMS antennas on HRS substrate for millimetre-wave applications

Novel floating-patch micro-electro-mechanical system (MEMS) antennas are proposed for millimetre-wave applications. The floating-patch MEMS antennas are fabricated on a high resistivity silicon (HRS) substrate using surface micromachining technology. Simulation and experimental results for reflection coefficients and radiation patterns are presented.     

Hydrogen indium vacancy complex VInH4 in n-type InP studied by positron-lifetime

Positron-lifetime experiments have been carried out on two undoped n-type liquid encapsulated Czochralski (LEC)-grown InP samples with different stoichiometric compositions in the temperature range 10-300 K. For temperatures below 120 K for P-rich InP and 100 K for In-rich InP, the positron average lifetime began to increase rapidly and then leveled off, which was associated with the charge state change of hydrogen indium vacancy complexes from (V_InH₄)⁺ to (V_InH₄)⁰. This phenomenon was more obvious in P-rich samples that have a higher concentration of V_InH₄. The transformation temperature of approximately 120 K suggests that the complex V_InH₄ is a donor defect and that the ionization energy is about 0.01 eV. The ionization of neutral V_InH₄ accounted for the decrease of the positron average lifetime when the sample was illuminated with a photon energy of 1.32 eV at 70 K. These results provide evidence for hydrogen complex defects in undoped LEC InP.     

Evaluation of closed-vessel microwave digestion method for the determination of trace impurities in polymer-based photoresist by inductively coupled plasma mass spectrometry

A closed microwave digestion method followed by inductively coupled plasma spectrometric (ICP-MS) analysis was evaluated for the determination of trace impurities in photoresist. To optimize the digestion procedure, several digestion parameters such as acid, heating temperature and heating time were evaluated. Besides, the digestion efficiency of used photoresist material and the recovery of analyte elements obtained by the use of gravimetric method and ICP-MS measurement, individually, were also compared to clarify the completeness of digestion. According to our experiments, the gravimetric method was found to be not so relevant to the completeness of digestion, because the remaining sample matrix could cause suppression effect in the subsequent ICP-MS measurement. In view of minimizing blank value and working time, a simple single-step heating program was proposed to mineralize 0.25 ml of photoresist material with 5 ml of nitric acid at 180 °C for 10 min. Based on the comparative study of the analytical results obtained by instrumental neutron activation analysis (INAA) and proposed method, the reliability of proposed method for the determination of trace metallic impurities in photoresist material has been confirmed.     

InAs/GaAs (1 1 1)A heteroepitaxial systems

We studied the structural, electrical, and mechanical properties of an InAs thin film grown on GaAs (1 1 1)A substrates by molecular beam epitaxy. In contrast to conventionally used (0 0 1) surfaces, where Stranski–Krastanov growth dominates the highly mismatched heteroepitaxy, layer-by-layer growth of InAs can be established. One of the largest advantages of this unique heteroepitaxial system is that it provides a two-dimensional electron gas system in the near-surface region without the problem of electron depletion. We review the fundamental properties and applications of this unique heteroepitaxial system.     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.     

Liminf results on the increments of an (N,d)-Gaussian process

We establish some liminf theorems on the increments of a (N,d)-Gaussian process with the usual Euclidean norm, via estimating upper bounds of large deviation probabilities on the suprema of the (N,d)-Gaussian process. This revised version was published online in June 2006 with corrections to the Cover Date.     

Brightness and decay time of Zn2SiO4:Mn phosphor particles with spherical shape and fine size

Green-light-emitting Zn₂SiO₄:Mn phosphor particles were synthesized by modified large-scale spray pyrolysis using a colloidal solution containing fumed silica particles. The particles had a fine size, filled morphology, spherical shape and non-aggregation characteristics even after post-treatment at 1150 °C. The luminescence characteristics of Zn₂SiO₄:Mn phosphor particles having spherical shape, such as brightness and decay time under VUV excitation light, were investigated as a function of Mn content. The luminescence intensity exhibits a maximum at 5 mol% Mn-doped powder. The decay time increases consistently with decreasing Mn content and more saturated color coordinates are obtained with the composition having 12 mol% Mn. As a consequence, the 10 mol% Mn-doped powder proved to provide a good combination of favorable luminance and acceptable decay time. The influence of post-treatment temperature on the decay time and photoluminescence characteristics of Zn₂SiO₄:Mn particles was also investigated. Particles post-treated at 1155 °C had the maximum photoluminescence intensity, which was identical to 113% that of the commercial product, and a comparable decay time of 5.8 ms. PACS 81.20.Rg; 78. 55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Measured equation of invariance with linear tensor relation for three-dimensional scattering problems

The postulate of a linear tensor relation in the measured equation of invariance (MEI) is proposed for three-dimensional (3D) problems. As a result, all three components of the field vector to be solved are coupled in the MEI. Combined with the finite difference method, the present method is applied to the analysis of scattering by 3D conducting objects and results in a significant improvement in the accuracy of numerical results as compared to those obtained with an uncoupled linear relation.     

Comparative investigation of up-conversion luminescence in Tm/Yb-codoped germanate-niobic and germanium-bismuth glasses: effect of phonon density on up-conversion emission

Tm³⁺/Yb³⁺-codoped germanate-niobic (GN) and germanium-bismuth (GB) glasses have been synthesized by conventional melting and quenching method. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions ¹G₄→³H₆ and ¹G₄→³H₄, respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. GN glass showed a weaker up-conversion emission than GB glass, which is inconsistent with the prediction from the difference of maximum phonon energy between GN and GB glasses. In this paper, Raman spectroscopy was employed to investigate the origin of the difference in up-conversion luminescence in the two glasses. Compared with phonon side-band spectroscopy, Raman spectroscopy extracts more information including both phonon energy and phonon density. For the first time, our results reveal that, besides the maximum phonon energy, the phonon density of host glasses is also an important factor in determining the up-conversion efficiency.     

Theory of Switched RF Resonators

Transient characteristics of switched resonators have been studied. The resonators exhibit controllable impedance and energy storage behaviors during an alternating charging and discharging process. It is discovered that these unique characteristics of switched resonators can lead to novel RF envelope signal processing functions. The paper discusses the basic theory of switched resonators and the designing methodology of relevant RF signal processing applications. Two applications are presented as examples. The first example is a variable, reflective attenuator which uses the controllable impedance of the switched resonators to achieve different attenuation/reflection levels. In the second example, a simple, compact and efficient RF pulse compression technique based on the switched resonator concept is introduced. It utilizes the charging/discharging characteristics of the circuit resonator by varying the resonator's Q-factor. The approach compresses the duration of the modulated pulse without changing the phase characteristics of the RF carrier. The pulse compression technique can also be implemented with other type of resonators including distributed resonators, as demonstrated through the experiments