基于强度传输方程的相位检索

为了从直接测量的强度图像中计算出相位信息,研究了基于强度传输方程的相位检索技术.设计了一个实用的相位检索系统,包含经典傅里叶相位检索和基于整体变分的相位检索算法.通过测量聚焦平面和前后散焦平面光波场的空间强度,求解二阶微分方程得到相位.与迭代相位检索技术相比克服了其迭代不确定性、收敛速度慢等缺点.实验表明,利用强度传输...     

A new self-adaptive alternating direction method for variational inequality problems with linear equality and inequality constraints

In this paper, we present a new self-adaptive alternating direction method for solving a class of variational inequality problems with both linear equality and inequality constraints without the need to add any extra slack variables. The method is simple because it needs only to perform some projections and function evaluations. In addition, to further enhance its efficiency, we adopt a self-adaptive strategy to adjust parameter μ at each iteration. Convergence of the proposed method is proved under certain conditions. Numerical experience illustrates the efficiency of the new method.     

Heterogeneous nucleation and growth of CdSe on magnetite seed nanocrystals: The influence of ligand and morphology

The heterogeneous nucleation and growth of CdSe domains on the Fe₃O₄ seed nanocrystals are hard to be controlled because of significant lattice mismatch between Fe₃O₄ and CdSe nanocrystals. Current study exploits the choice of surface ligand and crystal morphology for Fe₃O₄ seed to investigate ways to overcome the energy barrier imposed by the lattice mismatch for the promotion and control of subsequent growth of CdSe nanocrystals on seeded crystals. Results indicate that the growth of CdSe domains on seed nanocrystals not only depends on the affinity of ligands toward seed nanocrystals, but also is affected by the seed ligands in a similar way to synthesizing individual second-domain nanocrystals. Furthermore, preferential growth of CdSe domains on the corner of cubic seeds are observed, and cubic Fe₃O₄ nanocrystals are favored for the heterogeneous nucleation of CdSe as opposed to spherical ones. A three-stage growth model (heterostructures formation, the adsorption of Se and the heterogeneous nucleation and growth) is proposed, where choice of ligands, geometry features, such as surface curvature and defects are found to have significant impact to overcome energy barrier from lattice mismatch.     

Fabrication and characterization of CdS-sensitized TiO<Subscript>2</Subscript> nanotube photoelectrode

CdS quantum dot (Qd)-sensitized TiO₂ nanotube array photoelectrode is synthesised via a two-step method on tin-doped In₂O₃-coated (ITO) glass substrate. TiO₂ nanotube arrays are prepared in the ethylene glycol electrolyte solution by anodizing titanium films which are deposited on ITO glass substrate by radio frequency sputtering. Then, the CdS Qds are deposited on the nanotubes by successive ionic layer adsorption and reaction technique. The resulting nanotube arrays are characterized by scanning electron microscopy, X-ray diffraction (XRD) and UV–visible absorption spectroscopy. The length of the obtained nanotubes reaches 1.60 μm and their inner diameter and wall thickness are around 90 and 20 nm, respectively. The XRD results show that the as-prepared TiO₂ nanotubes array is amorphous, which are converted to anatase TiO₂ after annealed at 450 °C for 2 h. The CdS Qds deposited on the TiO₂ nanotubes shift the absorption edge of TiO₂ from 388 to 494 nm. The results show that the CdS-sensitized TiO₂ nanotubes array film can be used as the photoelectrode for solar cells.     

Influencing factors of microscanning performance based on flat optical component

To decrease the performance difference between the actual microscanning thermal imager and the theoretical value, a germanium lens (placed at a certain angle between the infrared focal plane array and infrared lens) dip angle model of flat optical component microscanning is introduced in this letter. The model is the basis for choosing the dip angle of the germanium lens, which is used in the microscanning thermal imager. In addition, the actual dip angle of the germanium lens is chosen according to the model, the infrared lens parameters of the thermal imager, and the germanium lens parameters of manufacture and installation. Only in this manner can the optimal performance of the microscanning thermal imager based on the flat optical component be obtained. Results of the experiments confirm the accuracy of the conclusions above.     

基于叶绿素荧光光谱分析的黄瓜霜霉病害预测模型

为了实现对黄瓜病害的快速无损准确预测,基于激光诱导叶绿素荧光光谱分析技术,建立了温室黄瓜霜霉病害的预测模型.通过测定健康叶片、病菌接种3d叶片和接种6d叶片的光谱曲线,采用一阶导数光谱预处理方法,结合主成分分析数据降维方法对三组光谱数据进行特征信息提取后,建立主成分得分散点图,依据累积贡献率选取10个主成分代替导数光谱...     

硫化砷非晶态波导光阻断效应的机理研究

在实验研究了As₂S₈和掺杂As₂S₈薄膜波导光阻断效应的基础上,讨论了反常电子组态的形成机理和转移机理,提出了光阻断效应切断过程和回复过程的动力学模型,数值分析结果与实验数据十分符合,理论预期与实验现象一致,表明该模型抓住了光阻断效应的基本特征,揭示了过程本质,反映了实验现象的内在机理. 关键词： 光波导技术 硫属化合物玻璃 光阻断效应 动力学模型     

质子交换LiNbO3波导调制器多模截止波长的测试技术研究

提出并实验了一种采用倒置输入的结构来测定Y分支LiNbO3波导相位调制器的多模截止波长的新方法,模式耦合分析表明,倒置输入的Y分支波导的多模传输的输出功率具有随波长变动发生振荡的特征,该特征可用于定量判定多模截止波长.方法的有效性得到了波束传播法(BPM)仿真和样品实验两方面的验证.     

RETRACTED ARTICLE: Microenvironment characterization for a novel biocompatible hybrid carbon-silicon material

The compatible carbon-silicon complex materials originated from precursor diglycerylsilane (DGS) and sugar-modified silane N-(3-triethoxysilylpropyl)gluconamide (GLS) have gained substantial popularity by demonstrating admirable properties to stabilize entrapped biomolecules. The microenvironment inside these materials, especially the distribution of sugar moieties inside the matrix, which is likely the most critical factor determining compatibility of these materials, still remains unclear. To deeply investigate the biocompatibility mechanism of these materials, we have adopted two different preparation routes for these materials by introducing GLS into the starting DGS sol stage, but things are different after the DGS gel is formed. A fluorescence probe rhodamine 6G is introduced herein in the DGS sol to monitor the distribution of GLS moieties, as well as the evolution of the microenvironment inside resulting materials. All in all, the findings demonstrated that the timing of GLS addition plays a critical role in controlling the evolution of the inner structure of materials, suggesting that this factor provides a promising route to tune the properties of the resulting materials. Supported by the National Natural Science Foundation of China (Grant No. 20876176), Scientific Research Foundation for the Returned Overseas Chinese Scholars by the State Education Ministry, Key Project of Chinese Ministry of Education (Grant No. 109100), Doctoral Project of Shandong Province (Grant No. 2008BS09013), Research Foundation of Key Laboratory of Carbon Materials, Institute of Coal Chemistry, CAS (Grant No. KFJJ0506), and Natural Science Foundation of Shandong Province (Grant No. Q2007B02)     

Simultaneous determination of phthalates and adipates in human serum using gas chromatography–mass spectrometry with solid‐phase extraction

A gas chromatography–mass spectrometry assay was developed and validated for the simultaneous determination of phthalates and adipates in human serum. The phthalates and adipates studied were dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzylbutyl phthalate, di‐2‐ethylhexyl phthalate, di‐n‐octyl phthalate, diethyl adipate, dibutyl adipate, diisobutyl adipate, bis(2‐butoxyethyl) adipate and di‐2‐ethylhexyl adipate, with diisooctyl phthalate as internal standard. The extraction and cleaning up procedure was carried out with solid‐phase extraction cartridges containing dimethyl butylamine groups, which showed extraction efficiencies over 88% for each analyte and the internal standard. The calibration curves obtained were linear with correlation coefficients greater than 0.98. For all analytes, the assay gave CV% values for intra‐day precision from 4.9 to 13.3% and mean accuracy values from 91.4 to 108.4%, while inter‐day precision was 5.2–13.4% and mean accuracy 91.0–110.2%. The limits of detection for the assay of phthalates and adipates were in the range 0.7–4.5 ng/mL. The method is simple, sensitive and accurate, and allows for simultaneous determination of nanogram levels of phthalates and adipates in human serum. It was successfully applied to an investigation on the level of phthalates and adipates in a non‐occupationally exposed population.