Thermally crosslinkable hole‐transporting poly(fluorene‐co‐triphenylamine) for multilayer polymer light‐emitting diodes

This article reports the synthesis and characterization of a novel thermally crosslinkable hole‐transporting poly (fluorene‐co‐triphenylamine) (PFO‐TPA) by Suzuki coupling reaction, followed with its application in the fabrication of multilayer light‐emitting diodes by wet processes. The thermal, photophysical, and electrochemical properties of PFO‐TPA were investigated by differential scanning calorimeter, thermogravimetric analysis, optical spectroscopy, and cyclic voltammetry, respectively. Thermally crosslinked PFO‐TPA, through pendant styryl groups, demonstrates excellent thermal stability (T_d > 400 °C, T_g = 152 °C), solvent resistance, and film homogeneity. Its highest occupied molecular orbital level (?5.30 eV) lies between those of PEDOT:PSS (?5.0 ～ ?5.2 eV) and poly(9,9‐dioctylfluorene) (PFO: ?5.70 eV), forming a stepwise energy ladder to facilitate hole injection. Multilayer device with crosslinked PFO‐TPA as hole‐injection layer (HIL) (ITO/PEDOT:PSS/HIL/PFO/LiF/Ca/Al) was readily fabricated by successive spin‐coating processes, its maximum luminance efficiency (3.16 cd/A) were about six times higher than those without PFO‐TPA layer (0.50 cd/A). The result of hole‐only device also confirmed hole‐injection and hole‐transport abilities of crosslinked PFO‐TPA layer. Consequently, the device performance enhancement is attributed to more balanced charges injection in the presence of crosslinked PFO‐TPA layer. The thermally crosslinkable PFO‐TPA is a promising material for the fabrication of efficient multilayer polymer light‐emitting diodes because it is not only a hole‐transporting polymer but also thermally crosslinkable. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A facile pathway for the fast synthesis of colloidal crystal‐loaded hydrogels via frontal polymerization

In this work, a dually sensitive colloidal crystal (CC)‐loaded hydrogel has been synthesized via frontal polymerization (FP) in a facile and rapid way. First, a polystyrene CC film was fabricated by vertical deposition on the inner wall of a test tube. Then, a mixture of acrylic acid (AAc), 2‐hydroxyethyl methacrylate (HEMA), and glycerol along with the initiator and crosslinker was added to this test tube to carry out FP, resulting in the formation of CC‐loaded hydrogel. The influence of the mass ratios of HEMA/AAc on front velocity and temperatures were studied. The swelling behavior, the morphology, and the stimuli‐responsive behavior of the CC‐loaded hydrogels prepared via FP were thoroughly investigated on the basis of swelling measurement, scanning electron microscopy, and reflection spectra. Results show that the as‐prepared CC‐loaded hydrogels exhibit excellent dual sensitivity to both methanol concentrations and pH values with very short response time, which can be observed visually without the aid of instruments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate esters

We reveal a route for the preparation of phosphinated bisphenol, 1,1‐bis(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (2) , via a one‐pot reaction of 1,1,1‐tris(4‐hydroxyphenyl)ethane and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) in the catalysis of p‐toluenesulfonic acid. A two‐step reaction mechanism, acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane followed by nucleophilic addition of DOPO, is proposed for the synthesis. Based on (2) , a dicyanate ester derivative, 1,1‐bis(4‐cyanatophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (3) was prepared and co‐cured with a commercially available dicyanate ester, the dicyanate ester of bisphenol A (BACY). Experimental data show that incorporating (3) into BACY enhances the flame retardancy and dielectric properties with little penalty to the thermal properties. A thermoset with T_g 274 °C, coefficient of thermal expansion (CTE) 49 ppm/°C, D_k 3.04 (1 GHz), T_d (5%,) N₂: 435 °C, air: 424 °C, and UL‐94 V‐0 rating can be achieved via this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Interaction between salinity intrusion and vegetation succession: A modeling approach

Predicting potential changes in groundwater salinity in low-lying coastal regions due to climate change is important, where coastal vegetation is abundant, succession competition between halophytes and glycophytes plays a significant role in the salinity budget. Sea level rise enhances salinity intrusion, contributing an additional dimension to vegetation competition. A new simulation model known as mangrove-hardwood hammock model coupled with saturated-unsaturated transport (MANTRA) has recently been developed by the authors to simulate groundwater salinity regimes in the presence of vegetation competition, subject to climate change. MANTRA is based upon linking two existing Unites States geological survey (USGS) simulation models known as mangrove-hardwood hammock model (MANHAM) and saturated-unsaturated transport (SUTRA). MANHAM simulates the evolution of vegetation succession subject to changing groundwater salinity. SUTRA simulates saturated and unsaturated transport of solutes and salinity in groundwater given sea salinity. MANTRA improves the simulation robustness to simultaneously simulate groundwater hydrology, salinity and coastal vegetation succession subject to sea level rise. Some simulation results will be presented to demonstrate the impact of sea level rise on coastal vegetation succession and groundwater salinity.     

Thermal analysis of the combustion of charcoals from Eucalyptus dunnii obtained at different pyrolysis temperatures

DSC and TG/DTA were used to study charcoals obtained from eucalyptus wood at different pyrolysis temperatures, as well as the exchanged energy, and the transformations involved during the pyrolysis process. Charcoals DSC curves showed two exothermic peaks, at ~610 and ~750 K. The first peak was squashed for those charcoals obtained at higher final pyrolysis temperatures, and it disappeared in the charcoals obtained at 873 and 923 K. The second peak intensity increased and its location changed at the higher temperatures. Charcoal characterization showed a rise of heat values with the pyrolysis temperature.     

Ytterbium triflate hydrate catalyzed Michael addition and cyclocondensation of α,β-unsaturated ketones with active methylene compounds

Catalyzed by ytterbium（III） triflate hydrate [Yb（OTf）3.xH20], the Michael addition and cyclocondensation of α,β-unsaturated ketones with active methylene compounds to afford the 1,4-adducts and benzo[b]pyran derivatives, respectively were studied.