Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Sonoluminescence quenching of organic compounds in aqueous solution: frequency effects and implications for sonochemistry

Solute-induced quenching of sonoluminescence (SL) is reported for aqueous solutions of two homologous series of methyl esters and ketones using low (20 kHz) and high (515 kHz) ultrasound frequencies. SL data at 20 kHz from aqueous solutions containing alcohols and carboxylic acids are also presented to compare with previously published results at 515 kHz. In addition to supporting the previous findings on the existence of stable and transient bubbles at 515 and 20 kHz, respectively, the results suggest that the hydrogen-bonding characteristics of the solutes also play a major role in the extent of SL quenching. An increase in the SL intensity at low concentrations for most of the solutes suggests that these solutes increase the number of "active" bubbles by hindering the coalescence of bubbles. It is concluded that the effect of the solutes on the SL signal from aqueous solutions at both frequencies is primarily due to the balance of two factors, namely, the incorporation of solute within the bubble, leading to SL quenching, and the prevention of coalescence of the bubbles, leading to SL enhancement. At the higher frequency, SL quenching by the solutes is the main influence on the emission yield. However, at the lower frequency, hindrance to coalescence by the solutes dominates at lower concentrations and leads to SL enhancement. The implications of these results for optimizing conditions for aqueous sonochemical reactions are discussed.     

On the representation of electrostatic fields around ab initio charge distributions

Summary We compare two methods (Mulliken charges and a distributed multipole analysis, DMA) of representing an ab initio charge distribution for calculating the electrostatic field and potential outside the molecule, using pyrimidine and the RNA base uracil as examples. This is done using a 3-D graphical display of the electrostatic fields, which, when used with real-time rotation, zooming and clipping, has many advantages for qualitatively assessing the electrostatic interactions of a molecule. The errors involved in using Mulliken point charges may be of similar magnitude to the total electrostatic field in regions which are important in recognition processes. The DMA representation automatically includes the anisotropic electrostatic effects of non-spherical features in the charge distribution of each atom, and yet the displayed electrostatic fields around the atoms which have lone-pair density do not show marked anisotropy.     

HPLC of 9-fluorenylmethylchloroformate-polyamine derivatives with fluorescence detection

Summary There are a number of reagents available for fluorescent labelling of primary amines. These include dansyl chloride, o-phthalaldehyde, fluorescamine, and a new reagent, 9-fluorenylmethylchloroformate (FMOC), reported recently. This paper describes a reversed-phase HPLC procedure for the separation and fluorescence detection of polyamines following pre-column derivatization with FMOC. The polyamines studied by this method include putrescine, cadaverine, spermidine, and spermine. Experiments were carried out to determine maximum fluorescence excitation and emission wavelengths, optimum reaction pH, linear ranges, and minimum detection limits for each of the polyamines. The HPLC method includes a gradient program which provides complete separation from serum hydrolysate components and specificity for the four polyamines with detection limits ranging from 2 to 9 pg. This procedure was applied to hydrolyzed serum samples.     

Complete ozonolysis of alkyl substituted ethenes at -60 degrees C: distributions of ozonide and oligomeric products

The distribution of ozonide and oligomeric structures formed on complete ozonolysis of alkenes in a non-participating solvent at -60 degrees C is governed by the alkyl substitution around the carbon-carbon double bond. The ozonolysis of a 1,1-alkyl substituted ethene generally favours the formation of an ozonide (a 1,2,4-trioxolane). Whereas the ozonolysis of a 1,1,2-alkyl substituted ethene also produces ozonide, a considerable amount of the ozonised products are oligomeric in nature. For example, the ozonolysis of 3-methylpent-2-ene in solution to high conversion in pentane yields oligomers with structural units derived from the fragmentation products of the primary ozonide (a 1,2,3-trioxolane) which are namely butanone carbonyl oxide and acetaldehyde; these can be characterised by electrospray ionisation mass spectroscopy (ESI-MS) under soft ionisation conditions. The predominant oligomers formed are rich in carbonyl oxide units (80 + mol%) and are cyclic in nature. A small proportion of the oligomers formed are open chain compounds with end groups that suggest that chain termination is brought about either by water or by hydrogen peroxide. Residual water in the solvent will react with the carbonyl oxides to produce 2-methoxybut-2-yl hydroperoxide, which we propose readily decomposes generating hydrogen peroxide. A significant yield of oligomers also is obtained from the ozonolysis of a 1,2-alkyl substituted ethene. The ozonolysis of trans-hex-2-ene in pentane yields oligomers containing up to four structural units and are predicted to be mainly cyclic.     

Sampling unfolding intermediates in calmodulin by single-molecule spectroscopy

We used single-pair fluorescence resonance energy transfer (spFRET) measurements to characterize denatured and partially denatured states of the multidomain calcium signaling protein calmodulin (CaM) in both its apo and Ca(2+)-bound forms. The results demonstrate the existence of an unfolding intermediate. A CaM mutant (CaM-T34C-T110C) was doubly labeled with fluorescent probes AlexaFlour 488 and Texas Red at opposing globular domains. Single-molecule distributions of the distance between fluorophores were obtained by spFRET at varying levels of the denaturant urea. Multiple conformational states of CaM were observed, and the amplitude of each conformation was dependent on urea concentration, with the amplitude of an extended conformation increasing upon denaturation. The distributions at intermediate urea concentrations could not be adequately described as a combination of native and denatured conformations, showing that CaM does not denature via a two-state process and demonstrating that at least one intermediate is present. The intermediate conformations formed upon addition of urea were different for Ca(2+)-CaM and apoCaM. An increase in the amplitude of a compact conformation in CaM was observed for apoCaM but not for Ca(2+)-CAM upon the addition of urea. The changes in the single-molecule distributions of CaM upon denaturation can be described by either a range of intermediate structures or by the presence of a single unfolding intermediate that grows in amplitude upon denaturation. A model for stepwise unfolding of CaM is suggested in which the domains of CaM unfold sequentially.     

Intermolecular coupling of alkenes to heterocycles via C-H bond activation

The intermolecular coupling of unactivated alkenes to a range of heterocycles using a Rh(I) catalyst was investigated. A variety of functional groups were incorporated into the alkene, including esters, nitriles, acetals, and phthalimide. Furthermore, the heterocycle tolerated substitution with both electron-rich and electron-deficient groups. The intermolecular coupling became possible after it was discovered that weak acids dramatically increase the rate of both the inter- and intramolecular reactions. An extensive optimization of additives was performed, and HCl.PCy(3) (Cy = cyclohexyl) and HCl.P-t-Bu(2)Et were in general found to be the best additives for the reaction.     

Energetics of proton transfer between carbon atoms (H3CH ? CH3)−

Ab initio calculations were carried out to study the potential energy surface of (H₃C? H? CH₃)^?. The 6–31G* basis set is supplemented by a set of diffuse p functions on both C and H (with a range of exponents for the latter). The binding energy of CH₄ and CH₃^? to form the (H₃CH? CH₃)^? complex is about 2 kcal/mol, much smaller than for comparable ionic H-bonded systems involving O or N atoms. Nearly half of this interaction energy is due to correlation effects, computed at second and third orders of Møller-Plesset perturbation theory. Correlation is also responsible for substantial reductions in the energy barrier to proton transfer within the complex. This barrier is computed to be 13?15 kcal/mol at the MP3 level, depending upon the exponent used for the H p functions.