Aqueous-Develop,Photosensitive Polynorbornene Dielectric: Optimization of Mechanical and Electrical Properties

The impact of thermal cure conditions on the mechanical and electrical properties of an epoxy cross-linked network incorporating a polynorbornene (PNB) dielectric polymer was studied. The cross-linking of the dielectric composition was achieved by an acid-catalyzed cationic cure reaction initiated by either thermal or photolytic activation of a photoacid generator. It is proposed that the observed mechanical and electrical properties of the fully cured polymer composition are the result of the development of a three-dimensional cross-linked network tying together the PNB polymer and multifunctional epoxy additives. The epoxy ring-opening reaction was measured using Fourier-transform infrared spectroscopy. The reduced modulus, internal film stress, dielectric constant, and swelling behavior of cross-linked films were studied as a function of curing temperature. Trends in the observed properties are explained by formation of a three-dimensional cross-linked network and degradation of the cross-links between the multifunctional epoxy additives at high temperature. It was also found that exposure of the film to aqueous base plays a role in the cure process and has a positive effect on the final properties. The optimum values of modulus, dielectric constant, residual stress, and moisture content were found for films cured at 160°C for 1 h. This relatively low cure temperature is potentially advantageous in device assembly and processing.     

A Java Framework to Specify Faultloads for Fault Injection Campaigns

In an operational environment, the identification and reproduction of faults may be hard to be done, specially in complex systems. Use of fault injection accelerates this process, improving the test of fault tolerance mechanisms. However, there are a significant amount of fault injectors available, using several different approaches. This diversity of tools, each one with different methods to describe faultloads for fault injection campaigns, imposes severe obstacles to the efficient use of such fault injectors. In this context, this paper presents jFaultload, which applies Java for the specification of faultloads and translates them to specific formats that are appropriate to each available fault injector. Fault injectors for communication systems were integrated in the environment and completes the test scenario. The service under test used to demonstrate the usability and expressiveness of our solution is a video streaming session using RTP Protocol.     

The gray level aura matrices for textured image segmentation

Inspired by an intuitive analogy that exists between the gray level textures and the miscibility in the multiphase fluids, the aura concept was developed from set theory tools in order to modeling the texture image. The gray level aura matrix (GLAM) has been then proposed to generalize the gray level cooccurrence matrix (GLCM) which remains very popular in the texture analysis. The GLAM indicates how much each gray level is present in the neighborhood of each other gray level. The neighborhood is defined by a structuring element as one used in mathematical morphology. The GLAM is mainly used and studied in synthesis and classification of textures framework but very few works are devoted to the segmentation. The aim of this paper is to exploit the GLAM for the segmentation of textured images. Experiments results over synthetic and real images show the efficiency of the GLAM. The influence of the shape and the size of the structuring element on the segmentation results are also studied.     

A low-noise front-end for multiplexed ENG recording using CMOS technology

Multi-electrode cuffs have been proposed as a means for the parallel recording of naturally-occurring neural signals. Compared to a conventional tripole cuff providing a single channel signal, additional information about the velocity and direction of nerve signals can be extracted from the multi-electrode recordings. Moreover, interference suppression is improved and overall power consumption reduced, as the analysis shows. In this paper a new recording system is proposed, each channel of which consists of a low-noise preamplifier employing lateral bipolar transistors to provide an impedance match to the tissue and a path to ground for the switching currents of a single high-gain amplifier, which is multiplexed between the channels. The proposed system provides low-noise, low-power operation and practically identical channel gains and is suitable for integration in a larger CMOS-based system.     

A Design of Linearity Built-in Self-Test for Current-Steering DAC

In this paper, a current-mode Built-In Self-Test (BIST) scheme is proposed for on-chip estimating static non-linearity errors in current-steering digital-to-analog converters (DACs). The proposed DAC BIST scheme is designed to verify a 10-bit segmented current-steering DAC, consist of a 5-bit coarse DAC and a 5-bit fine one. This proposed BIST scheme includes a current-mode sample-and-difference circuit to increase the sampling current accuracy and control a current-controlled oscillator (ICO). In addition, only 36 measurements are required by using the selected-code method rather than 1024 measurements for the conventionally-utilized all-code method. Compared to the conventionally-utilized all-code method, about 85-% reduction of test time can be achieved.     

A Behavioral Model of MEMS Convective Accelerometers for the Evaluation of Design and Calibration Strategies at System Level

This paper presents a behavioral model that can be used to improve the manufacturability of systems based on MEMS convective sensors. This model permits to handle faults related to process scattering, taking into account not only the electrical and lateral geometrical parameters but also the influence of the cavity depth. Moreover correlations between conductive and convective phenomena are included. The model is validated with respect to FEM simulations and a very good agreement is obtained between the behavioral model and FEM results. The proposed model can then be used in system-level simulations, for instance to evaluate the impact of process scattering on the performances of the sensing part and/or to investigate different design and calibration strategies with respect to the system robustness.