Study to improve the quality of a Mexican straight run gasoil over NiMo/γ-Al2O3 catalysts

Four NiMo catalyst supported on Al₂O₃ with different textural properties have been studied in the hydrodesulfurization (HDS), hydrodenitrogenation (HDN) and hydrodearomatization (HDA) of a Mexican straight run gasoil (SRGO). All reactions were carried out at three different temperatures 613, 633, and 653 K. Alumina supports were analysed by pyridine FTIR-TPD and nitrogen physisorption in order to determine their surface acidity and textural properties, respectively. TPR studies of the NiMo catalysts were analysed to correlate their hydrogenating properties. Metallic particles were characterized (after sulfidation) using transmission electron microscopy (TEM). Catalytic activities are discussed in relation to the physicochemical properties of NiMo catalysts. The importance of textural properties on coke deposition has been emphasized. The results of catalytic activity of these materials varied depending on dispersed MoS particles and pore distribution in final catalysts. The optimum pore diameter was found around 80 Å for HDS and HDN.     

Ion structure determinations and ion—molecule reactions by double quadrupole mass spectrometry

The QQ mass spectrometer is shown to be applicable to ion structure determination via collision-induced dissociations of mass-selected ions. The instrument can be scanned so as to record the products of dissociation as well as those of ion—molecule association reactions. The dissociations correspond to those observed at high kinetic energy in mass-analyzed ion kinetic energy spectrometers and the association reactions show parallels with reactions seen in ion cyclotron resonance spectroscopy and in high-pressure mass spectrometry     

Phase modulation of the signal beam in three-wave forward mixing in photorefractive bismuth silicon oxide

The interaction of three forward beams in a BSO crystal is investigated under conditions when the two pump beams are anti-symmetrically detuned and the signal beam is phase modulated. For sinusoidal phase modulation the signal gain is shown to be dependent on the instantaneous frequency detuning. Single and double maxima in gain are obtained depending on the voltage amplitude applied to the piezoelectric mirror. For triangular phase modulation a slight asymmetry is found in the gain versus detuning curve.     

A model for a uniform steady-state vacuum arc with a hot anode

A model is formulated and evaluated for a Uniform electrical discharge sustained in vapor evaporated from an arc-heated anode. The plasma potential is positive with respect to both the cathode and anode. For a Cu anode, the anodic vapor dominates the plasma for current densities exceeding 8 kA/m². The anode heating potential is approximately 6.5 V, and the dominant cooling mechanism is evaporation for current densities exceeding 20 kA/m². Over the range 10 to 10000 kA/m², the electron density increases from 8×10¹⁷ to 5×10²³ m^-3, while the ionization fraction rises from 0.3% to 4%. At the lower end of this current range the electrical resistivity of 4 mΩ-m is determined primarily by electron-neutral collisions, while with increasing current the resistivity decreases to 0.7 mΩ-m, with electron-ion collisions contributing an equal share. This hot-anode vacuum arc may have potential for industrial application as a macroparticle-free high-deposition-rate coating source     

Sequential nonlinear estimation with nonaugmented priors

How can the basic compatibility of theory and observations be investigated for nonlinear processes without requiring stochastic characterizations for residual error terms? The present paper proposes a flexible least-cost approach. For each possible estimatex for the sequence of process states, letc _D (x) andx _M(x) denote the costs incurred for deviations away from the prior dynamic specifications and prior measurement specifications, respectively. Define the cost-efficiency frontier to be the greatest lower bound for the set of all possible cost pairs [c _D (x),c _M(x)], conditional on the given observations. State sequence estimatesx that attain the cost-efficiency frontier indicate the possible ways that the actual process could have developed over time in a manner minimally incompatible with the prior dynamic and measurement specifications. An algorithm is developed for the exact sequential updating of the cost-efficient state sequence estimates as the duration of the process increases and additional observations are obtained.     

Surface analytical characterization of oxide-free Si(100) wafer surfaces

Summary Wet-chemical cleaning procedures of Si(100) wafers are surface analytically characterized and compared. Hydrophobic surfaces show considerably less native oxides in comparison to hydrophilic surfaces.The growth of the oxide is determined as a function of exposure to air by means of XPS measurements. The chemically shifted Si2p XPS signal is utilized for the quantification of the growth kinetics.One hour after cleaning no chemically shifted Si2p XPS peak is discernible on the hydrophobic surfaces. Assuming homogeneous oxide growth, the detection limit of native oxides is estimated to be below 0.05 nm using an emission angle of 18° with respect to the wafer surface. The calculation of the oxide thickness from the chemically shifted and nonchemically shifted Si2p XPS peak intensities is carried out according to Finster and Schulze [1]. For more than a day after cleaning no surface oxides can be identified on the hydrophobic surfaces. The oxide growth kinetics is logarithmic. The very slow oxidation rate cannot be attributed to fluorine residues since no fluorine is seen by XPS. We explain the slow oxidation rate by a homogeneous hydrogen saturated Si(100) wafer surface.

---

Oberflächenanalytische Charakterisierung oxidfreier Si(100)-Waferoberflächen