Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.     

Feasibility Study of Batteryless Temperature Transponders Using Miniature Microwave Cavity Resonators

Batteryless temperature transponders have been constructed and tested. The design employs a sensing element consisting of a miniature cavity resonator loaded with a ceramic material of high dielectric constant and large temperature coefficient of resonant frequency. This is connected by thin coaxial cable to a small dipole or sector antenna. Prototypes with sensors 3 mm in diameter have been fabricated and can resolve temperature differences of 0.1°C in air. Signals have been obtained from transponders implanted in anesthetized rats, but antenna orientation is a critical and limiting factor that will require further efforts before a system is capable of operating in freely roaming animals.     

Determination of the rate of rapid lipid transfer induced by poly(ethylene glycol) using the SLM Fourier transform phase and modulation spectrofluorometer

Rate constants were determined for the transfer of the fluorescent lipid probe 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] oxy]carbonyl]-3-sn-phosphatidylcholine (DPHpPC) between large, unilamellar extrusion vesicles composed either of dipalmitoyl phosphatidylcholine (DPPC) or of DPPC mixed with a small amount (0.5 mol%) of lyso phosphatidylcholine (Lyso PC). Transfer of the lipid probe in the presence of varying concentrations of poly(ethylene glycol) (PEG) was monitored using the SLM 48000-MHF Multi-Harmonic Fourier Transform phase and modulation spectrofluorometer to collect multifrequency phase and modulation fluorescence data sets on a subsecond time scale. The unique ability of this instrument to yield accurate fluorescence lifetime data on this time scale allowed transfer to be detected in terms of a time-dependent change in the fluorescent lifetime distribution associated with the lipid-like DPHpPC probe. This probe demonstrates two short fluoresence decay times (ca. 1.1–1.4 and 4.3–4.8 ns) in a probe-rich environment but a single long lifetime (ca. 7 ns) in a probe-poor environment. A simple two-state model for initial lipid transfer was used to analyze the multifrequency data sets collected over a 4-s time frame to obtain the time rate of change of the concentrations of donor and acceptor probe populations following rapid mixing of vesicles with PEG. The ability to measure fluorescence lifetimes on this time scale has allowed us to show that the of rate of lipid transfer increased dramatically at 35% PEG in both fusing and nonfusing vesicle systems. These results are interpreted in terms of a distinct interbilayer structure associated with intimate bilayer contact induced by high and potentially fusogenic concentrations of PEG.     

Staffing Rosters with Breaks — A Case Study

A complex manual rostering system for directory assistance, telephone operators has been rationalized and the technique of integer programming used to automatically generate staff rosters. These rosters can be generated by relatively unskilled clerical staff. They result in operator costs comparable to manually generated rosters and can be produced in a fraction of the time taken to produce their manual counterparts. Implementation is reported.     

A multiparameter wearable physiologic monitoring system for space and terrestrial applications.

A novel, unobtrusive and wearable, multiparameter ambulatory physiologic monitoring system for space and terrestrial applications, termed LifeGuard, is presented. The core element is a wearable monitor, the crew physiologic observation device (CPOD), that provides the capability to continuously record two standard electrocardiogram leads, respiration rate via impedance plethysmography, heart rate, hemoglobin oxygen saturation, ambient or body temperature, three axes of acceleration, and blood pressure. These parameters can be digitally recorded with high fidelity over a 9-h period with precise time stamps and user-defined event markers. Data can be continuously streamed to a base station using a built-in Bluetooth RF link or stored in 32 MB of on-board flash memory and downloaded to a personal computer using a serial port. The device is powered by two AAA batteries. The design, laboratory, and field testing of the wearable monitors are described.     

Practical syntheses of [1,3,5]‐triazine dendritic molecules on solid supports

A practical and divergent synthesis of supported [1,3,5]‐triazine dendritic molecules on Wang resin, PEGA resin, SynPhase? Lanterns, and silica gel is described. The alkylamine linkers used allow derivatization with functionality for both synthetic (e.g., supported reagent and scavenger activity) and chemical biology applications. The use of supported intermediates allows differentiation of symmetric linkers without the need for protecting group chemistry. The synthetic route uses inexpensive, readily available starting materials in a straightforward and scaleable strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2248–2259, 2006