Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Coset extensions of <Emphasis Type=”Italic”>S</Emphasis>-sets

Summary Three weak variants of compactness which lie strictly between compactness and quasicompactness, are introduced. Their basic properties are studied. The interplay with mapping and their direct and inverse preservation under mappings are investigated. In the process three decompositions of compactness are observed.     

Optimal sequences and sum capacity of symbol asynchronous CDMA systems

The optimal signature sequences that maximize the sum capacity of a direct sequence code-division multiple-access (CDMA) system are characterized in the general case of symbol delay profile and user power constraints. It is shown that the optimal sum capacity of the symbol asynchronous system equals that of the symbol synchronous system with the same user power constraints. With the optimal signature sequence set, the maximum sum capacity is achieved with white Gaussian input signals. The existence of the optimal signature sequence set is proved by the proposal of an explicit construction method for arbitrary user delay profiles and power constraints.     

Thermal-lens and photo-acoustic methods for the determination of SiC thermal properties

In this paper we report the use of photothermal techniques such as Thermal lens (TL) spectrometry, Photoacoustic and heat capacity, ρc_p, to determine the thermo-optical parameters, such as thermal conductivity (K), thermal diffusivity (D), specific heat (c_p) and the optical path dependence with temperature (ds/dT), of an undoped polycrystalline 3C-SiC. To our knowledge, this is the first time that Thermal lens technique is used for wide band-gap systems. Results obtained for the polycrystalline sample with TL technique indicates that ds/dT is negative at room temperature. Moreover, the obtained values of thermal diffusivity and thermal conductivity are in good agreement with that found in the literature, indicating that the phototermal techniques can be used to obtain the referred parameters in circumstances where other techniques cannot be used, for example, in harsh environments.     

High performance laser with nanopatterned active layer by selective area epitaxy

Lasers containing a nanopatterned active layer demonstrating excellent threshold characteristics are presented. The nanopatterned active layer is fabricated using high-resolution electron beam lithography and selective-area metal organic chemical vapour deposition crystal growth. Results demonstrating an order of magnitude improvement over previous results are reported.     

Low-voltage wideband compact CMOS variable gain amplifier

A novel low-voltage wideband CMOS variable gain amplifier (VGA) is proposed. Using a 0.13 /spl mu/m CMOS technology, the VGA exhibits a linear-dB controllable gain range of 40 dB with a bandwidth in excess of 130 MHz, while drawing only 50 /spl mu/A from a single 1 V power supply voltage.     

Admissible slopes for monotone and convex interpolation

Summary In many applications, interpolation of experimental data exhibiting some geometric property such as nonnegativity, monotonicity or convexity is unacceptable unless the interpolant reflects these characteristics. This paper identifies admissible slopes at data points of variousC ¹ interpolants which ensure a desirable shape. We discuss this question, in turn for the following function classes commonly used for shape preserving interpolations: monotone polynomials,C ¹ monotone piecewise polynomials, convex polynomials, parametric cubic curves and rational functions.     

A study on charge reduction in HfO/sub 2/ gate stacks

Charge in metal-organic chemical vapor deposition-grown HfO/sub 2/ gate stacks has been systematically studied using nMOS capacitors. It is found that, for these films, the charge in the stack is mainly concentrated at the interfaces between the layers and is negative at the HfO/sub 2//interfacial layer (IL) interface and positive at the Si/IL interface. In general, the calculated charge densities at both interfaces are of order 10/sup 12/ cm/sup -2/. A forming gas anneal (FGA) reduces both interface charge greatly. The FGA can also significantly reduce the hysteresis and interface state density. The effects of post deposition anneal at various temperatures and under various ambients have also been studied. It is found that a high-temperature dilute oxidizing ambient anneal followed by an FGA reduces the charge at both interfaces.     

Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Outage capacities and optimal power allocation for fading multiple-access channels

We derive the outage capacity region of an M-user fading multiple-access channel (MAC) under the assumption that both the transmitters and the receiver have perfect channel side information (CSI). The outage capacity region is implicitly obtained by deriving the outage probability region for a given rate vector. Given a required rate and average power constraint for each user, we find a successive decoding strategy and a power allocation policy that achieves points on the boundary of the outage probability region. We discuss the scenario where an outage must be declared simultaneously for all users (common outage) and when outages can be declared individually (individual outage) for each user.