A neutral gas model for electron swarms

A BGK-type Boltzmann equation for a neutral gas is considered as a model for electron swarms, because the gas and the electron Boltzmann equation have a common diffusion approximation. Both full- and half-range theory are developed using orthogonality methods of solution. Preliminary comparisons with diffusion theory are presented.     

Determination of anions in rainwater by capillary electrophoresis with conductivity detection

A routine method for the determination of chloride, nitrate and sulfate anions in rainwater by capillary electrophoresis was developed. The system uses an end-column non-suppressed conductivity detector. Linear calibration plots were generated from 0.050 to 20 mg/l, which is the range generally found in wet depositions. Accuracy and precision were evaluated by analyzing certified standards of simulated rainwater and environmental samples, or by comparing CE results with those obtained by IC, the reference technique for anion analysis in wet deposition. The reproducibility of the method was satisfactory except at the lower and upper limits of the analytical range. Sensitivity lay in the range of few μg/l.     

Use of capillary gas chromatography/sensory analysis as an additional tool for sampling technique comparison in peach aroma analysis

Capillary GC/sensory analysis was used to judge if dynamic headspace on sliced pulp and on intact fruit, and solvent extraction could collect the “character impact” and the “contributory” aroma compounds in peaches. Capillary GC/sensory data showed that the headspace techniques selectively recovered the “contributory” volatile compounds, which are strictly related to the characteristic odor of the various peach cultivars, whereas solvent extraction better quantified the “character impact” compounds (lactones).     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Effect of core size on the partition of organic solutes in the monolayer of water-soluble nanoparticles: an ESR investigation

ESR spectroscopy has been used to study the interaction of para-pentylbenzyl hydroxyalkyl nitroxide with the monolayer of water-soluble protected gold clusters having a core diameter ranging from 1.6 to 5.3 nm. The solubilization of the nitroxide probe in the more hydrophobic environment of the monolayer strongly depends on the size of the gold core. In particular, the partition equilibrium constant increases as the nanoparticle diameter decreases. These results have been attributed to the different packing of the chains in the monolayer resulting from the different radius of curvature of the investigated nanoparticles. This represents, to the best of our knowledge, the first report demonstrating that the core size of metallic nanoparticles affects the solvating properties of the protective organic monolayer.     

Polymer-supported O-alkylisoureas: useful reagents for the O-alkylation of carboxylic acids

Polymer-supported O-alkylisoureas were prepared by reaction of an alcohol with a polymer-supported carbodiimide under copper(II) catalysis. These reagents were used to transform carboxylic acids into the corresponding methyl, benzyl, allyl, and p-nitrobenzyl esters in a highly chemoselective manner in high yields and in very high purity after simple resin filtration and solvent evaporation. The reactions could be carried out using both conventional or microwave heating, with reaction times as short as 3-5 min in the latter case, without compromising yield, purity, or chemoselectivity. Unfortunately, the corresponding solid-supported tert-butyl isoureas could not be prepared.     

Stereospecific synthesis of 2,3-disubstituted 1,4-benzodioxans

The synthesis of cis- and trans-2-methyl-3-phenyl-1,4-benzodioxans 4 and 5 , from 1-phenyl-2-[2-(hydroxy)-phenoxy]propanols threo 2 and erythro 3 are described.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.