Covalent Adaptable Microstructures via Combining Two-Photon Laser Printing and Alkoxyamine Chemistry: Toward Living 3D Microstructures

Manufacturing programmable materials, whose mechanical properties can be adapted on demand, is highly desired for their application in areas ranging from robotics, to biomedicine, or microfluidics. Herein, the inclusion of dynamic and living bonds, such as alkoxyamines, in a printable formulation suitable for two-photon 3D laser printing is exploited. On one hand, taking advantage of the dynamic covalent character of alkoxyamines, the nitroxide exchange reaction is investigated. As a consequence, a reduction of the Young´s Modulus by 50%, is measured by nanoindentation. On the other hand, due to its “living” characteristic, the chain extension becomes possible via nitroxide mediated polymerization. In particular, living nitroxide mediated polymerization of styrene results not only in a dramatic increase of the volume (≈8 times) of the 3D printed microstructure but also an increase of the Young's Modulus by two orders of magnitude (from 14 MPa to 2.7 GPa), while maintaining the shape including fine structural details. Thus, the approach introduces a new dimension by enabling to create microstructures with dynamically tunable size and mechanical properties.     

Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.     

A new heuristic algorithm solving the linear ordering problem

The linear ordering problem is an NP-hard combinatorial problem with a large number of applications. Contrary to another very popular problem from the same category, the traveling salesman problem, relatively little space in the literature has been devoted to the linear ordering problem so far. This is particularly true for the question of developing good heuristic algorithms solving this problem.In the paper we propose a new heuristic algorithm solving the linear ordering problem. In this algorithm we made use of the sorting through insertion pattern as well as of the operation of permutation reversal. The surprisingly positive effect of the reversal operation, justified in part theoretically and confirmed in computational examples, seems to be the result of a unique property of the problem, called in the paper the symmetry of the linear ordering problem. This property consists in the fact that if a given permutation is an optimal solution of the problem with the criterion function being maximized, then the reversed permutation is a solution of the problem with the same criterion function being minimized.     

AES investigations of the iron surface composition after laser irradiation under atmospheric conditions

The laser induced modification of iron surfaces with atmospheric species was investigated by means of Auger electron spectroscopy (AES) and scanning electron microscopy (SEM). Different laser systems were used for irradiating iron samples in a wide range of the laser processing parameters up to small foci and ultra short pulses.A nitriding of iron connected with an oxidation of the near surface region was observed in the wavelength range between 193 nm and 10.6 m using large foci (0.1 cm²) and short pulses (10...1400ns). In case of small foci (7·10^–6cm²) with ns-pulses (50 ns) an enrichment of the iron melt with nitrogen and an advanced oxidation of the surrounding area of the laser spot were detected. When using shorter pulses (200 fs, 40 ps) no indications for a nitriding were found.     

Generation of Ethyl Metathiophosphate by Thermal Fragmentation of O-Ethyl N-Substituted Phosphoramidothioates

O-Ethyl N-1-adamantylphosphoramidothioate was synthesized and found to fragment on heating in inert solvents to form the pyrophosphate AdNHP(S)(OEt)OP(S)(OEt)OH. The proposed mechanism involves an elimination of the amine portion with release of ethyl metathiophosphate (EtOP(S)O), as was confirmed in previous work for the comparable structure with oxygen. This transient compound then phosphorylates the starting phosphoramidothioate. O-Ethyl N,N-diethylphosphoramidothioate was also synthesized, and while it gave a similar pyro compound on heating, the reaction mixture was more complex. Both phosphoramidothioates, however, served effectively as thiophosphorylating agents toward alcohols, a silanol, and the silanol groups on the surface of silica gel. Exploratory experiments showed that these phosphoramidothioates also could thiophosphorylate the OH group of a monoester of phosphoric acid, as well as that of phosphinic acids, forming anhydrides with the partial structure     

Synthesis of Oligosaccharide Structures from the Lipopolysaccharide of Moraxella catarrhalis

The synthesis of the octasaccharide [p-(trifluoroacetamido)phenyl]ethyl 4-O-[2-O-(2-acetamido-2-deoxy-alpha-D-glucopyranosyl)-beta-D-glucopyranosyl]-6-O-[2-O-[4-O-(4-O-alpha-D-galactopyranosyl-beta-D-galactopyranosyl)-alpha-D-glucopyranosyl]-beta-D-glucopyranosyl]-3-O-beta-D-glucopyranosyl-alpha-D-glucopyranoside, representing the outer part of the lipooligosaccharide from Moraxella catarrhalis serotype A, is described, together with a hepta-, a hexa-, and a pentasaccaride, composing parts thereof with shorter oligosaccharide chains substituted in the 6-position of the central 3,4,6-branched glucose moiety. The versatility of the use of thioglycosides in oligosaccharide synthesis is shown, since throughout the synthesis thioglycosides are used as glycosyl donor precursors, either directly in dimethyl(methylthio)sulfonium triflate (DMTST)-promoted coupling reactions or after conversion to the corresponding glycosyl bromide in silver triflate-promoted couplings. The effects of different protecting groups, anomeric leaving groups, and solvents used in the various coupling reactions are often substantial, which necessitates the use of easily convertible intermediates.     

Semi-preparative liquid-chromatographic separation of all four stereoisomers of α-bisabolol on tribenzoylcellulose

Summary A semi-preparative low-pressure liquid-chromatographic procedure using tribenzoylcellulose has been developed for the separation and isolation of the four -bisabolol stereoisomers. Stereochemical assignments were made by HPLC-polarimeter coupling and by using the authentical isomers. This method can be applied to the quality control of chamomile preparations, as it allows the detection of adulterations resulting from admixtures of synthetic -bisabolol. In addition, the isolation of all four -bisabolol stereoisomers from commercially available synthetic -bisabolol has been made possible.     

Importance of REP values when comparing the CALUX bioassay results with chemoanalyses results Example with spiked vegetable oils

Differences between chemical activated luciferase gene expression (CALUX) bioassay and chemoanalyses results are observed.This paper shows that calculations of the TEQ values using REP values instead of WHO TEF values give different results. The REP values do affect the results obtained by the CALUX technique. These differences are more marked for the dioxin like PCB compounds (CALUX TEQ values are lower than WHO TEQ values) than for the dioxin compounds (CALUX TEQ values are higher than WHO TEQ values).The CALUX results were compared with the concentrations of the congeners’ spiked into the oil.