Interactions of single-stranded DNA on microcantilevers

The microcantilever approach has attracted considerable attention in recent years as a means of label-free detection of a variety of biomolecular and chemical reactions. The underlying physics of the intermolecular interactions that result in mechanical motions is yet to be fully explored, but it seems both rich in science and of technological importance. This paper presents an overview of experiments and theories related to interactions of single-stranded DNA immobilized on microcantilevers. Experiments and theories show that, at high grafting density, hydration forces are the dominant factor determining cantilever deflections, not electrostatics or conformational entropy.     

为实现准等熵压缩的波阻抗梯度飞片的实验研究

采用粉末冶金方法,制备出波阻抗沿厚度方向呈特定分布的WMoTi体系梯度飞片,在二级轻气炮上进行了梯度飞片击靶实验的初步研究.结果表明,利用梯度飞片可以实现对靶样品的准等熵压缩,击靶后产生的波阵面是平缓、连续上升的,明显不同于冲击压缩的陡峭波阵面,靶面压力峰值最高达到了167GPa.波阻抗按二次函数分布的梯度飞片能够获得最佳的击靶波形 关键词： 波阻抗梯度飞片 准等熵压缩     

温度对潜望式激光通信终端SiC反射镜性能影响

分析了温度梯度和均匀温度对潜望式激光通信终端反射镜形变的影响,利用椭圆域上的Zernike多项式对椭圆反射镜的波前进行拟合,计算由于热形变导致的波前畸变误差,给出了星间激光通信终端反射镜均方根值、发射光束瞄准误差、接收端光强随温度梯度和均匀温度的变化关系。结果表明:温度梯度对反射镜的影响只是引起峰值光强的漂移和少许下降,当温度梯度为14 ℃/m时瞄准误差达2.1 μrad。均匀温度会引起接收端的光强分布变化,从而导致很大的瞄准误差和光强衰减,当均匀温度与参考温度的差值小于0.6 ℃时,由波前畸变误差引起的瞄准误差小于1 μrad,当差值大于0.6 ℃时,瞄准误差突然增大到几μrad,接收端光强分布发生变化,此时反射镜热形变引起的像散项对光强分布起重要作用。     

Phase‐separated,conducting composites from polyaniline and benzobisthiazole rigid‐rod polymer

As an alternative method for processing polyaniline (PANI) from its conducting (protonated) state, vacuum casting of PANI from a methanesulfonic acid (MSA) solution provided films with electrical conductivity values of about 130–150 S/cm. In addition, we similarly prepared blended films of PANI · MSA and poly(p‐phenylene benzobisthiazole) (PBZT). This process eliminated the need for a subsequent protonation step and had the additional advantage that the conjugated PBZT may provide alternative conducting pathways. Conductivity values of the composite films ranged from 100 pS/cm to 124 S/cm, and the films displayed critical concentration behavior with a PANI threshold concentration of 2.75% and a critical exponent of 4. Transmission electron micrographs displayed phase‐separated regions with PANI forming a continuous network at high concentrations. Thermogravimetric analysis results demonstrated the thermal and thermooxidative stability advantage of the blends due to the PBZT component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2539–2548, 2001     

Synthesis and Properties of pH-Responsive Polymers with Cadaverine Side Groups

A water-soluble monomer N¹-(4-vinylbenzyl)-pentane-1,5-diamine dihydrochloride (VBPDA) with cadaverine (1,5-pentanediamine) group was synthesized. pH-responsive polymer with cadaverine group was obtained by free radical polymerization of VBPDA using 4,4-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The structure and molecular weight of the polymer were characterized by FTIR, ¹H-NMR and GPC-MALLS. Aggregation behavior of the polymer in aqueous solution was investigated by dynamic light scattering (DLS), UV-Vis and fluorescence measurements. The experimental results show that the fluorescence intensity of the aggregates decreases and the size of the aggregates increases with increasing pH due to the continuous dehydration of the cadaverine side groups.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

In situ sol–gel preparation of high transparent fluorinated polyimide/nano-MgO hybrid films

Hybrid nanocomposite films of magnesium oxide (MgO) in fluorinated polyimide (PI) from 4, 4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) and 4, 4′-Diaminodiphenyl ether (ODA) have been successfully fabricated via an in situ sol–gel polymerization technique. The MgO content in hybrid films was varied from 0 to 5 wt%. The hybrid films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), ultraviolet–visible (UV–Vis) spectroscopy and thermal gravimetric analyses (TGA). The results of FTIR, XRD and FESEM showed that the MgO nanoparticles were well dispersed in the polymer matrix due to the coordination between the carbonyl group of polymers and Mg atom, and the as-prepared hybrid films exhibited excellent optical transparency in the visible region and good UV-shielding properties in the UV region. Although the thermal stability of the hybrid films is slight inferior to pure PI, it is still good for the practical application below the temperature of 300 °C.     

Facile and surfactant-free synthesis of SnO<Subscript>2</Subscript>-graphene hybrids as high performance anode for lithium-ion batteries

A facile microwave-assisted ethylene glycol method is developed to synthesize the SnO₂ nanoparticles dispersed on or encapsulated in reduced graphene oxide (SnO₂-rGO) hybrids. The morphology, structure, and composition of SnO₂-rGO are investigated by scanning electron microscopy, transmission electron microscope, thermo-gravimetric analyzer, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The electrochemical performance of SnO₂-rGO as anode materials for lithium-ion batteries was tested by cyclic voltammetry, galvanostatic charge–discharge cycling, and rate capability test. It is found that the SnO₂ nanoparticles with a uniform distribution have p-type doping effect with rGO nanosheets. The as-prepared SnO₂-rGO hybrids exhibit remarkable lithium storage capacity and cycling stability, and the possible mechanism involved is also discussed. Their capacity is 1222 mAhg^?1 in the first cycle and maintains at 700 mAhg^?1 after 100 cycles. This good performance can be mainly attributed to the unique nanostructure, good structure stability, more space for volume expansion of SnO₂, and mass transfer of Li⁺ during cycling.     

Total Syntheses of (−)‐Isoschizogamine and (−)‐2‐Hydroxyisoschizogamine

Total syntheses of (?)‐isoschizogamine and (?)‐2‐hydroxyisoschizogamine are described. The synthesis employs two asymmetric Michael additions to establish chiral centers at C7 and the quaternary carbon C20. Regioselective reduction of the methylthioiminium cation rather than the enamine generates an isoschizogamine‐type pentacyclic skeleton. Acidic hydrolysis of the isoschizogamine‐type intermediate in the absence of oxygen provides natural (?)‐isoschizogamine. Conducting the reaction in the presence of oxygen leads to a multistep oxidative hydrolysis cascade that affords unnatural (?)‐2‐hydroxyisoschizogamine.