Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.     

微波BJT超宽带低噪声放大器的设计

本文给出了一种频带覆盖达１０－１６００ＭＨｚ的微波ＢＪＴ超宽带低噪声放大器的设计方法，从微波ＢＪＴ的噪声模型出发，通过拟合５０Ω源阻抗下微波ＢＪＴ的噪声系数ＮＦ５０和Ｓ参数来提取其噪声参数，然后根据增益，噪声及驻波比要求优化设计放大器，使放大器在超宽带范围内获得平坦增益和低噪声，本文所给出的微波ＢＪＴ惨数提取及放大器优化设计方法已由实验结果所验证。     

介质加载圆柱腔的场分析

本文应用严格场匹配法解决了介质加载圆柱腔的本征问题，计算了圆柱腔在纵向部分填充介质后ＴＥ０１ｎ模和ＴＭ０１ｎ模的本征频率和本征场型的变化。特别分析了本征模式在空气段为截止模的情况。本文的分析方法亦可应用到纵向部分填充介质的传输线和其它形状的谐振腔。     

用稳态反饱和吸收法测量C_（60）的激发态吸收截面

用准连续激光实现了Ｃ６０的稳态反饱和吸收，通过实验和理论计算的拟合，确定了Ｃ６０的三重第一激发态吸收截面。     

中国西南武陵山区跳蛛新种记述（蜘蛛目：跳蛛科）

本文记述跳蛛科13个新种,采自西南武陵山地区。暗跳蛛Asemonea、列锡蛛Lycidas和法老蛛Pharacocerus 3属为我国新记录属。     

Competitive influence of atactic polystyrene and supercritical carbon dioxide on the conformation of syndiotactic polystyrene

The crystallization behavior of miscible syndiotactic polystyrene (sPS) and atactic polystyrene (aPS) blends with different sPS/aPS weight ratios was investigated in supercritical CO₂ by using Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Supercritical CO₂ and aPS exhibited different effects on the conformational change of sPS and competed with each other. Increasing the content of amorphous aPS in the blends made its effect on the conformational change of sPS gradually surpass that of supercritical CO₂. Supercritical CO₂ favored the formation of the helical conformation of sPS in lower temperature range and the all trans planar conformation in higher temperature range, instead of forming the latter one only in higher temperature range in ambient atmosphere. However, increasing aPS content in the blends pushed the range for forming the helical conformation to lower temperature and made the all trans planar conformation dominant in aPS/sPS 25/75 blend after treating in supercritical CO₂ above 60 °C. The all trans planar zigzag conformation was more favorable than the helical conformation after mixing aPS in sPS in supercritical CO₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1755–1764, 2007     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

钻石型等级晶格上Gauss模型的临界性质

在Gauss模型中 ,假设Gauss分布常数依赖于晶格格点的配位数 ,并且满足关系bqi/bqj=qi/ qj( qi是格点i的配位数 ,bqi是格点i上的Gauss分布常数 ) .利用重整化群变换和自旋重标相结合的方法 ,研究了一族钻石型等级晶格上Gauss模型的临界行为 .结果发现 :这些晶格的铁磁相变性质属于同一普适类 ,其临界点和临界指数分别为K =b_qi/ q_i 和ν=1 / 2 .     

中国六种管巢蛛记述（蜘蛛目：管巢蛛科）

本文记述我国管巢蛛6种,即白马管巢蛛Clubiona baimaensis sp. nov.、朝鲜管巢蛛C. corena Paik 金氏管巢蛛C. kimyongkii Paik、琴形管巢蛛C. lyriformis sp. nov.、臼齿管巢蛛C. moralis sp. nov.和江原管巢蛛C. wolchongsensis Paik。其中3种为新种,3种为我国新纪录。文中并提出,乌苏里管巢蛛C. ussurica Michailov(♀)可能与金氏管巢蛛(♂)为同种,因而乌苏里管巢蛛的拉丁字名应为后一种的同物异名。