Three new dibenzofurans from Cydonia oblonga Mill

Abstract

Phytochemical investigation of Cydonia oblonga Mill. collected in Xinjiang province, China, led to the isolation and identification of three new dibenzofurans (1-3) along with one known compound (4). Their structures were elucidated based on HRESIMS, spectroscopic data (IR, UV, 1D, 2D NMR) and X-ray diffraction analysis.     

Intensity Moments of Hermite-Cosh-Gaussian Laser Beams

In this paper,attention is focused on the intensity moments of the Hermite-Cosh-Gaussian (HChG) laser beams from the zero-order to the fourth-order.The frequently used parameters such as the power in bucket (PIB),the beam width,the curvature radius,the far field divergence,the M2-factor,the Rayleigh length and the kurtosis are calculated in terms of the intensity moments.Figures show the influence of the mode index and the decentered parameter,which are the critical parameters of the HChG beams.Moreover,the center of the gravity of the radiation field and the symmetry are discussed along with the propagation axis.Finally,the power fraction within the beam width defined by the second moments is illustrated with numerical method.     

Enhanced dielectric properties of lead barium zirconate thin films by manganese doping

(Pb_0.5Ba_0.5)ZrO₃ (PBZ) and 1 mol% Mn-doped (Pb_0.5Ba_0.5)ZrO₃ (Mn-PBZ) sol were successfully fabricated, and corresponding thin films were deposited on Pt(1 1 1)/TiO₂/SiO₂/Si(1 0 0) substrates by spin-coating method. Effects of Mn doping on the microstructure and electrical properties of PBZ thin films were investigated systemically. X-ray diffraction patterns showed that both films had a polycrystalline perovskite structure, and that the degree of (1 1 1) orientation were increased by Mn doping. Dielectric measurements illustrated that Mn-doped PBZ thin films not only had a larger dielectric constant, but also possessed a smaller dielectric loss. Accordingly, the tunability and the figure of merit of PBZ films were improved by Mn doping.     

The pure-shear mode solidly mounted resonator based on c-axis oriented ZnO film

In this paper, we fabricate a pure-shear mode film bulk acoustic resonator based on c-axis oriented ZnO film. The resonator is consisted of an in-plane electrode, a highly c-axis oriented ZnO film and a SiO₂/W Bragg reflector. The shear mode wave is excited by the lateral electric field. The resonator works in a pure-shear mode with the resonance frequency near 1.5 GHz and the Q-factor of 479 in air. There is no obvious longitudinal mode resonance in the frequency response, which can be explained that the electric field component normal to the surface is very weak and the Bragg reflector has the effective frequency selectivity for the shear mode. Importantly for sensors, the immersion into de-ionized water and glycerol liquid still allows for a Q-factor up to 335 and 220, respectively. This resonator shows the potential as mass loading sensors for biochemical application.     

A Straightforward Immunoassay Applicable to a Wide Range of Antibodies Based on Surface Enhanced Fluorescence

A straightforward immunoassay based on surface enhanced fluorescence (SEF) has been demonstrated using a fluorescent immune substrate and antibody functionalized-silver nanoparticles. Unlike the conventional SEF-based immunoassay, which usually uses the dye-labeled antibodies and the metallic nanostructured-substrates, the presented immune system does not need the antibodies to be labeled with dye molecules. Thus, this immunoassay can be easily applied to the detection of a wide range of target antigens, which is of great importance for its practical application. The experimental results show that this immunoassay has a good specificity as well as the capacity of quantitative detection. Basically, the surface density of the immuno-adsorbed silver nanoparticles increases with the increased amount of target antigens, resulting in a fluorescence enhancement up to around 7 fold. The dose-responsive performance of the immunoassay has been investigated and the limit of detection (LOD) is 1 ng/mL. Due to its simple preparation method and the wide range of detectable antigens, this presented immunoassay is expected to be helpful for extending the SEF-based application.     

Magnetic Resonance Imaging Segmentation via Weighted Level Set Model Based on Local Kernel Metric and Spatial Constraint

Magnetic resonance imaging (MRI) segmentation is a fundamental and significant task since it can guide subsequent clinic diagnosis and treatment. However, images are often corrupted by defects such as low-contrast, noise, intensity inhomogeneity, and so on. Therefore, a weighted level set model (WLSM) is proposed in this study to segment inhomogeneous intensity MRI destroyed by noise and weak boundaries. First, in order to segment the intertwined regions of brain tissue accurately, a weighted neighborhood information measure scheme based on local multi information and kernel function is designed. Then, the membership function of fuzzy c-means clustering is used as the spatial constraint of level set model to overcome the sensitivity of level set to initialization, and the evolution of level set function can be adaptively changed according to different tissue information. Finally, the distance regularization term in level set function is replaced by a double potential function to ensure the stability of the energy function in the evolution process. Both real and synthetic MRI images can show the effectiveness and performance of WLSM. In addition, compared with several state-of-the-art models, segmentation accuracy and Jaccard similarity coefficient obtained by WLSM are increased by 0.0586, 0.0362 and 0.1087, 0.0703, respectively.     

Co-Production of Dimethyl Carbonate,Dimethoxymethane and Dimethyl Ether from Methanol: Process Design and Exergy Analysis

Dimethyl carbonate is an important green chemical that has been widely used in the chemical industry. In the production of dimethyl carbonate, methanol oxidative carbonylation has been studied, but the conversion ratio of dimethyl carbonate using this method is too low, and the subsequent separation requires a large amount of energy due to methanol and dimethyl carbonate being azeotrope. In this paper, the strategy of “reaction instead of separation” is proposed. Based on this strategy, a novel process is developed to combine the production of DMC with that of dimethoxymethane (DMM) and dimethyl ether (DME). The co-production process was simulated using Aspen Plus software, and the product purity was up to 99.9%. The exergy analysis of the co-production process and the existing process was carried out. The exergy destruction and exergy efficiency were compared with those of the existing production processes. The results show that the exergy destruction of the co-production process is about 276% less than that of the single-production processes, and the exergy efficiencies in the developed co-production process are significantly improved. The utility loads of the co-production process are significantly lower than that of the single-production process. The developed co-production process increases the methanol conversion ratio to 95%, with a reduced energy requirement. It is proved that the developed co-production process can provide an advantageous option over the existing processes with improved energy efficiency and material savings. The strategy of “reaction instead of separation” is feasible. A new strategy is proposed for azeotrope separation.