Investigation of polycarbonate/acrylonitrile butadiene styrene/multiwall carbon nanotube nanocomposites under impact loading

In this study, the effect of polycarbonate (PC)/acrylonitrile butadiene styrene (ABS)‐reinforced multiwall carbon nanotube (MWCNT) nanocomposites under a high‐velocity impact was investigated. PC/ABS (70/30 w/w)/MWCNT nanocomposites containing 1, 2, and 4 wt% were used to manufacture samples for this study. The samples were fabricated in sheet form with 100 × 100 mm dimensions and tested by gas gun for high‐velocity impact tests. The experimental results indicate that the energy absorption, limit velocity, and tensile modulus of the nanocomposite samples increased by approximately 121%, 52%, and 103% for the PC/ABS (70/30 w/w)/2 wt% MWCNT samples respectively. These results were confirmed by a transmission electron microscopy analysis test that was conducted for the state of dispersion of MWCNTs in the nanocomposite samples. The transmission electron microscopy results show that the best morphological structure of carbon nanotube at the interface of PC and ABS is that for the nanocomposite containing 2 wt% MWCNTs, which led to improved interface of the nanocomposites and higher mechanical properties. Copyright © 2016 John Wiley & Sons, Ltd.     

A Crest Factor Reduction Scheme with Optimum Spacing Peak Cancellation for Intra-band Non-contiguous Carrier Aggregated OFDM Signals

Wireless Personal Communications - Recent development in communications have increased the demand of internet protocol (IP)-based multimedia conferencing services. Session initiation protocol (SIP)...     

Absolute Value Equations with Tensor Product Structure: Unique Solvability and Numerical Solution

Applications of Mathematics - We consider the absolute value equations (AVEs) with a certain tensor product structure. Two aspects of this kind of AVEs are discussed in detail: the solvability and...     

Joint Reliability Function of Coherent Systems with Shared Heterogeneous Components

In this paper, we consider two coherent systems having shared components. We assume that in the two systems there are three different types of components; components of type one that just belong to the first system, components of type two that lie only in the second system and components of type three that are shared by the two systems. We use the concept of joint survival signature to assess the joint reliability function of the two systems. Using this concept, some representations for the joint reliability function of the system lifetimes are obtained under two different scenarios of component failures. In the first scenario, we assume that the components of the systems fail according to different counting processes such as non-homogeneous Poisson processes. In the second scenario, it is assumed that the component lifetimes of each type are exchangeable while the three types of component lifetimes can be independent or dependent. To illustrate the theoretical results, two systems with shared components are studied numerically and graphically.

     

Achieving maximum bit rate in a cognitive radio network with physical layer network coding

In this paper, the power allocation problem in a relay‐assisted cognitive radio network (CRN) is considered where the secondary users exchange information in an interweave mode on the basis of physical layer network coding. In order to enhance the capacity of CRN, using multiple‐input multiple‐output and orthogonal frequency division multiplexing has become very popular in the literature. This paper goes one step further to improve the throughput of secondary users using physical layer network coding by drawing off the transmission time. The main goal is to maximize the capacity of CRN, while keeping the total interference imposed on the primary users under a certain threshold. An optimal solution to this power allocation problem with limited relay power constraint, due to the limited budget, is derived; however, because of the high complexity of this method, an efficient suboptimal solution is also proposed.     

Modified Magnetite Nanoparticles for Hexavalent Chromium Removal from Water

Water treatment is an important concern of human societies. Using magnetic nanoparticles as adsorbents for metal removal has been greatly considered due to their particular characteristics such as small sizes, high surface area to volume ratios, and good magnetic properties. In the present study, a modification was implemented in magnetite particles by functionalized carbon nanotubes and carboxylic groups to enhance the performance of magnetite particles in removing hexavalent chromium from water using the adsorption method. The applicability of the nanoadsorbent and magnetic nanoparticles was compared based on adsorption factors affecting the chromium removal including pH, contact time, pollutant concentration, and the adsorbent amount. Properties of the nanocomposites were analyzed by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results show that the highest percentage of Cr (VI) removal for both adsorbents was under acidic ambient conditions and lasted less than 45 minutes. The study of Langmuir, Freundlich, and Temkin isotherms in the prediction of adsorption behavior revealed that the Langmuir model better fitted the adsorption equilibrium data. The kinetic analysis of pseudo-first and second-order equations showed that the pseudo-second-order equation was more suitable for describing the kinetic behavior of data. Moreover, the obtained nanocomposite had a better performance in Cr (VI) removal from water in comparison to magnetite nanoparticles.     

Synthesis of 2-aroylfuran and novel 3,5-diaroyl-4-arylisoxazole derivatives by ring contraction of pyrylium salts

Research on Chemical Intermediates - Ring contraction of 2,4,6-triarylpyrylium perchlorates by use of sodium nitrite mediated by ionic liquid has been used as a new, direct, and environmentally...     

One-pot multi-component synthesis of novel chromeno[4,3-b]pyrrol-3-yl derivatives as alpha-glucosidase inhibitors

Molecular Diversity - A green and efficient one-pot multi-component protocol was developed for the synthesis of some novel dihydrochromeno[4,3-b]pyrrol-3-yl derivatives through the reaction of...     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.