红外图像掠海小目标的检测算法研究

针对红外图像掠海小目标信噪比低，且易受到水天线和背景杂波干扰的特点，提出了一种红外掠海小目标的提取与检测算法。该方法的特点是：首先采用中值滤波来减小噪声，并提出了差方和算法，用以抑制背景噪声并对目标增强；再采用了图像行扫描法有效地滤除水天线；最后通过弱化背景边缘和阈值分割等综合算法得到候选小目标。仿真结果表明，该算法达到了较好的效果。     

大米中硒的FI-HG-AAS测定方法研究

研究了原子化器温度、载气流速、KBH4 浓度等条件对流动注射 氢化物发生 原子吸收光谱法 (FI-HG -AAS)测定硒时的影响。建立了FI-HG -AAS测定大米中硒的分析方法。在优化的工作条件下 ,测定硒的最低检测浓度为 0 3 3 μg·L- 1,线性范围为 0～ 5 0 μg·L- 1,相对标准偏差小于 4% ,加标回收率为 94%～ 1 0 2 %。本法克服了传统的间断氢化物发生 原子吸收光谱法分析速度慢、样品耗量大、操作繁琐且因手工进样在进样速度和进样体积上容易带来误差等缺点。方法操作简便、快速 ,灵敏度及自动化程度高 ,已广泛应用于大米及富硒大米中微量硒的测定     

基于人工神经网络的商业银行信用风险模型

在对人工神经网络的基本原理进行简要介绍的基础上 ,着重对构建商业银行信用风险的人工神经网络模型进行了研究 ,实证结果表明 ,人工神经网模型具有很高的预测精度     

GM(1,1)改进模型及其应用

根据 GM( 1 ,1 )灰色模型的指数特性 ,通过在区间上求积分给出了关于背景值的一个比较确切的计算公式 ,讨论了由此建立的 GM( 1 ,1 )改进模型的适用范围和预测精度 .结果表明改进模型比原 GM( 1 ,1 )模型适用性要强、模拟和预测精度要高 ,不仅适用于低增长序列、也适用于高增长序列 ,不仅适用于短期预测 ,同样也适用于中、长期预测     

强度调制型光纤传感器信号补偿技术的现状与应用

简要地介绍了强度调制光纤传感器的特点,着重分析和比较目前国内外五种有代表性的强度调制型光纤传感器信号补偿方法及其应用状况.     

Unified analytical expressions for calculating resonantfrequencies, transimpedances, and equivalent input noise currentdensities of tuned receiver front ends

Unified analytical expressions have been derived for calculating the resonant frequencies, transimpedance and equivalent input noise current densities of the four most widely used tuned optical receiver front ends built with FETs and p-i-n diodes. A more accurate FET model has been used to improve the accuracy of the analysis. The Miller capacitance has been taken into account, and its impact on the performances of the tuned front ends has been demonstrated. The accuracy of the expressions has been verified by Touchstone simulations. The agreement between the calculated and simulated performances of the front ends is very good. The expressions can be used to investigate the performances of different tuned front ends in a very simple way and provide a good starting point for further computer optimizations of the front ends     

I．O．T．旧梦成真

该文较详细地介绍了Ｉ．Ｏ．Ｔ管的发展历程，其特点及工作方式。     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

A method for designing high-power offset Cassegrain antennas

Starting from the geometrical parameters of the feed and the desired gain of the Cassegrain antenna, a method to determine the design starting parameters for a high-power offset Cassegrain antennas is discussed. Then, by numerically solving the equations governing the antenna geometry, a set of design curves are obtained, with which the structure of the antenna can be determined by trading off the electrical and geometrical system requirements. The method presented can be applied to both high or low gain feeds for constructing a high power microwave electromagnetic environment, where complex electronic systems can be tested. For linearly polarized feeds with high gain, the structure parameters of antenna with zero cross polarization can be obtained, which is equal to the design results of Brown and Prata (see IEEE Trans. Antennas Propagat., vol.42, no.8, p.1145-53, 1994)