Gelation behavior of thermoplastic-modified epoxy systems during polymerization-induced phase separation

The rheological behavior and gelation characteristics of epoxy blends are of critical importance to property study and industrial application. In this work, we studied the rheological behavior and structural transition of different thermoplastics, including polyetherimide, polymethylmethacrylate, and polyethersulfone (PES), modified epoxy systems by using rheometry instrument, differential scanning calorimetry, time-resolved light scattering, and scanning electronic microscopes. At the same molecular weight level of thermoplastics, different epoxy blends show profound diversities on the rheological and gelation behavior due to the large differences in phase separation and curing process. For early phase-separation systems of PES-modified epoxy blends, two gel points are identified, which correspond to physical gelation and chemical gelation, respectively. With the variation of the PES molecular weight and curing rate, dramatic changes in gel time and critical exponent were observed. As the molecular weight of thermoplastics is increased, the gelation time becomes shorter and the gel strength gets lower, while the faster curing rate would increase the physical gel strength significantly.     

Structural and electrochemical properties of high-capacity Ml-Mg-Ni-based hydrogen storage alloys

The Ml-Mg-Ni-based (Ml = La-rich mixed lanthanide) hydrogen storage alloy Ml_0.88Mg_0.12Ni_3.0-Mn_0.10Co_0.55Al_0.10 was prepared by inductive melting. The micro-structure was analyzed by XRD and SEM. The alloy consists mainly of CaCu₅-type phase, Ce₂Ni₇-type phase and Pr₅Co₁₉-type phase. The electrochemical measurements show that the maximum discharge capacity is 386 mAh/g, 16.3% higher than that of the commercial AB₅-type alloy (332 mAh/g). At discharge current density of 1 100 mA/g, high rate dischargeability is 62%, while that of the AB5-type alloy is only 45%. The discharge capacity decreases to 315 mAh/g after 300 charge/ discharge cycles, 81.5% of the maximum discharge capacity. __________ Translated from Journal of Xi’an Jiao Tong University, 2008, 42(3) (in Chinese)     

Tetraphenylpyrazine-based AIEgens: facile preparation and tunable light emission

Research on aggregation-induced emission (AIE) has been a hot topic. Due to enthusiastic efforts by many researchers, hundreds of AIE luminogens (AIEgens) have been generated which were mainly based on archetypal silole, tetraphenylethene, distyrylanthracene, triphenylethene, and tetraphenyl-1,4-butadiene, etc. To enlarge the family of AIEgens and to enrich their functions, new AIEgens are in high demand. In this work, we report a new kind of AIEgen based on tetraphenylpyrazine (TPP), which could be readily prepared under mild reaction conditions. Furthermore, we show that the TPP derivatives possess a good thermal stability and their emission could be fine-tuned by varying the substituents on their phenyl rings. It is anticipated that TPP derivatives could serve as a new type of widely utilized AIEgen, based on their facile preparation, good thermo-, photo- and chemostabilities, and efficient emission.     

Synthesis of macrocyclic ligands incorporating sulfur and furan subunits

Abstract

Polyammonium macrocycles containing sulfur and furan units in the macrocyclic ring have been synthesized and studied for ATPase activity. The synthetic methodology involved using tosyl protection for the amines and the formation of macrocyclic Lactams, followed by reduction using borane in THF. Deprotection of the tosylated forms of the macrocycle was accomplished using sodium in butanol for the furan macrocycles, and HBr in HOAc for the sulfur containing macrocycle. The macrocycles were found to be poor catalysts for ATP hydrolysis compared to other similar polyammonium macrocycles.     

Dynamics of ice nucleation on water repellent surfaces

Prevention of ice accretion and adhesion on surfaces is relevant to many applications, leading to improved operation safety, increased energy efficiency, and cost reduction. Development of passive nonicing coatings is highly desirable, since current antiicing strategies are energy and cost intensive. Superhydrophobicity has been proposed as a lead passive nonicing strategy, yet the exact mechanism of delayed icing on these surfaces is not clearly understood. In this work, we present an in-depth analysis of ice formation dynamics upon water droplet impact on surfaces with different wettabilities. We experimentally demonstrate that ice nucleation under low-humidity conditions can be delayed through control of surface chemistry and texture. Combining infrared (IR) thermometry and high-speed photography, we observe that the reduction of water-surface contact area on superhydrophobic surfaces plays a dual role in delaying nucleation: first by reducing heat transfer and second by reducing the probability of heterogeneous nucleation at the water-substrate interface. This work also includes an analysis (based on classical nucleation theory) to estimate various homogeneous and heterogeneous nucleation rates in icing situations. The key finding is that ice nucleation delay on superhydrophobic surfaces is more prominent at moderate degrees of supercooling, while closer to the homogeneous nucleation temperature, bulk and air-water interface nucleation effects become equally important. The study presented here offers a comprehensive perspective on the efficacy of textured surfaces for nonicing applications.     

Reversal effects of traditional Chinese herbs on multidrug resistance in cancer cells

Multidrug resistance (MDR) continues to be a major obstacle for successful anticancer therapy. In this work, fractions from 17 clinically used antitumour traditional Chinese medicinal herbs were tested for their potential to restore the sensitivity of MCF-7/ADR and A549/Taxol cells to a known antineoplastic agent. The effects of these fractions were evaluated by MTT method and an assay of the cellular accumulation of doxorubicin. Fractions from the PB group (herbs with the ability to promote blood circulation and remove blood stasis) showed more significant effects than fractions from the CH group (herbs with the ability to clear away heat and toxic materials). Fractions from CH?Cl? extracts were more effective than fractions from EtOAc extracts. Five herbs (Curcuma wenyujin, Chrysanthemum indicum, Salvia chinensis, Ligusticum chuanxiong Hort. and Cassia tora L.) could sensitise these resistant cancer cells at a non-toxic concentration (10?μg?mL?1), and markedly increased doxorubicin accumulation in MCF-7/ADR cells, which necessitates further investigations on the active ingredients of these herbs and their underlying mechanisms.     

One-pot microwave synthesis of water-dispersible, ultraphoto- and pH-stable, and highly fluorescent silicon quantum dots

Fluorescent silicon quantum dots (SiQDs) are facilely prepared via one-pot microwave-assisted synthesis. The as-prepared SiQDs feature excellent aqueous dispersibility, robust photo- and pH-stability, strong fluorescence, and favorable biocompatibility. Experiments show the SiQDs are superbly suitable for long-term immunofluorescent cellular imaging. Our results provide a new and invaluable methodology for large-scale synthesis of high-quality SiQDs, which are promising for various optoelectronic and biological applications.     

Self-assembly of coil-rod-coil molecules into bicontinuous cubic and oblique columnar assemblies depending on coil chain length

Coil-rod-coil molecules 1–3, consisting of four biphenyls and a p-terphenyl unit linked together with ether bonds as a rod segment and poly(propylene oxide) (PPO) with a degree of polymerization (DP) of 7, 12, 17 as coil segments were synthesized. These molecules contain lateral methyl groups at 2 and 5 positions of the middle benzene ring of p-terphenyl. The self-assembling behavior of molecules 1–3 was investigated by means of DSC, POM and SAXS in the bulk state. Molecule 1 self-organizes into a lamellar structure in the bulk state and transfers into a bicontinuous cubic structure in the liquid crystalline phase. While, molecules 2, 3 containing longer coil chains than 1 self-assemble into the hexagonal perforated lamellar (HPL) structures and the oblique columnar structures in the solid state and liquid crystalline phase, respectively. These results reveal that self-organizing behavior of such molecules is dramatically influenced by the length of the coil chains connected with the rod building block, as well as the lateral methyl groups incorporating in the middle of the rod segment.     

Xylan-type hemicelluloses supported terpyridine–palladium(II) complex as an efficient and recyclable catalyst for Suzuki–Miyaura reaction

Xylan-type hemicelluloses supported terpyridine–palladium(II) as a novel biomass-supported catalyst was synthesized and characterized in terms of morphology, composition, and thermal stability. The nano-Pd catalyst was further explored for Suzuki–Miyaura reaction between arylboronic acid and aryl halide under aerobic condition, with a yield up to 98 %. In particular, the catalyst exhibited both high catalytic activity and stability for Suzuki–Miyaura reaction. Furthermore, the catalyst could be easily recovered by simple filtration and reused at least six times without significant loss of its catalytic activity. This work provides a novel and effective supported catalyst, and broadens the applications of polysaccharides in green catalysis.     

Bio-based and Biodegradable Electrospun Fibers Composed of Poly(L-lactide) and Polyamide 4

Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.