Structural and functional stabilities of artificially designed DNA ultra-thin films grown by silica Assistance

We report the structural and functional stabilities of artificially synthesized DNA ultra-thin films. Fully covered DNA ultra-thin films on a silica substrate were fabricated by the silica-assisted growth method and those samples were then incubated in various chemicals and physical conditions. The DNA ultra-thin films showed high maintainability under those harsh conditions and these results would aid to facilitate the use of artificial DNA ultra-thin films in advanced research areas such as biophotonics and bioelectronics.     

Average capacity for non-Kolmogorov turbulent slant optical links with beam wander corrected and pointing errors

The effects of beam wander corrected and pointing errors on the average capacity of a non-Kolmogorov turbulent atmosphere communication channel are studied. The gamma–gamma irradiance probability density function model has been considered to include the effects of non-Kolmogorov turbulence. An expression for the average capacity under beam wander corrected, pointing errors and the spectral index of refractive-index fluctuation. Simulation results for effects of circular detection aperture of radius, atmosphere turbulence strength and wavelength on average capacity are presented. Our results show that the average capacity has an oscillation in the case of short propagation distance, but in the case of long propagation distance, it has gradually reduced curves. And the turbulence strength has a strong influence on average capacity. In general, turbulence reduces the average capacity; it can reduce average capacity by increasing of the power law α. We can ignore the little effects of wavelength increases on the average capacity.     

Discovery of a new nontoxic cuprate superconducting system Ga-Ba-Ca-Cu-O

Superconductivity is observed in a new nontoxic cuprate system Ga-Ba-Ca-Cu-O,with T_c=82 K for Ga Ba_2Ca_5Cu_6O_(14+δ)(Ga-1256)and T_c=116 K probably for Ga Ba_2Ca_3Cu_4O_(10+δ)(Ga-1234)or Ga Ba_2Ca_2Cu_3O_(8+δ)(Ga-1223),respectively.All compounds are fabricated by solid state reaction method under high pressure and high temperature.Samples are characterized by resistivity,magnetization and X-ray diffraction(XRD)measurements.The temperature dependence of magnetization measured in both zero-field-cooled and field-cooled processes on one sample(S1)shows two superconducting transitions at about 82 K and113 K.The estimated shielding fraction for the phase with T_cof 82 K is about 67%,while the fraction for another phase with T_(c )of 113 K is quite small.The XRD Rietveld refinement for S1 indicates two main phases existing in the sample,Ga-1256 with fraction of about 58%and non-superconducting Ca_(0.85)Cu O_2with fraction of about 42%respectively.Thus,we can conclude the superconducting phase with transition temperature of 82 K is due to Ga-1256.The resistivity measurement also confirms the superconductivity for S1,and the resistivity reaches zero at about 82 K.The temperature dependence of magnetization for another sample(S2)shows much higher superconducting shielding fraction for the phase with T_cof 116 K,which may be a promising prospective for the synthesis of Ga-1234 or Ga-1223 phase.     

Modeling the Effect of Injection Molding Process Parameters on Warpage Using Neural Network Theory

A back propagation artificial neural network (BPANN) prediction model for warpage of injection-molded polypropylene was developed based on an orthogonal design method. The BPANN model was trained by the input and output data obtained from the moldflow software platform simulations. It is proved that the BPANN model can predict the warpage with reasonable accuracy. Utilizing the BPANN model, the effects of the process parameters, packing pressure (Pp), melt temperature (T_me), mold temperature (T_mo), packing time (t_p), cooling time (t_c), and fill pressure (p_f), on the warpage were investigated. The most important process parameter affecting the warpage was Pp, and the second most important was T_me. The rest of the process parameters, T_mo, t_p, t_c, and p_f, were found to be relatively less influential. Warpage increased with elevating T_mo. In contrast, an increase in Pp and T_me caused the warpage to decrease.     

Structure and magnetostriction of Tb0.4Nd0.6(Fe0.8Co0.2) x alloys

Structural, magnetic and magnetostrictive properties of Tb_0.4Nd_0.6(Fe_0.8Co_0.2) _x (1.50 ≤ x ≤ 1.90) alloys have been investigated by means of X-ray diffraction (XRD), a vibrating sample magnetometer and a standard strain technique. XRD analysis shows the presence of single Laves phase with a cubic MgCu₂-type structure for the high Nd content alloy around the composition of x = 1.80, which tends to be formed by curing at relatively low annealing temperature. The easy direction of magnetization at room temperature is observed toward <111> axis, accompanied by a rhombohedral distortion with a large spontaneous magnetostriction λ₁₁₁. An optimized effect on the linear anisotropic magnetostriction, 360 ppm at 3 kOe, was observed for the high Nd content Tb_0.4Nd_0.6(Fe_0.8Co_0.2)_1.80 alloy, which can be attributed to its single Laves phase, the large λ₁₁₁ (~1,520 ppm) of the MgCu₂-type (Tb,Nd)(Fe,Co)₂ phase and the good soft magnetic behaviors.     

Synthesis and characterization of degradable hyperbranched poly(2‐ethyl‐2‐oxazoline)

Hyperbranched poly(2‐ethyl‐2‐oxazoline) was synthesized by a combination of cationic ring‐opening polymerization and the oxidation of thiol to disulfide groups. A three‐arm star poly(2‐ethyl‐2‐oxazoline) (PEtOx) was first synthesized using 1,3,5‐tris(bromomethyl) benzene as an initiator. The star PEtOx was end‐capped with potassium ethyl xanthate. Similarly, a linear PEtOx was synthesized and end‐capped with potassium ethyl xanthate using benzyl bromide as an initiator. Hyperbranched PEtOx was then obtained by in situ cleaving and subsequent oxidation of the star PEtOx and linear PEtOx mixture with n‐butylamine as both a cleaving agent and a base in tetrahydrofuran. The linear PEtOx was used to prevent the formation of gel. The hyperbranched PEtOx can be cleaved with dithiothreitol to trithiol and monothiol polymer. The hyperbranched PEtOx shows no remaining thiols using Ellman's assay. The resulting hyperbranched PEtOx was hydrolyzed to a novel hyperbranched polyethyleneimine with degradable disulfide linkages. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2030–2037     

Low‐Magnetization Magnetic Microcapsules: A Synergistic Theranostic Platform for Remote Cancer Cells Therapy and Imaging

Multifunctional magnetic microcapsules (MMCs) for the combined cancer cells hyperthermia and chemotherapy in addition to MR imaging are successfully developed. A classical layer‐by‐layer technique of oppositely charged polyelectrolytes (poly(allylamine hydrochloride) (PAH) and poly(4‐styrene sulfonate sodium) (PSS)) is used as it affords great controllability over the preparation together with enhanced loading of the chemotherapeutic drug (doxorubicin, DOX) in the microcapsules. Superparamagnetic iron oxide (SPIOs) nanoparticles are layered in the system to afford MMC1 (one SPIOs layer) and MMC2 (two SPIOs layers). Most interestingly, MMC1 and MMC2 show efficient hyperthermia cell death and controlled DOX release although their magnetic saturation value falls below 2.5 emu g^?1, which is lower than the 7–22 emu g^?1 reported to be the minimum value needed for biomedical applications. Moreover, MMCs are pH responsive where a pH 5.5 (often reported for cancer cells) combined with hyperthermia increases DOX release predictably. Both systems prove viable when used as T2 contrast agents for MR imaging in HeLa cells with high biocompatibility. Thus, MMCs hold a great promise to be used commercially as a theranostic platform as they are controllably prepared, reproducibly enhanced, and serve as drug delivery, hyperthermia, and MRI contrast agents at the same time.