Synthesis,Separation and Crystal Structures of <Emphasis Type="Italic">E</Emphasis> and <Emphasis Type="Italic">Z</Emphasis> Isomers of 3-(2,5-Dimethoxyphenyl)-2-(4-Methoxyphenyl)Acrylic Acid

Abstract Synthesis, separation and X-ray crystal structures of E and Z isomers of 3-(2,5-dimethoxyphenyl)-2-(4-methoxyphenyl)acrylic acid are reported. Separation of E and Z isomers from a 1:1 mixture has been carried out by selective acidification of their sodium salts carefully controlling the pH of the solution. The structures of E and Z isomers were confirmed by determining crystal structures of these isomers using single crystal X-ray diffraction. The E isomer crystallizes in the P2₁/c space group with a = 11.493(2) ?, b = 5.5456(11) ?, c = 24.900(5) ?, α = 90°, β = 92.36(3)°, γ = 90°, Z = 4. The Z isomer crystallizes in the P2₁/c space group with a = 10.192(2) ?, b = 12.893(3) ?, c = 13.948(3) ?, α = 90°, β = 92.18(3)°, γ = 90°, Z = 4. Details of the synthesis and structural characterization and X-ray crystal structure determination of the title compounds are presented. Index Abstract Synthesis, Separation and Crystal Structures of E and Z Isomers of 3-(2,5-Dimethoxyphenyl)-2-(4-Methoxyphenyl)Acrylic Acid Balachandra Chenna, Bidhan A. Shinkre, Shweta Patel, Samuel B. Owens Jr., Gary M. Gray, Sadanandan E. Velu* Separation of E and Z isomers of 3-(2,5-dimethoxyphenyl)-2-(4-methoxyphenyl)acrylic acid from a 1:1 mixture has been carried out by selective acidification of their sodium salts and the structures of the individual isomers have been determined by X-ray single crystal diffraction.      

Poly(3,4‐ethylenedioxythiophene) (PEDOT)‐Coated MWCNTs Tethered to Conducting Substrates: Facile Electrochemistry and Enhanced Coloring Efficiency

Composite films of poly(3,4‐ethylenedioxythiophene) (PEDOT)‐coated over functionalized multiwalled coiled and linear carbon nanotubes (CNTs) have been fabricated by a simple oxidative electropolymerization route. The nanotubular morphology of the polymer–CNT composite is responsible for the lower charge transfer impedance, lower internal resistance, and superior capacitive response in comparison to that shown by the control PEDOT film doped by trifluoromethanesulfonate ions. This facile electrochemistry exhibited by the PEDOT–CNT composite film ensues in a remarkably high coloration efficiency of 367 cm² · C⁻¹ at 550 nm, hitherto unrealized for PEDOT; thus demonstrating the huge potential the PEDOT–CNT composite film has as cathode for the entire spectrum of electrochromic devices.

     

Alkali Metal–Promoted Facile Synthesis of Secondary Amines from Imines and Carbodiimides

We present here an efficient method for the hydroboration of aldimines (-C=N-) with pinacolborane (HBpin) using an alkali metal catalyst, potassium benzyl. The reaction was accomplished with unprecedented catalytic efficiency under mild and solvent-free conditions to afford the high yield of the corresponding N-boryl amines up to 97%. Various functionalities on aldimines were incorporated for hydroboration. The corresponding boryl amines were subjected to further hydrolysis to yield the corresponding secondary amines with good yields up to 89%. This protocol for the reaction demonstrates an atom-economic and green method with diverse imines that bears excellent functional group tolerance. Chemoselective reduction of imines was also attained, with good yields of 74–89%. We also propose the most plausible mechanism involving the formation of metal hydride as the active pre-catalyst.     

Electronic and ligating properties of carbocyclic carbenes: A theoretical investigation

Carbocyclic carbenes (CCCs) are a class of nucleophilic carbenes which are very similar to N-heterocyclic carbenes (NHCs) in terms of their reactivity, but they do not contain a stabilizing heteroatom in their cyclic ring system. In this study, 17 representative known CCCs and 34 newly designed CCCs are evaluated using quantum chemical methods, and the results are compared in terms of their stability, nucleophilicity, and proton affinity (PA) parameters. The results are divided on the basis of ring size of the known and reported CCCs. The stability, nucleophilicity, PA, complexation energy, and bond strength–related parameters were estimated using M06/6-311++G(d,p) method. The results indicated that the CCCs known in the literature are strong σ-electron donating species and have considerable π-accepting properties. This study led to the design and identification of a few new CCCs with dimethylamine and diaminomethynyl substituents which can be singlet stable and are substantially nucleophilic. © 2018 Wiley Periodicals, Inc.     

Comparative Analysis of Double Gate Junction Less (DG JL) and Gate Stacked Double Gate Junction Less (GS DG JL) MOSFETs

Semiconductors - The quest for downscaling of devices has led to novel configurations with better performance parameters of which Junction Less (JL) MOSFET is an important configuration regarding...     

Spectrophotometric simultaneous determination of rabeprazole sodium and itopride hydrochloride in capsule dosage form

A new simple, economical, rapid, precise and accurate method for simultaneous determination of rabeprazole sodium and itopride hydrochloride in capsule dosage form has been developed. The method is based on ratio spectra derivative spectrophotometry. The amplitudes in the first derivative of the corresponding ratio spectra at 231nm (minima) and 260nm were selected to determine rabeprazole sodium and itopride hydrochloride, respectively. The method was validated with respect to linearity, precision and accuracy.     

Simultaneous HPTLC Determination of Escitalopram Oxalate and Clonazepam in Combined Tablets

A new, simple high-performance thin-layer chromatographic method has been established and validated for simultaneous determination of escitalopram oxalate and clonazepam in a combined tablet dosage form. The drugs were separated on aluminum plates precoated with silica gel 60 F₂₅₄; toluene–ethyl acetate–triethylamine 7:3.5:3 (v/v) was used as mobile phase. Quantitative analysis was performed by densitometric scanning at 258 nm. The method was validated for linearity, accuracy, precision, and robustness. The calibration plot was linear over the ranges 250–2,500 and 50–500 ng band⁻¹ for escitalopram oxalate and clonazepam, respectively. The method was successfully applied to the analysis of drugs in a pharmaceutical formulation.     

Dielectric relaxation and ac conduction in multiferroic Bi0.8Gd0.1Pb0.1Fe0.9Ti0.1O3 ceramics: impedance spectroscopy analysis

ABSTRACT

The solid solutions of Bi_0.8Gd_0.1Pb_0.1Fe_0.9Ti_0.1O₃ have been prepared by the solid-state reaction method. The preliminary structural studies were carried out by X-ray diffraction technique showing the formation of polycrystalline sample with ABO₃ type of perovskite structure with hexagonal symmetry for the Bi_0.8Gd_0.1Pb_0.1Fe_0.9Ti_0.1O₃ ceramic system at room temperature. Dielectric properties and impedance study of this ceramic have been characterized in the temperature range room temperature to 375 °C and frequency range 100 Hz–1 MHz. The maximum ferroelectric transition temperature (T_c) of this system was in the range 200 °C–260 °C with the dielectric constant of peak to be ～30,170 at 1 kHz. The complex impedance plot exhibited one impedance semicircle observed at low temperature, whereas two semicircles above 80 °C and the centres of the semicircles lie below the real axis, which indicates that the material is non-Debye type. Single semicircle is explained by the grain effect of the bulk and double semicircle is due to the bulk and grain boundary effect. The bulk resistance and grain boundary resistance of the materials decrease with the increasing temperature, showing negative temperature and a typical semiconducting property, i.e. negative temperature coefficient of resistance behaviour.     

Behavior of acetyl modified amino acids in reverse micelles: a non-invasive and physiochemical approach

The well-characterized, monodisperse nature of reverse micelles formed by sodium bis-(2-ethylhexyl)sulfosuccinate/water/isooctane and their usefulness in assimilating compounds of varied interests have been exploited to investigate the effect of acetyl modified amino acids (MAA) viz., N-acetyl-L-glycine (NAG), N-acetyl-L-aspartic acid (NAA) and N-acetyl-L-cysteine (NAC), on the water pool and physiochemical properties. Non-invasive techniques such as FTIR and UV-vis absorption spectroscopy have been employed to analyze the interactions of MAA with core water and the AOT headgroup. The micropolarities on both sides of AOT interface have further been investigated by UV-vis absorption probes, methyl orange (MO) and methylene blue (MB). The dynamics of water and temperature induced percolation process have also been studied. The MAA molecules have been found to assist the process with the increase in water content where as a contrary behavior has been observed with the increase in temperature. Conductivity results have been further rationalized in terms of scaling equations, which delineate the dynamic nature of the percolation process. The results have also been analyzed in the light of activation energy of the percolation process and thermodynamics of droplet clustering.     

Analytical framework of small-gap photoconductive dipole antenna using equivalent circuit model

A compact planar antenna sources with on-chip fabrication and high directivity in order to achieve large depth-of-field for better image resolution is the prospective demand for THz imaging application. Therefore, the small-gap photoconductive dipole antennas have been explored to fulfil such applications demand. However, there are certain modalities for improving the photoconductive dipole antenna performance which need to identify to accomplish high THz average radiated power and improved total efficiency. The unit-cell small-gap photoconductive dipole antenna radiation power enhancement methods need to optimize the design parameters with photoconductive material selection from theoretical simulation. Further, the potential improvement of coupling efficiency of THz wave with air as well as femto-second laser incident efficiency is also important parameters to enhance the radiation power of small-gap photoconductive dipole antenna. In this paper, we have presented an analytical procedure employing explicit mathematical expression leading to the physical behaviour of small-gap photoconductive dipole antenna. The effects of biased lines on the antenna performance parameters are discussed with the help of proposed equivalent circuit model. We have explored the effect of gap-size on the THz radiated power and on total radiation efficiency from the proposed photoconductive dipole antennas.