Photometric determination of palladium with chrome azurol S

Summary Chrome Azurol S permits a simple colorimetric determination of palladium with a sensitivity of 0.4g/cm² (practical) or 0.04g/cm² (Sandell), respectively. Conditions and interferences are described in detail.

---

Zusammenfassung Palladium läßt sich mit Hilfe von Chromazurol S auf einfache Weise kolorimetrisch bestimmen. Die praktische Empfindlichkeit der Methode beträgt 0,4g/cm² bzw. 0,04g/cm² nachSandell. Die Arbeitsbedingungen und die durch Fremdionen verursachten Störungen werden angegeben.

---

Résumé Le chromazurol S permet un dosage colorimétrique simple du palladium, avec une sensibilité de 0,4g/cm² (en pratique) ou 0,04g/cm² (Sandell) respectivement. On décrit en détail les conditions opératoires et les interférences.

     

Pulse-radiolysis studies on 4-pyridinemethanol and 4-pyridinecarboxaldehyde in aqueous solutions: dimer radical anion formation in the case of 4-pyridinecarboxaldehyde

Reactions of e _aq ^– , H atom and OH radicals with 4-pyridinemethanol (4-PM) and 4-pyridinecarboxaldehyde (4-PCA) have been studied at various pH values using the pulse radiolysis technique. Reaction of e _aq ^– with 4-PM and 4-PCA leads to the formation of pyridinyl and ketyl radicals of 4-PM and 4-PCA, respectively. Ketyl radicals formed from 4-PCA react with the parent molecule to give a dimeric radical species. At pH 7, the equilibrium constant for the dimer formation was determined to be 13 500 M^-1. At pH 13 also dimer radical formation was observed. Reaction of e _aq ^– with 4-PM was found to give highly reducing pyridinyl radicals. Reaction of OH radicals with 4-PM gives a mixture of species,viz., OH adducts and radicals formed by H-atom abstraction from the –CH₂OH moiety. Radicals formed by H-atom abstraction reaction from 4-PM were found to be reducing in nature. O^– radicals were found to react with 4-PM exclusively by H-abstraction pathway.     

A novel nitrate-selective electrode based on precipitated nitron nitrate

Summary A nitrate-selective electrode based on precipitated nitron nitrate in an epoxy resin matrix has been prepared. The lower detection limit is 10^–5 M, the optimum pH range is 2.0–8.5, and the response time is 1 min. The electrode is selective in presence of CH₃COO^–, SO₄ ^2–, C₂O₄ ^2–, PO₄ ^3–, NO₂ ^–, Cl^– and Br^–, but I^– interferes. Results for nitrate in soil samples were in agreement with values obtained spectrophotometrically.

---

Eine neue nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats

Zusammenfassung Eine nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats in einer Epoxyharz-Matrix wurde hergestellt. Die untere Nachweisgrenze ist 10^–5 M, das pH-Optimum liegt zwischen 2,0 und 8,5, die Reaktionszeit beträgt 1 Minute. Die Elektrode ist selektiv in Gegenwart von Acetat, Sulfat, Oxalat, Phosphat, Nitrit, Chlorid und Bromid; aber Jodid stört. Ergebnisse der Nitratbestimmung in Bodenproben stimmen mit spektrophotometrischen Resultaten überein.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Study of formation of nano-quasicrystals and crystallization kinetics of Zr-Al-Ni-Cu metallic glass

The formation of nano-quasicrystals on isothermal annealing of melt-spun ribbons of Zr_69.5Al_7.5Ni₁₁Cu₁₂ metallic glass has been investigated using transmission electron microscopy (TEM). The crystallization study of this metallic glass has been carried out using differential scanning calorimetry (DSC) in non-isothermal (linear heating) mode. It exhibits two-stage crystallization where the first stage corresponds to the precipitation of icosohedral nano-quasicrystalline phase. This has been confirmed with the help of TEM investigations. The crystallization parameters like the activation energy (E _c) and frequency factor (k ₀) have been derived using the Kissinger peak shift analysis. The activation energies for the first and second crystallization peak are found to be 278 and 295 kJ mol^–1, respectively. The frequency factors obtained for the two peaks are respectively 7.16·10¹⁹ and 1.42·10²⁰ s^–1. E _c, k ₀ and the Avrami exponent (n) have also been derived by fitting the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation for the transformed volume fraction (x) to the crystallization data. JMAK results of E _c for the first and second crystallization peak turn out to be 270 and 290 kJ mol^–1 respectively. However, k ₀ and n are found to be heating rate dependent as reported in similar studies. The values of n for the first crystallization stage ranges between 1.66 and 2.57 indicating diffusion-controlled transformation in agreement with earlier reports.     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.     

Anion-pi interactions in cyanuric acids: a combined crystallographic and computational study

Several structures of pi complexes of isocyanuric acid and of several thio derivatives with anions have been computed by using high level ab initio calculations. The nature of the complexes has been studied by means of the method of molecular interaction potential with polarization (MIPp) and Bader's theory of atoms-in-molecules. These molecules form favorable complexes with anions and can be used as binding units for building receptors for the molecular recognition of anions. In several cases, the anion-pi interaction has been demonstrated experimentally by means of X-ray crystallography.     

Laser-induced electron impact ionization in a reflectron time-of-flight mass spectrometer

Some details of the generation of electrons by impinging a laser beam on a metal surface are described. It is shown that highly efficient electron generation is observed only during the laser pulse. Therefore, this technique delivers intense pulses of electrons. The process is investigated and different ion source set-ups are discussed. In conjunction with a time-of-flight mass spectrometer this technique can be used to produce mass spectra of different samples ranging from simple organic molecules to peptides.     

Simplified synthesis, H, C, N, Sn NMR spectra and X-ray structures of diorganotin(IV) complexes containing the 4-phenyl-2,4-butanedionebenzoylhydrazone(2−) ligand

Two diorganotin(IV) complexes of the general formula R₂Sn[Ph(O)CCH-C(Me)N-NC(O)Ph] (R=Ph, 1; R=Me, 2) have been synthesised from the corresponding diorganotin(IV) dichloride and the ligand 4-phenyl-2,4-butanedionebenzoylhydrazone(2−) (H₂L), derived from benzoyl acetone and benzoyl hydrazide in methanol at room temperature in presence of triethylamine. The syntheses were performed under very mild conditions, at room temperature and without exclusion of air or moisture from the reaction vessel. Previously, rigorous conditions have been considered necessary for these species. The two compounds have been characterised by elemental analysis, IR and ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn NMR spectra, and their structures have been confirmed single crystal X-ray structure analysis. The central tin atom of both complexes adopts a distorted trigonal bipyramidal coordination with two ligand oxygen atoms in axial positions, the nitrogen atom of the ligand and two organic groups on tin occupying equatorial sites. 2 has crystallised with two crystallographically independent molecules in the asymmetric unit. The δ(¹¹⁹Sn) values for the complexes 1 and 2 are −151.5 and −146.8 ppm, respectively, thus indicating penta-coordinated tin centres.     

Identification of Amino Acids with Modified Ninhydrin Reagents on Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - The four new spray reagents (Benzoic acid and some of its parahaloderivatives) have been introduced. These reagents enable...     

Mixed Polymer‐Coated Magnetic Nanoparticles as Forward Osmosis Draw Agents of Tuned Hydrophilicity

We recently reported a polymer‐coated magnetic nanoparticle (MNP) draw agent for the forward osmosis (FO) water desalination process. The water flux was found to increase when the polymer poly(sodium acrylate) (PSA) was anchored to the MNP surface as compared to the polymer (or polyelectrolyte solution) alone, due to the polymer chains being stretched out and most of the hydrophilic groups on the polymer contributing to water flux. We herein report the use of a secondary polymer poly(N‐isopropylacrylamide) PNIPAM to manipulate the PSA polymer conformation and influence inter‐ and intrachain interactions to enhance the efficiency of the FO draw agent. These PSA–PNIPAM‐coated MNPs generated a much higher water flux of ～11.66 LMH when compared to the 100 % PSA‐coated MNPs featuring a value of ～5.32 LMH under identical FO conditions. The osmotic pressure and water flux driven by the mixed polymer‐coated MNPs were found to be a strong function of the net polymer coverage on MNPs, that is, net available hydrophilic groups. Our new draw agent demonstrates potential for use in the water industry due to its improved efficiency and cost effectiveness as it uses only ～0.062 % (w/v) of the draw agent solution.