Pr(0.5):ZBLAN的双频激发上转换发光的研究

报道了Pr(0.5):ZBLAN玻璃在双频双光束光源激发下的激发态上转换现象.发现上转换发射谱的荧光与常规荧光发射谱的荧光一致，还发现双频激发下的上转换激发谱有3个明显的谱峰，它们依此对应于788.5nm 1G4→3P2,850.5nm 1G4→1I6和805.0nm 3H6→1D2的激发态吸收跃迁，而大的850.5nm上转换激发谱峰是由大的1G4(Pr3+ )→1I6(Pr3+)跃迁的振子强度f=23.04×10-6所致.这说明起源于1G4能级的激发态吸收上转换尤其1G4(Pr3+)→1I6(Pr3+)     

国家关键技术管理计算机系统研究

本文根据国家关键技术管理工作的特点，本着提高决策质量，满足用户要求的原则，分析和设计国家关键技术管理计算机系统，为高层次宏观决策提供丰富的信息支持。     

Analysis of far-infrared laser magnetic resonance spectra of CH2Br at 447.3 and 671.1μm

A simple model has been developed to describe the Zeeman patterns of far-infrared laser magnetic resonance spectra of the monobromomethyl radical CH₂Br observed at 447.3 and 671.1μm. A satisfactory agreement between the experimental spectra of the radical and their simulation with this simple model has been achieved. This approach can be used to gain further information about the structure and the spectrum of this interesting radical.     

类铜离子的电子碰撞参数及其规律

用准相对论扭曲波方法系统地计算了Ｂａ、Ｎｄ、Ｇｄ、Ｙｂ、Ａｕ、Ｐｂ类铜离子组态能级之间的电子碰撞激发强度Ω（ｎｌ－ｎｌ），３≤ｎ≤７，４≤ｎ≤７，同时给出了高能极限的碰撞强度和外推到阈值的碰撞强度，用最小二乘样条方法拟合了全能域碰撞强度及热平均速率系数。对于一个激发过程，用１０个参数可以得到碰撞电子在任意能量下的碰撞强度以及任意温度下的速率系数。     

线状锗等离子体X射线线谱的时间分辨测量

用自行研制的X射线条纹晶体谱仪首次测量了线状锗等离子体的X射线时间分辨谱。给出了类Ne-锗L线共振线的时间演化过程,并用类Ne-锗L线共振线与其双电子俘获伴线的相对强度比粗估了锗等离子体的电子温度及其随时间的变化,实验给出了X光激光增益区介质的电子温度为400～760eV,同时给出了电子温度保持相对恒定的时间不小于90ps(电子温度变化小于2％)。     

在可交换四元数空间中的双曲方程的特征边值问题

讨论了一阶和二阶双曲复方程的特征边值问题.对其中两种线性方程,分别在不同的情况下获得通解和可解条件.而对于拟线性的二阶双曲复方程,证明了解的存在性和唯一性.     

Adhesion measurement of thin films by a modified laser spallation technique: theoretical analysis and experimental investigation

Laser driven shocks can lead to a dynamic failure, called film spallation. Here, we use a modified laser spallation set-up to measure the dynamic adhesion of thin films and we propose a novel diagnostic technology. Based on correlation theory, new spallation criteria for characterizing the progressive damage at the interface between the film and the substrate are established, such as interface delamination, film spallation and film expulsion. With the help of the theory, the degree of damage and the dimension of damage (i.e. fracture), such as the minimum width of delamination radius, the thickness of the film etc., are estimated. Experiments are carried out on epoxy/stainless steel and epoxy/Al, and the experimental results show that their dynamic bonding strengths are about 25 MPa and 20 MPa, respectively. The detailed results, analyses and discussions are presented in this paper. Received: 6 February 2001 / Accepted: 3 December 2001 / Published online: 11 February 2002     

ICP-AES测定饮用水源中的Cu、Mn、Pb、Cd、Zn

用ICP－AES法同时测定饮用水源中的Cu、Mn、Pb、Cd、Zn等重金属元素，具有基体效应小、测量范围宽等优点。检出限为0．2－4．0μg/L，回收率为91．5％－103．9％，相对标准偏差为0．29％－1．5％，测定密码样与实际样品，结果令人满意。     

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Chitosan/magnetite nanocomposite was synthesized induced by magnetic field via in situ hybridization in ambient condition. Results of XRD patterns and TEM micrographs indicated that magnetite particles with 10–20 nm were dispersed in chitosan homogeneously. An interesting result is that magnetite nanoparticles were assembled to form chain-like structures under the influence of the external magnetic field, which mimics the magnetite chains inside of magnetotatic bacteria. The saturated magnetization (Ms) of nano-magnetite in chitosan was 50.54 emu/g, which is as high as 54% of bulk magnetite. The remanence (Mr) and coercivity (Hc) were 4 emu/g and14.8 Oe, respectively, which indicated that magnetite nanoparticles were superparamagnetic. The key of route is that a pre-precipitated chitosan hydrogel membrane, used as chemical reactor, which controlled the precipitation of chitosan precipitation and in situ transformation of magnetite from the precursor simultaneously in the magnetic field environment.     

Molecular dynamics simulation of thermodynamic properties of NaCl at high pressures and temperatures

The expansivity, constant-pressure heat capacity, and isothermal bulk modulus of sodium chloride (NaCl) have been obtained by using molecular dynamics method. The calculated thermodynamic parameters are found to be in agreement with the available experimental data. At an extended temperature and pressure ranges, these parameters have also been predicted. The thermodynamic properties of NaCl are summarized in the pressure 0-500 kbar ranges and the temperature up to 1000 K.