Separation and determination of seven fluoroquinolones by pressurized capillary electrochromatography

In this paper, pressurized CEC was used for the separation and determination of seven fluoroquinolones (FQs). The effect of different experimental conditions, such as the concentration and pH of the buffer, the organic modifier concentration, the surfactant and ion-paring agents added to the electrolyte, and applied voltage were studied. All the seven FQs were baseline separated using mobile phase containing 27% v/v ACN, 5 mmol/L Na2HPO4 buffer (pH 4.0 adjusted using citric acid), 11 mmol/L SDS, and 0.01% TEA v/v at detection wavelength of 287 nm and at an applied voltage of -10 kV. The calibration curves were linear (r>0.9991) over a concentration range of 1.0-50.0 mg/L for norfloxacin (NFLX); 2.5-50.0 mg/L for fleroxacin (FLX), ciprofloxacin (CPFX), and lomefloxacin (LMX); and 5.0-50.0 mg/L for enoxacin (ENX), ofloxacin (OFLX), and gatifloxacin (GFLX). The detection limits (S/N = 3) for ENX, OFLX, FLX, NFLX, CPFX, LMX, and GFLX were 0.5, 0.8, 0.4, 0.2, 0.4, 0.5, and 1.0 mg/L, respectively. The method is simple, rapid, and reproducible. It was successfully applied to the analysis of fish muscle samples spiked with FQs. Mean recoveries ranged from 81.6 to 97.6%.     

苯并氮杂冠醚化合物在氘代氯仿中的溶剂效应的动态1H NMR研究

本文讨论了样品浓度对苯并氮杂冠醚化合物-氘代氯仿溶液~1H NMR镨及~1H纵向弛豫时间的影响(稀释位移效应)。在实验基础上提出了苯并氮杂冠醚化合物在氯仿中的叔胺-叔铵盐交换作用机制。以此馐土讼∈臀灰菩в? 并得到巳止诿鸦衔锎邮灏返绞屣а蔚姆从ζ胶獬Ｊ齂_2和交换速率常数k, 另外, 本文还讨论了冠醚环中氮原子上取代基对稀释位移效应的影响,     

TEOS-MTES基SiO2溶胶微结构的SAXS研究

正硅酸乙酯(TEOS)为前驱体,在碱性条件下制备含有无定形SiO2颗粒的溶胶,以甲基三乙氧基硅烷(MTES)在酸性条件下获得聚甲基硅氧链,二者混合后应用同步辐射X射线进行混合溶胶的SAXS散射强度测定,计算了溶胶的平均回转半径、平均粒径、两相界面层厚度、散射体体积分数、两相间比表面积等参数,辅以光子相关光谱法(PCS)和透射电子显微镜(TEM)观测溶胶粒度,证实SiO2颗粒被MTES混合物连接成族团.实验发现所测混合溶胶样品均表现出对Porod定理的负偏离,说明溶胶中颗粒与溶剂之间存在很明显的两相间界面层.     

Application of tryptamine as a derivatizing agent for the determination of airborne isocyanates. Part 5. Investigation of tryptamine-coated XAD-2 personal sampler for airborne isocyanates in workplaces.

The development of an efficient solid sorbent personal sampler with increased convenience for sample collection in workplaces is described. Several solid sorbents were coated with tryptamine, and sampling tubes were prepared with the coated sorbents. These tubes were evaluated for the collection of phenyl isocyanate vapour generated in a commercial test atmosphere generation system that permits the simultaneous collection of up to 12 uniformly loaded samples. Tryptamine-coated XAD-2 resin was shown to be the most efficient solid sorbent for the collection of airborne phenyl isocyanate. The optimum amount of tryptamine needed for coating XAD-2 resin was investigated.     

A new platinum-osmium alkyne complex from the reaction of Pt2Os4(CO)18 with PhC ≡ CPh: The synthesis,characterization, and crystal structure of Pt2Os4(CO)8 (μ3-PhC2Ph)3(μ4-PhC2Ph)

The new platinum-osmium alkyne cluster complex Pt₂Os₄(CO)₈(₃-PhC₂Ph)₃ ( ₄-PhC₂Ph),2, was obtained from the reaction of Pt₂Os₄(CO)₁₈,1b, with PhC₂Ph and was characterized by IR.¹H NMR and single-crystal X-ray diffraction analyses. The cluster of compound2 consists of an osmium capped Pt₂Os₃ square pyramid. It aLso contains three triply bridging and one quadruply bridging diphenylacetylene ligands. Crystal data for2: space group PI,a = 12.530(2) Å,b = 21.565(4) Å,c = 11.284(2) Å, = 100.31(2), = 111.89(1), = 76.78(2),Z = 2, 3879 reflections,R = 0.032.     

Molecular clips form isostructural dimeric aggregates from benzene to water

We report the synthesis and characterization of eight C-shaped methylene-bridged glycoluril dimers (1-8) bearing hydrogen-bonding amide groups on their aromatic rings. Compounds 1-6 undergo tight dimerization in CDCl3 solution (Ks > 9 x 10(5) M(-1)); binary mixtures of 1-7 form mixtures of homodimers and heterodimers in moderately selective dimerization processes (0.23 < or = Keq < or = 768; 0.253 < or = chiAB < 0.933). The high affinity formation of 1.1-6.6 is due to the commensurate nature of the geometrical constraints imposed by the pi-pi interactions and only two hydrogen bonds. The differential response of the strengths of the pi-pi interactions and H-bonds of 2.2 to changes in solvent polarity--from C6D6 to D2O--results in the formation of a solvent-independent isostructural aggregate that exhibits high affinity dimerization across the full range of solvents.     

An efficient procedure for protection of carbonyls in Brønsted acidic ionic liquid [Hmim]BF4

Protection of carbonyls as acetals or ketals using Brønsted acidic ionic liquid [Hmim]BF₄ as catalyst as well as solvent was investigated. Satisfactory results were obtained for the protection of carbonyls as cycloacetals or ketals with diols. The product can be separated conveniently from the reaction system, and the ionic liquid can be reused after removal of water.     

1,2,4-benzothiadiazine 1,1-dioxides 3. Reactions of 2-aminobenzenesulfonamide with chloroalkyl isocyanates

Reactions of 2-aminobenzenesulfonamide ( 1 ) with allyl, methyl, 2-chloroethyl aor 3-chloropropyl isocyanates gave 2-(methylureido)-, 2-(allylureido)-, 2-(2′-chloroethylureido)- and 2-(3′-chloropropylureido)-benzene sulfonamides 3a,b and 7a,b in excellent yields. Treatment of 3a,b at refluxing temperature of DMF afforded 2H-1,2,4-benzothiadiazin-3(4H)-one 1,1-dioxide ( 4 ) in good yield. However, when compounds 7a,b were refluxed in 2-propanol, 3-(2′-aminoethoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 11a ) and 3-(3′-aminopropoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 11b ) were obtained in a form of the hydrochloride salts 10a,b in 87% and 78% yields respectively. Heating 11b in ethanol gave a dimeric form of 2H-1,2,4-benzothiadiazin-3(4H)-one 1,1-dioxide and 3-(3′-aminopropoxy)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 12 ) in 55% yield. Treating of 7a,b or 11a,b with triethylamine at the refluxing temperature of 2-propanol afforded 3-(2′-hydroxyethylamino)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 2a ) and 3-(3′-hydroxypropylamine)-2H-1,2,4-benzothiadiazine 1,1-dioxide ( 2b ) via a Smiles rearrangement.     

Thermokinetic Studies of the Process for Electrorefining Silver

In this work some calorimetric measurements were also carried out on the electrorefining silver by using different current densities with a Calvet type microcalorimeter at room temperature. The ratio (R) of the measured heat (