Electron beam treatment of lignite-burning flue gas with high concentrations of sulfur dioxide and water

Experiments were carried out to investigate the removals of SO₂ and NO_x from simulated lignite-burning flue gas containing SO₂ (4800 ppm), NO (320 ppm) and H₂O (22%) by electron beam irradiation. Removal efficiencies of SO₂ and NO_x were achieved to reach 97 and 88% at 70°C, and 74 and 85% at 80°C, respectively, with the dose of 10.3 kGy without NH₃ leakage. The higher removal efficiencies of SO₂ and NO_x were observed in simulated lignite-burning flue gas than in coal-fired flue gas containing 800 ppm of SO₂, 225 ppm of NO and 7.5% H₂O at the same treatment condition. The higher removal efficiencies were attributed to the higher concentrations of SO₂, H₂O, and added NH₃. Simulation calculations indicated that the higher concentrations of these components enhance the effective radical reactions to oxidize NO to form NO₂ with HO₂ radical, and to oxidize SO₂ to form SO₃ with OH radical and O₂. The reactions of NO_x with N and NH₂ radicals to produce N₂ and N₂O also promote the NO_x removal. By-product was determined to be the mixture of (NH₄)₂SO₄ and NH₄NO₃ containing a small amount of H₂SO₄.     

Direct nanocomposite of crystalline TiO2 particles and mesoporous silica as a molecular selective and highly active photocatalyst

Well-crystallised TiO2 particles (P-25, 20-30 nm in diameter) were directly incorporated into surfactant-templated mesoporous silica particles (pore diameter: 2.7 nm), and the composite material with a high TiO2 content (60 wt%) showed molecular selective and enhanced photocatalysis for decomposition of 4-nonylphenol.     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

A low-cost method for determination of calcium carbonate in cement by membraneless vaporization with capacitively coupled contactless conductivity detection

This work presents a flow analysis method for direct quantitation of calcium carbonate in cement without pretreatment of the sample. The method is based on online vaporization of CO₂ gas following acidification of the sample inside a small chamber that has a flow of acceptor solution passing around it. Solubilization of the CO₂ gas into the acceptor stream changes the conductivity of the acceptor solution causing an increase of signal at the capacitively coupled contactless conductivity detection (C⁴D) placed at the outlet of the vaporization chamber. This chamber is an adaption from previous work reported on ‘membraneless vaporization’ (MBL-VP).The method can be used in the quality control of production of mixed cement. These cement materials usually have calcium carbonate contents at high concentration range (e.g., 33-99% (w/w) CaCO₃). Analysis of samples by this method is direct and convenient as it requires no sample pretreatment. The method is low-cost with satisfactory accuracy and acceptable precision.     

Synthesis of 5-heteroarylazulenes: first selective electrophilic substitution at the 5-position of azulene

1,3-Di-tert-butylazulene reacted with highly electrophilic trifluoromethanesulfonate of N-containing heterocycles to give 5-(dihydroheteroaryl)azulene derivatives in good yield and treatment of the 5-(dihydroheteroaryl)azulene derivatives with KOH afforded 5-(heteroaryl)azulenes in excellent yield.