Improvements of physical and mechanical properties of electron beam irradiation—crosslinked EVA foams

In this work, ethylene–vinyl acetate (EVA) copolymer foams were prepared and crosslinked by using high‐energy electron beam (e‐beam) radiation (10 MeV). The effect of parameters such as irradiation dose, the contents of foaming agent, radiation activator, and radiation sensitizer on improvement of physical and mechanical properties of the EVA foamed samples were investigated. The foams were obtained through a four‐step process of melt mixing, forming, crosslinking, and foaming. During the melt mixing process EVA was compounded with different amounts of azodicarbonamide (ADCA) as a blowing agent, zinc oxide (ZnO) as a radiation activator, and trimethylol propane‐trimethacrylate (TMPTMA) as a radiation sensitizer. The samples were compression molded into flat sheets at low temperature (110°C) and were then radiation‐crosslinked by 20–80 kGy e‐beam. Finally, the crosslinked samples were converted to foams by a high temperature (210°C) compression molding process. The foamed samples were analyzed in terms of gel content, density, compression molding set, tensile properties, and micro‐structural features. It was found that an increase in absorbed radiation dosage increases crosslink density, elasticity, percentage recovery, tensile strength, and compression properties of the EVA foams. Due to the increased recovery the percentage of compression set was reduced. Similarly increasing the TMPTMA content in the formulation increased the crosslink density and the resulting mechanical properties. Contrary to these findings, addition of ADCA led to the formation of extra gases which in turn reduced the crosslink density, and resulted in the deterioration of the mechanical properties and hence an increase in the compression set. However, addition of ZnO and TMPTMA led to the formation of smaller and more uniform cell size with improved mechanical properties. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and characterization of a silica‐based magnetic nanocomposite and its application as a recoverable catalyst for the one‐pot multicomponent synthesis of quinazolinone derivatives

An environmentally benign magnetic silica‐based nanocomposite (Fe₃O₄/SBA‐15) as a heterogeneous nanocatalyst was prepared and characterized using Fourier transform infrared and ultraviolet–visible diffuse reflectance spectroscopies, scanning electron microscopy, X‐ray diffraction, vibrating sample magnetometry and Brunauer–Emmett–Teller multilayer nitrogen adsorption. Its catalytic activity was investigated for the one‐pot multicomponent synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones starting from isatoic anhydride, ammonium acetate and various aldehydes under mild reaction conditions and easy work‐up procedure in refluxing ethanol with good yields. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

烯烃及α,β-不饱和醛、酮在气相中的无催化环氧化反应

概述了碳碳双键在气相中无催化环氧化反应研究方法、反应机理、测定了2－甲基丙烯醛与过氧化乙酰基在393K和413K时环氧化反应的速率,实验结果表明，不同结构烯烃的环氧化反应速率主要取决于双键所连取代基的性质，取代基的给电子能力越强环氧化反应速率越快。     

Liquid/solid interface of ultrathin ionic liquid films: [C1C1Im][Tf2N] and [C8C1Im][Tf2N] on Au(111)

Ultrathin films of two imidazolium-based ionic liquids (IL), [C(1)C(1)Im][Tf(2)N] (= 1,3-dimethylimidazolium bis(trifluoromethyl)imide) and [C(8)C(1)Im][Tf(2)N] (= 1-methyl-3-octylimidazolium bis(trifluoromethyl)imide) were prepared on a Au(111) single-crystal surface by physical vapor deposition in ultrahigh vacuum. The adsorption behavior, orientation, and growth were monitored via angle-resolved X-ray photoelectron spectroscopy (ARXPS). Coverage-dependent chemical shifts of the IL-derived core levels indicate that for both ILs the first layer is formed from anions and cations directly in contact with the Au surface in a checkerboard arrangement and that for [C(8)C(1)Im][Tf(2)N] a reorientation of the alkyl chain with increasing coverage is found. For both ILs, geometry models of the first adsorption layer are proposed. For higher coverages, both ILs grow in a layer-by-layer fashion up to thicknesses of at least 9 nm (>10 ML). Moreover, beam damage effects are discussed, which are mainly related to the decomposition of [Tf(2)N](-) anions directly adsorbed at the gold surface.     

Influence of photostabilizers on wood flour-HDPE composites exposed to xenon-arc radiation with and without water spray

The weathering of wood-plastic composites changes their appearance and/or mechanical properties. These changes can be slowed through the addition of ultraviolet absorbers and pigments. The first phase of this study examined the effect of incorporating different concentrations of an ultraviolet absorber and/or pigment into wood-flour-filled high-density polyethylene (WF/HDPE) composites. Lightness and flexural properties of the composites were determined periodically during exposure to UV radiation and water spray in a xenon-arc type weathering apparatus. The influence of exposure type (UV radiation, with or without water spray) on the properties of photostabilized WF/HDPE composites was determined in the second phase of the study. The results showed that both ultraviolet absorbers and pigments provide protection against weathering of wood-plastic composites. The amount of protection can be influenced by both photostabilzer concentration and exposure variables.     

Genomic Encryption of Digital Data Stored in Synthetic DNA

Today, we can read human genomes and store digital data robustly in synthetic DNA. Herein, we report a strategy to intertwine these two technologies to enable the secure storage of valuable information in synthetic DNA, protected with personalized keys. We show that genetic short tandem repeats (STRs) contain sufficient entropy to generate strong encryption keys, and that only one technology, DNA sequencing, is required to simultaneously read the key and the data. Using this approach, we experimentally generated 80 bit strong keys from human DNA, and used such a key to encrypt 17 kB of digital information stored in synthetic DNA. Finally, the decrypted information was recovered perfectly from a single massively parallel sequencing run.     

SYNTHESIS,REACTIVITY AND CONFORMATION OF 10,11-DIHYDRODIBENZO-[b,f]PHOSPHEPIN AND DIBENZO[b,f]PHOSPHEPIN DERIVATIVES. PHOSPHORUS ANALOGUES OF IMINOBIBENZYL ANTIDEPRESSANTS

Abstract

Derivatives of the novel dibenzo[b,f]phosphepin system are prepared from 10,11-dihydro-5-phenyl-5H-bibenzo[b,f]phosphepin 5-oxide (2). New members in the 10,11-dihydro-5H-dibenzo[b,f]phosphepin series, including phosphorus analogues (7, 10) of the andidepressant drug imipramine (30), are also reported. Products of nucleophilic substitution at tetrahedral phosphorus in 2 appear to be determined by the relative apicophilicity of the nucleophile. Conformational analysis based on ¹H NMR data suggests folded (“butterfly”) conformation for the tricyclic compounds. The twisted boat conformation of the central ring in the 10,11-dihydro compounds bears a pseudo-equatorial P[dbnd]O oxygen or a P[dbnd]S sulfur, in solution. Symmetric AA‘BB’ spin systems are found in 4,5 and 7, and their solution conformations appear to be similar to those of analogous 10,11-dihydrodibenzo[b,f]azepine derivatives. The interaction of some compounds with NMR shift reagents and their mass spectral fragmentations are discussed.     

Suppressor capacity of iron nanoparticles biosynthesized using Salvia chloroleuca leaf aqueous extract on methadone-induced cell death in PC12: Formulation a new drug from relationship between the nanobiotechnology and neurology sciences

Metallic nanoparticles have gained significant attention in the area of biomedical technology. Because of its high surface area, metallic nanoparticles are being widely used in various fields including the medical and engineering sciences. One of the valuable applications of metallic nanoparticles especially copper, zinc, and iron nanoparticles is increasing the physiological function of central nervous system. Besides, Iranian people are using the Salvia chloroleuca for neuroprotective properties. In the present research, iron nanoparticles were biosynthesized by S. chloroleuca leaf aqueous extract as reducing and stabilizing agents. Also, we revealed the protective effect of FeNPs in methadone-treated PC12 cells. FeNPs were characterized and analyzed using common nanotechnology techniques including FT-IR, UV–Vis. spectroscopy; EDS, TEM, and FE-SEM. TEM and FE-SEM images revealed a uniform spherical morphology for FeNPs. In the biological part of the current study, the both treatments of FeNPs significantly (p ≤ 0.01) reduced the cell cytotoxicity and cell death index as well as increased the cell viability and cell proliferation in methadone-treated PC12 cells. In these treatments, mitochondrial membrane potential significantly (p ≤ 0.01) increased compared to methadone-induced PC12 cells. DPPH free radical scavenging test was did to evaluate the antioxidant potentials of FeCl₃, S. chloroleuca, and FeNPs. DPPH test indicated similar antioxidant activities for S. chloroleuca, FeNPs, and butylated hydroxytoluene. In current experiment, we concluded that iron nanoparticles biosynthesized by S. chloroleuca leaf aqueous extract suppressed methadone-induced cell death in a dose-dependent manner in PC12 cells.