CdTe/CdO nH2O核壳纳米复合粒子的水相合成及光学特性.

"研究了CdTe/CdO?nH2O核壳纳米复合物的水相合成及其光学特性． 以巯基乙酸为稳定剂通过氯化镉和碲氢化钠反应制备了碲化镉纳米晶． 在反应过程中, 反应前驱溶液中镉离子与碲离子的摩尔浓度比对最终制备的碲化镉纳米晶的荧光强度起到了极其重要的作用． 在pH值为8.2, 镉离子与碲离子摩尔浓度比为4.0的情况下,制备出了具有最强荧光强度的碲化镉量子点．之后,CdTe/CdO?nH2O核壳纳米复合物在水相中制备出来．在适当的氢氧化镉沉积在碲化镉纳米粒子表面后,碲化镉量子点的荧光大大增强．所制备的CdTe/C     

聚苯胺/钡铁氧体复合材料的制备及电磁性能

"采用原位掺杂聚合法,将聚苯胺对粒径在60~80 nm的M型钡铁氧体颗粒(BaFe12O19)进行包覆,得到了具有导电性和磁性的复合材料．通过X射线衍射、傅利叶变换红外光谱仪、扫描电镜和透射电镜等测试手段对材料的形貌和结构进行了表征．结果表明：PANI链段与BaFe12O19颗粒之间存在着作用力．使用振动磁强计和四探针法测定了复合材料的磁性能与电性能,其中50%复合材料的饱和磁化强度为22.2 emu/g,电导率为0.069 S/cm．"     

黄芩的1H NMR指纹图谱研究

利用PFT-NMR 核磁共振波谱仪测定了黄芩提取物的¹H NMR图谱,对黄芩提取物的¹H NMR指纹图谱进行了解析,并与黄芩苷元、千层纸素A、汉黄芩素和黄芩苷进行了比较,获得了黄芩提取物的特征峰,并利用向量夹角法计算了不同指纹图谱的相似度;结果表明不同黄芩提取物的¹H NMR指纹图谱都显示出黄酮类有效成分特征共振峰,并具有很好的重现性和高度的特征性,可以成为黄芩真伪鉴别的依据;不同黄芩的¹H NMR指纹图谱的相似度计算结果定量地评价了不同指纹图谱的相似性.     

BirA*-protein A fusion protein based BioEnhancer amplifies western blot immunosignal

Western blot (protein immunoblot) is a widely used analytical technique in molecular biology. Utilizing the specific recognizing primary antibody, proteins immobilized on various matrix are investigated by subsequent visualization steps, for example, by the horse radish peroxidase conjugated secondary antibody incubation. Methods to improve the sensitivity in protein identification or quantification are appreciated by biochemists. Herein, we report a new strategy to amplify Western blot signals by constructing a probe with proximal labeling and IgG targeting abilities. The R118G mutation attenuated the biotin-AMP binding affinity of the bacterial biotin ligase BirA*, offering a proximity-dependent labeling ability, which could be used as a signal amplifier. We built a BirA*-protein A fusion protein (BioEnhancer) that specifically binds to IgG and adds biotin tags to its proximal amine groups, enhancing the immunosignal of target proteins. In our experiments, the BioEnhancer system amplified the immunosignal by tenfold compared to the standard western blot. Additionally, our strategy could couple with other signal enhancement methods to further increase the western blot sensitivity.     

电子束敏感材料的原子尺度结构研究

分子筛和金属有机骨架(MOF)材料以其独特的孔道和骨架结构在催化、 储能、 干燥及净化和吸附分离等领域有着广泛应用, 对其结构的原子尺度表征对于深入理解其构效关系具有重要意义. 但其大孔道结构和有机骨架使得它们对电子束辐照极为敏感, 在常规透射电镜成像模式下结构会很快被破坏变为非晶, 从而无法获得孔道和骨架的原子排列信息. 最近发展起来的基于积分差分相位衬度扫描透射电子显微(iDPC-STEM)技术在电子敏感材料和轻元素组分成像方面展现出明显优势, 使得对多孔骨架材料及烃池物种的表征成为了可能. 本文综述了本课题组近期利用该技术对分子筛和MOF材料原子尺度结构方面的研究. 将iDPC-STEM技术应用到ZSM-5分子筛催化剂中, 实现了对该分子筛的原子级骨架结构的成像分析. 在MOF体系中, 利用该技术观察到MIL-101骨架内部有机连接体与金属节点的配位方式, 在此基础上解析了MIL-101结构中有机配体的连接和金属节点的苯环结构, 并观察了MOF的原子级表面、 界面和缺陷等局域结构特征. 最后对iDPC-STEM技术在原子尺度成像方面的应用潜力进行了总结与展望.     

理论研究晶体场效应和电荷转移效应对Co2+的2p电子X射线L2,3吸收边光谱的影响

运用多重态计算方法研究了在正八面体对称性的晶体场中Co²⁺离子的2p电子X射线L_2,3吸收边光谱, 研究了Co²⁺离子和周围的配位离子之间的正八面体(O_h)晶体场效应和相应的电荷转移效应对于吸收光谱的影响. 系统讨论了在多重态计算中起作用的所有物理参数对CoO和CoCl₂的X射线吸收光谱特性的特定影响及其物理机制. 将计算得出的光谱数据和同样具有O_h对称性结构Co²⁺离子的CoO和CoCl₂实验光谱数据进行了对比, 在实验光谱数据中发现的特征被确定为来自不同自旋态, 并且光谱强度的变化与晶体场的强度相关, 揭示了其中包含的电荷转移效应. 本文为低对称性复杂系统的多重态计算提供了一个基础的参考标准, 可以适用于含有钴元素或其它过渡金属的复杂体系的X射线吸收光谱的理论计算.     

Zwitterionic comb-like lipid polymers encapsulating linalool for increasing the fragrance retention time

Fragrances are widely used in cosmetics,apparel and detergents.However,the rapid evaporation of the aro ma shortens the useful life of the aromatic product.Therefore,improving the fragrance retention time of aromatic products and prolonging the service life of aromatic products are the key scientific problems that need to be solved in current aromatic products.In this study,zwitterionic comb-like lipid polymers were synthesized to encapsulate the fragrance molecule linalool.The results showed that the zwitterionic comb lipid molecules were capable of encapsulating more linalool than linear lipid molecules.At the same time,the zwitterionic comb-like lipid molecules also limited the slow release rate of the aroma,thereby increasing the fragrance retention time of the nano-fragrance.     

Recent advances in the improvement of g-C3N4 based photocatalytic materials

g-C₃N₄ have been widely used in the fields of photocatalytic hydrogen production,photocatalytic degradation of dyes and oxidative degradation of toxic gases due to their excellent performance.It has attracted extensive attention in recent years due to its highly efficient photocatalytic capacity of hydrogen generation,water oxidation,carbon dioxide reduction and degradation of organic pollutants.Because of the abundant carbon and nitrogen composition of the earth,large-scale production and industrial applications of this material are possible.The modification of this material makes its performance more excellent so that this new material can obtain a steady stream of vitality.These outstanding works have become important materials and milestones on the road to mankind's photocatalytic hydrogen production.This review will begin with the basic idea of designing,synthesizing and improving g-C₃N₄ based photocatalytic materials,and introduce the latest development of g-C₃N₄ photocatalysts in hydrogen production from four aspects of controlling the carbon/nitrogen ratio,morphology,element doping and heterojunction structure of g-C₃N₄ materials.     

Cationic and temperature-sensitive liposomes loaded with eugenol for the application to silk

Silk has been widely used in the clothing industry due to their soft and smooth features, good biocompatibility, good heat dissipation, warmth and ultraviolet resistance. The application of fragrance to silk can significantly improve the performance of silk. However, there are two key scientific problems that need to be solved: slowing down the release rate of fragrances and increasing the scent lasting time of silk. In this study, cationic and temperature-sensitive liposomes were designed and prepared to encapsulate eugenol. These fragrance-loaded liposomes significantly slowed down the release rate of the fragrance and controlled the release rate of the fragrance in a thermo-sensitive manner. The liposomes adhered to the silk through electrostatic adsorption interaction. The positive charge on the fragrance-loaded liposomes neutralized much negative charge on silk and thereby increasing the adhesion efficiency.     

Effect of poly(methylhydrogen)siloxane modification on adjusting mechanical properties of bamboo flour‐reinforced HDPE composites

Cellulose - Poly(methylhydrogen)siloxane (PMHS) was applied for hydrophobic modification of bamboo flour (BF) at room temperature based on the dehydrogenation between hydroxyl groups of BF and...