Cryptanalysis of a dynamic ID‐based remote user authentication with key agreement scheme

A dynamic user authentication scheme allows a user and a remote server to authenticate each other without leaking the user's identity. In 2011, Wen and Li proposed an improved dynamic ID‐based remote user authentication with key agreement scheme for mobile and home networks. They claimed that their scheme was more secure than the scheme of Wang et al. However, we demonstrate that their scheme is vulnerable to the privileged insider, off‐line password guessing, impersonation, and server spoofing attacks. At the same time, it does not provide any user anonymity and forward secrecy property. Thus, it is not feasible for real‐life implementation.Copyright © 2012 John Wiley & Sons, Ltd.     

Wireless Energy Transfer System with Multiple Coils via Coupled Magnetic Resonances

A general equivalent circuit model is developed for a wireless energy transfer system composed of multiple coils via coupled magnetic resonances. To verify the developed model, four types of wireless energy transfer systems are fabricated, measured, and compared with simulation results. To model a system composed of n‐coils, node equations are built in the form of an n‐by‐n matrix, and the equivalent circuit model is established using an electric design automation tool. Using the model, we can simulate systems with multiple coils, power sources, and loads. Moreover, coupling constants are extracted as a function of the distance between two coils, and we can predict the characteristics of a system having coils at an arbitrary location. We fabricate four types of systems with relay coils, two operating frequencies, two power sources, and the function of characteristic impedance conversion. We measure the characteristics of all systems and compare them with the simulation results. The flexibility of the developed model enables us to design and optimize a complicated system consisting of many coils.     

16‐QAM‐Based Highly Spectral‐Efficient E‐band Communication System with Bit Rate up to 10 Gbps

This paper presents a novel 16‐quadrature‐amplitude‐modulation (QAM) E‐band communication system. The system can deliver 10 Gbps through eight channels with a bandwidth of 5 GHz (71‐76 GHz/81‐86 GHz). Each channel occupies 390 MHz and delivers 1.25 Gbps using a 16‐QAM. Thus, this system can achieve a bandwidth efficiency of 3.2 bit/s/Hz. To implement the system, a driver amplifier and an RF up‐/down‐conversion mixer are implemented using a 0.1 µm gallium arsenide pseudomorphic high‐electron‐mobility transistor (GaAs pHEMT) process. A single‐IF architecture is chosen for the RF receiver. In the digital modem, 24 square root raised cosine filters and four (255, 239) Reed‐Solomon forward error correction codecs are used in parallel. The modem can compensate for a carrier‐frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of 10^?5 at a signal‐to‐noise ratio of about 21.5 dB.     

Small‐Size and High‐Isolation MIMO Antenna for WLAN

A small‐sized (15 mm×30 mm) planar monopole MIMO antenna that offers high‐isolation performance is presented in this letter. The antenna is miniaturized using inductive coupling within a meander‐line radiator and capacitive coupling between a radiator and an isolator. High isolation is achieved by a T‐shaped stub attached to the ground plane between two radiators, which also contributes to the small size using a folded structure and the capacitive coupling with radiators. The proposed antenna operates for the WLAN band within 2.4 GHz to 2.483 GHz. The measured isolation (S₂₁) is about –30 dB, and the envelope correlation coefficient is less than 0.1.     

High-efficiency red electroluminescence from europium complex containing a neutral dipyrido(3,2-a:2′,3′-c)phenazine ligand in PLEDs

In order to obtain high-efficiency monochromatic red emission in polymer light-emitting devices, a tris(dibenzoylmethanato)(dipyrido(3,2-a:2′,3′-c)phenazine) europium [Eu(DBM)₃(DPPZ)] doped single-emissive-layer devices were fabricated using a blend of poly(9,9-dioctyl-fluorence) and 2-tert-butyl-phenyl-5-biphenyl-1,3,4-oxadiazole as a host matrix by solution process. Significantly improved electro-luminescent properties with sharp red emission at 611.5 nm were displayed in the Eu(DBM)₃(DPPZ)-doped devices at dopant concentrations from 1 to 8 wt.%. The highest luminance up to 1783 cd/m² at 2 wt.% dopant concentration, as well as the maximum external quantum efficiency of 2.5% and current efficiency of 3.8 cd/A were obtained at 1 wt.% dopant concentration.     

Development of a new diindenopyrazine–benzotriazole copolymer for multifunctional application in organic field-effect transistors,polymer solar cells and light-emitting diodes

A new donor–acceptor (D?A) copolymer (PIPY–DTBTA) containing 6,12-dihydro-diindeno[1,2-b;1′,2′-e]pyrazine donor and benzotriazole acceptor was synthesized and characterized for multifunctional applications in organic field-effect transistors (OFETs), polymer solar cells (PSCs) and polymer light-emitting diodes (PLEDs). The polymer exhibits high molecular weights, excellent film-forming ability, a deep HOMO energy level, and good solution processability. Solution-processed thin film OFETs based on this polymer revealed good p-type characteristic with a high hole mobility up to 0.0521 cm² V^?1 s^?1. Bulk-heterojunction PSCs comprising this polymer and PC₆₁BM gave a power conversion efficiency (PCE) of 0.77%. The single-layer PLEDs based on PIPY–DTBTA emitted a yellow–red light with a maximum brightness of 385 cd m^?2 at the turn-on voltage of 6 V.     

Resource efficient network design and traffic grooming strategy with guaranteed survivability

In WDM networks, path protection has emerged as a widely accepted technique for providing guaranteed survivability of network traffic. However, it requires allocating resources for backup lightpaths, which remain idle under normal fault-free conditions. In this paper, we introduce a new design strategy for survivable network design, which guarantees survivability of all ongoing connections that requires significantly fewer network resources than protection based techniques. In survivable routing, the goal is to find a Route and Wavelength Assignment (RWA) such that the logical topology remains connected for all single link failures. However, even if the logical topology remains connected after any single link fault, it may not have sufficient capacity to support all the requests for data communication, for all single fault scenarios. To address this deficiency, we have proposed two independent but related problem formulations. To handle our first formulation, we have presented an Integer Linear Program (ILP) that augments the concept of survivable routing by allowing rerouting of sub-wavelength traffic carried on each lightpath and finding an RWA that maximizes the amount of traffic that can be supported by the network in the presence of any single link failure. To handle our second formulation, we have proposed a new design approach that integrates the topology design and the RWA in such a way that the resulting logical topology is able to handle the entire set of traffic requests after any single link failure. For the second problem, we have first presented an ILP formulation for optimally designing a survivable logical topology, and then proposed a heuristic for larger networks. Experimental results demonstrate that this new approach is able to provide guaranteed bandwidth, and is much more efficient in terms of resource utilization, compared to both dedicated and shared path protection schemes.     

Soft‐output MMSE V‐BLAST receiver with MMSE channel estimation under correlated Rician fading MIMO channels

For wireless multiple‐input multiple‐output (MIMO) communications systems, both channel estimation error and spatial channel correlation should be considered when designing an effective signal detection system. In this paper, we propose a new soft‐output MMSE based Vertical Bell Laboratories Layered Space‐Time (V‐BLAST) receiver for spatially‐correlated Rician fading MIMO channels. In this novel receiver, not only the channel estimation errors and channel correlation but also the residual interference cancellation errors are taken into consideration in the computation of the MMSE filter and the log‐likelihood ratio (LLR) of each coded bit. More importantly, our proposed receiver generalizes all existing soft‐output MMSE V‐BLAST receivers, in the sense that, previously proposed soft‐output MMSE V‐BLAST receivers can be derived as the reduced forms of our receiver when the above three considered factors are partially or fully simplified. Simulation results show that the proposed soft‐output MMSE V‐BLAST receiver outperforms the existing receivers with a considerable gain in terms of bit‐error‐rate (BER) performance. Copyright © 2011 John Wiley & Sons, Ltd.     

An efficient anonymous communication protocol for wireless sensor networks

Anonymous communication is very important for many wireless sensor networks, because it can be used to hide the identity of important nodes, such as the base station and a source node. In sensor networks, anonymous communication includes several important aspects, such as source anonymity, communication relationship anonymity, and base station anonymity. Existing sensor network anonymous schemes either cannot achieve all the anonymities or have large computation, storage, and communication overheads. In this paper, we propose an efficient anonymous communication protocol for sensor networks that can achieve all the anonymities while having small overheads on computation, storage, and communication. We compare our anonymous communication protocol with several existing schemes, and the results show that our protocol provides strong anonymity protection and has low overheads. Copyright © 2011 John Wiley & Sons, Ltd.     

Bandwidth‐satisfied routing in multi‐rate MANETs by cross‐layer approach

Previous quality‐of‐service (QoS) routing protocols in mobile ad hoc networks (MANETs) determined bandwidth‐satisfied routes for QoS applications. Since the multi‐rate enhancements have been implemented in MANETs, QoS routing protocols should be adapted to exploit them fully. However, existing works suffer from one bandwidth‐violation problem, named the hidden route problem (HRP), which may arise when a new flow is permitted and only the bandwidth consumption of the hosts in the neighborhood of the route is computed. Without considering the bandwidth consumption to ongoing flows is the reason the problem is introduced. This work proposes a routing protocol that can avoid HRP for data rate selection and bandwidth‐satisfied route determination with an efficient cross‐layer design based on the integration of PHY and MAC layers into the network layer. To use bandwidth efficiently, we aim to select the combination of data rates and a route with minimal bandwidth consumption to the network, instead of the strategy adopted in the most previous works by selecting the combination with the shortest total transmission time. Using bandwidth efficiently can increase the number of flows supported by a network. Copyright 2010 John Wiley & Sons, Ltd.