壳聚糖衍生物的制备及其吸附性能

壳聚糖衍生物的制备及其吸附性能曲荣君，马千里，郑秀丽，孙言志（烟台师范学院化学系烟台２６４０２５）关键词壳聚精衍生物，制备，吸附壳聚糖（ＣＴＳ）是重金瞩离子的吸附剂￣［１，２］，由于壳聚精分子中的－ＮＨ＿２在ｐＨ较低的水溶液易形成而使ＣＴＳ溶于水，造...     

无水醋酸镍与水杨醛肟固相配位反应的热化学研究

用新型的具有恒定温度环境的反应热量计，以６ｍｏｌ·ｄｍ－３ＨＣｌ溶液为量热溶剂，分别测定了ＨＳＡＯ，Ｎｉ（Ａｃ）２和Ｎｉ（ＳＡＯ）２，ＨＡｃ先后溶于该溶剂的溶解焓．设计了一个新的热化学循环，计算得到该配位反应的反应焓ΔｒＨ＝－８６．０７５ｋＪ·ｍｏｌ－１，并估算出了ΔｆＨ［Ｎｉ（ＳＡＯ）２，２９８Ｋ］＝－４０１．３３６ｋＪ·ｍｏｌ－１．     

Batch fabrication of disposable screen printed SERS arrays

A novel facile method of fabricating disposable and highly reproducible surface-enhanced Raman spectroscopy (SERS) arrays using screen printing was explored. The screen printing ink containing silver nanoparticles was prepared and printed on supporting materials by a screen printing process to fabricate SERS arrays (6 × 10 printed spots) in large batches. The fabrication conditions, SERS performance and application of these arrays were systematically investigated, and a detection limit of 1.6 × 10(-13) M for rhodamine 6G could be achieved. Moreover, the screen printed SERS arrays exhibited high reproducibility and stability, the spot-to-spot SERS signals showed that the intensity variation was less than 10% and SERS performance could be maintained over 12 weeks. Portable high-throughput analysis of biological samples was accomplished using these disposable screen printed SERS arrays.     

Boronic Acid functionalized core-shell polymer nanoparticles prepared by distillation precipitation polymerization for glycopeptide enrichment

The boronic acid-functionalized core-shell polymer nanoparticles, poly(N,N-methylenebisacrylamide-co-methacrylic acid)@4-vinylphenylboronic acid (poly(MBA-co-MAA)@VPBA), were successfully synthesized for enriching glycosylated peptides. Such nanoparticles were composed of a hydrophilic polymer core prepared by distillation precipitation polymerization (DPP) and a boronic acid-functionalized shell designed for capturing glycopeptides. Owing to the relatively large amount of residual vinyl groups introduced by DPP on the core surface, the VPBA monomer was coated with high efficiency, working as the shell. Moreover, the overall polymerization route, especially the use of DPP, made the synthesis of nanoparticles facile and time-saving. With the poly(MBA-co-MAA)@VPBA nanoparticles, 18?glycopeptides from horseradish peroxidase (HRP) digest were captured and identified by MALDI-TOF mass spectrometric analysis, relative to eight glycopeptides enriched by using commercially available meta-aminophenylboronic acid agarose under the same conditions. When the concentration of the HRP digest was decreased to as low as 5?nmol, glycopeptides could still be selectively isolated by the prepared nanoparticles. Our results demonstrated that the synthetic poly(MBA-co-MAA)@VPBA nanoparticles might be a promising selective enrichment material for glycoproteome analysis.     

A label-free thrombin binding aptamer as a probe for highly sensitive and selective detection of lead(II) ions by a resonance Rayleigh scattering method

The binding of lead(II) ions with unusually high affinity to a thrombin binding aptamer resulted in an enhancement of resonance Rayleigh scattering (RRS). A simple, sensitive, and selective assay for the direct determination of trace amounts of Pb(2+) on the basis of RRS has been proposed.     

Near‐Infrared‐Controlled,Targeted Hydrophobic Drug‐Delivery System for Synergistic Cancer Therapy

Hydrophobicity has been an obstacle that hinders the use of many anticancer drugs. A critical challenge for cancer therapy concerns the limited availability of effective biocompatible delivery systems for most hydrophobic therapeutic anticancer drugs. In this study, we have developed a targeted near‐infrared (NIR)‐regulated hydrophobic drug‐delivery platform based on gold nanorods incorporated within a mesoporous silica framework (AuMPs). Upon application of NIR light, the photothermal effect of the gold nanorods leads to a rapid rise in the local temperature, thus resulting in the release of the entrapped drug molecules. By integrating chemotherapy and photothermotherapy into one system, we have studied the therapeutic effects of camptothecin‐loaded AuMP‐polyethylene glycol‐folic acid nanocarrier. Results revealed a synergistic effect in vitro and in vivo, which would make it possible to enhance the therapeutic effect of hydrophobic drugs and decrease drug side effects. Studies have shown the feasibility of using this nanocarrier as a targeted and noninvasive remote‐controlled hydrophobic drug‐delivery system with high spatial/temperal resolution. Owing to these advantages, we envision that this NIR‐controlled, targeted drug‐delivery method would promote the development of high‐performance hydrophobic anticancer drug‐delivery system in future clinical applications.     

Structural Diversity from the Transannular Cyclizations of Natural Germacrone and Epoxy Derivatives: A Theoretical–Experimental Study

Treatment of germacrone ( 1 ) with different electrophiles, and of its epoxy derivatives germacrone‐4,5‐epoxide ( 2 ), germacrone‐1,10‐epoxide ( 3 ) and isogermacrone‐4,5‐epoxide ( 4 ) with Brönsted/Lewis acids and Ti^III, gives rise to a great structural diversity. Thus, by using a maximum of two steps, the production of more than 40 compounds corresponding to 14 skeletons is described. Computational calculations rationalizing the structural divergence produced are also described. Finally, since some of the compounds generated are bioactive natural sesquiterpenes, the mechanisms of formation of these substances will provide new insights in their biosynthesis.     

Addition of Organometallic Reagents to Chiral N‐Methoxylactams: Enantioselective Syntheses of Pyrrolidines and Piperidines

Enantioselective iridium‐catalyzed allylic substitutions were used to prepare N‐allyl hydroxamic acid derivatives that were suitable for ring‐closing metathesis, giving N‐methoxylactams. Reactions of these derivatives with Grignard or organolithium compounds gave hemiaminals, which could be reduced diastereoselectively via acyliminium intermediates to give cis‐piperidines or cis‐pyrrolidines with substituents in the 2,6‐ or 2,5‐positions, respectively. In addition, compounds with a quaternary carbon center could be synthesized by corresponding reactions with potassium cyanide/AcOH. The procedures were applied in the syntheses of alkaloids (?)‐209D and (+)‐prosophylline.     

Electropolymerization of single‐walled carbon nanotubes composited with polypyrrole as a solid‐phase microextraction fiber for the detection of acrylamide in food samples using GC with electron‐capture detection

We developed a solid‐phase microextraction coupled to GC with electron‐capture detection method for the detection of acrylamide in food samples. Single‐walled carbon nanotubes and polypyrrole were electropolymerized onto a stainless‐steel wire as a coating, which possessed a homogeneous, porous, and wrinkled surface, chemical and mechanical stability, long lifespan (over 300 extractions), and good extraction efficiency for acrylamide. The linearity range between the signal intensity and the acrylamide concentration was found to be in the range 0.001–1 μg/mL, and the coefficient of determination was 0.9985. The LOD, defined as three times the baseline noise, was 0.26 ng/mL. The reproducibility for each single fiber (n = 6) and the fiber‐to‐fiber (n = 5) repeatability prepared in the same batch were less than 4.1 and 11.2%, respectively.     

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Due to the difficulty in achieving high efficiency and high color purity simultaneously, blue emission is the limiting factor for the performance and stability of OLEDs. Since 2003, we have been working on organic light‐emitting diodes (OLEDs), especially on blue light. After a series of molecular designs, novel strategies have been proposed from different aspects. At first, highly efficient deep blue emission could be achieved through molecular design with highly twisted structure to suppress fluorescence quenching and redshift. Deep blue emitters with high efficiency in solid state, a twisted structure with aggregation induced emission (AIE) characteristics was incorporated to inhibit molecular aggregation, and triplet‐triplet fusion (TTF) and hybridized localized charge transfer (HLCT) were adopted to increase the ratio of triplet exciton used. Secondly, a highly efficient blue OLED could be achieved through improving charge transport. New electron transport materials (ETMs) with wide band gap were developed to control charge transport balance in devices. Thirdly, a highly efficient deep blue emission could be achieved through a mesoscopic structure of out‐coupling layer. A mesoscopic photonic structured organic thin film was fabricated on the top of metal electrode by self‐aggregation in order to improve the light out‐coupling efficiency.