A projection method for solving incompressible viscous flows on domains with moving boundaries

In this paper, a projection method is presented for solving the flow problems in domains with moving boundaries. In order to track the movement of the domain boundaries, arbitrary‐Lagrangian–Eulerian (ALE) co‐ordinates are used. The unsteady incompressible Navier–Stokes equations on the ALE co‐ordinates are solved by using a projection method developed in this paper. This projection method is based on the Bell's Godunov‐projection method. However, substantial changes are made so that this algorithm is capable of solving the ALE form of incompressible Navier–Stokes equations. Multi‐block structured grids are used to discretize the flow domains. The grid velocity is not explicitly computed; instead the volume change is used to account for the effect of grid movement. A new method is also proposed to compute the freestream capturing metrics so that the geometric conservation law (GCL) can be satisfied exactly in this algorithm. This projection method is also parallelized so that the state of the art high performance computers can be used to match the computation cost associated with the moving grid calculations. Several test cases are solved to verify the performance of this moving‐grid projection method. Copyright © 2004 John Wiley Sons, Ltd.     

Transient free‐surface flow of a viscoelastic fluid in a narrow channel

The interplay between inertia and elasticity is examined for transient free‐surface flow inside a narrow channel. The lubrication theory is extended for the flow of viscoelastic fluids of the Oldroyd‐B type (consisting of a Newtonian solvent and a polymeric solute). While the general formulation accounts for non‐linearities stemming from inertia effects in the momentum conservation equation, and the upper‐convected terms in the constitutive equation, only the front movement contributes to non‐linear coupling for a flow inside a straight channel. In this case, it is possible to implement a spectral representation in the depthwise direction for the velocity and stress. The evolution of the flow field is obtained locally, but the front movement is captured only in the mean sense. The influence of inertia, elasticity and viscosity ratio is examined for pressure‐induced flow. The front appears to progress monotonically with time. However, the velocity and stress exhibit typically a strong overshoot upon inception, accompanied by a plug‐flow behaviour in the channel core. The flow intensity eventually diminishes with time, tending asymptotically to Poiseuille conditions. For highly elastic liquids the front movement becomes oscillatory, experiencing strong deceleration periodically. A multiple‐scale solution is obtained for fluids with no inertia and small elasticity. Comparison with the exact (numerical) solution indicates a wide range of validity for the analytical result. Copyright © 2004 John Wiley & Sons, Ltd.     

Accurate Gain Flattening Filters Manufactured by Optical Compensation Monitoring Method

GFFs with less than 0.4 dB peak-to-peak error functions are routinely fabricated using commercially available coating machines by utilizing the natural error compensation mechanism of wavelength variable turning point optical monitoring method.     

Investigation of charge effects on poling and stability for corona-poled polymer films

The optimal corona-poling temperature of polymer films was accurately determined by measuring the temperature dependence of the in situ second-harmonic (SH) intensity profile under the applied poling electric field. The in situ SH intensity profile was first measured by probing both the surface voltages and the poling currents induced by surface/space charges for the corona-poled polymer films. Moreover, charge effects on the stability of the chromophore orientation were first studied by using the thermally stimulated discharge-current technique. PACS 72.20.Jv; 42.65.Ky; 73.61.Ph; 81.40.Tv     

Bound for Minkowski metric or quadratic metric applied to VQcodeword search

A bound for a Minkowski metric based on L_p distortion measure is proposed and evaluated as a means to reduce the computation in vector quantisation. This bound provides a better criterion than the absolute error inequality (AEI) elimination rule on the Euclidean distortion measure. For the Minkowski metric of order n, this bound contributes the elimination criterion from the L₁ metric to L _n metric. This bound can also be an extended quadratic metric which can be a hidden Markov model (HMM) with a Gaussian mixture probability density function (PDF). In speech recognition, the HMM with the Gaussian mixture VQ codebook PDF has been shown to be a promising method     

Modeling and design of an AC to DC converter

A step-up/down single-phase AC-to-DC power converter without current sensor is proposed to achieve high performance and simple control logic. The power converter adopts a front-end diode rectifier so that only one active switch is required. The familiar state-space averaging technique for discontinuous mode DC-to-DC power converters is extended to model the proposed AC-to-DC converter. Unlike the existing model, which is valid only for a very low frequency range, namely below line frequency, the proposed model is applicable up to half switching frequency. The design of the controller is detailed. Selected experimental results are presented to verify the proposed theory     

随机删失场合半参数回归模型参数估计的重对数律‘

本文探讨了随机删失场合半参数回归模型的参数估计问题.考虑半参数回归模型Y =X}}3 + g(T)十。，其中(X,T)’为取值于Kp X [0,1〕上的随机向量，月为1'维未知参数向量，8为定义于【0.1]上的未知函数，。为随机误差，Ee = 0 . Eez = az }。未知，且(X ,T)与。独立，).被一个与之独立的随机变量V所截.此时仅能观察到:Z=min(Y,V),o=1(Y簇V)，参数I3,az的估计量禽及公 z可综合非参数的权函数估计法与参数的最小二乘估计方法得到.本文对核函数的情形得到了念及ar z的精确收敛速度即重对数律.     

Traveling wave method for calculation of linewidth, frequencytuning, and stability of semiconductor lasers

The authors present a new traveling wave method for calculating the linewidth, the frequency tuning efficiency, and a mode stability parameter for a general class of laser-diode structures. The method leads to simple semianalytic expressions which allow an easy numerical determination of the three parameters     

Simple autocorrelation technique based on degree-of-polarization measurement

We demonstrate a simple optical-fiber-based autocorrelator for picosecond short pulses based on degree-of-polarization measurement while tuning the relative delay of the two orthogonal polarization states of the pulse. The pulsewidths of 20-, 40-, and 80-GHz pulse trains and 2-ps pulses generated by a mode-locked laser are measured. The <-10-dBm optical powers are used in the experiment. The measurement results agree well with the measurements using conventional techniques. Compared with conventional autocorrelators, this technique has the advantages of 1) wavelength independent, 2) significant less alignment, and 3) no high power required.     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.