Microwave absorption properties of composite powders with low density

The composites of barium ferrite coated on hollow ceramic microspheres were prepared using sol-gel technique. The crystal structure, morphology and microwave absorption properties of composite powders with different weight ratio of microspheres were studied with XRD, EDS, FESEM and vector network analyzer. The results show that the microwave absorption properties of composite powders are greatly improved. The maximum microwave loss of composite powders reaches 31 dB with an amount of 50 wt.% microspheres, and its density is only about 1.80 g/cm³. The effect of hollow ceramic microspheres on the microwave absorption property is also discussed.     

Optimization of the locations of the loudspeaker and absorption material in a small room

The sound field both in the loudspeaker box and in the room is calculated by an analytical solution of three-dimensional wave equation. It is shown in theory that the amplitude response in small rooms is affected by the following positions: driver position on the front panel of the box, box position in the room, absorption material position in the box and absorption material position on the interior walls of the room. Both our computer prediction and experiments prove that the optimum positions are beneficial to the amplitude response.     

可调谐液晶法-珀滤光片的研究

提出了一种可用于密集波分复用系统中的新型可调谐滤光片的设计方法,该设计利用了液晶的双折射现象,以及液晶盒内法-珀效应,从理论上分析了器件的光谱特性,计算了液晶分子的折射率调制和其分子转动角度的关系.并对器件进行了性能测试.实验结果与理论吻合较好.     

Synthesis, Spectroscopy, and Electrochemistry of Metallophthalocyanines Substituted by Propylenedithiotetrathiafulvalene Derivatives

Zinc(II) and magnesium(II) phthalocyanines bearing four substituted propylenedithiotetrathiafulvalene (PDT-TTF) units were synthesized and characterized by NMR, MS, EA, and UV/VIS spectra. The absorption peaks of two target molecules were hypsochromically shifted compared with the phthalocyanine parent compound. Studies using cyclic voltammetry indicated that introduction of Zn and Mg as central metals enhanced the electronwithdrawing between the phthalocyanine core and the PDT-TTF unit, thus losing one electron to form (PDT-TTF)⁺ becomes more difficult.     

The magnetization behavior of nanocrystalline permanent magnets based on the Stoner–Wohlfarth Model

The magnetization behavior in nanocrystalline permanent magnets has been investigated using mean field Stoner–Wohlfarth model. The model is comparatively simple but allows the numerical treatment of extended nanostructures. The predominant intergrain exchange coupling is expressed by a mean field constant N_m in spite of no explicit relationship between N_m and the microstructure. By this model, the experimental phenomena, such as the remanence enhancement, the shape of demagnetization curve, the irreversible magnetization, the exchange bias field and their respective temperature dependence, can be well explained. The N_m dependence of magnetic properties has been extensively discussed in the present paper.     

Transition‐metal‐catalyzed reactions of 5‐methylene‐2‐oxazolidinone and 5‐methylene‐1,3‐thiazolidine‐2‐thione with isocyanates

5‐Methylene‐2‐oxazolidinone (1) and 5‐methylene‐1,3‐thiazolidine‐2‐thione (4) react with various isocyanates to give the corresponding urethanes 3 and 5 in high yields in the presence of palladium(0) or palladium(II) catalyst under mild reaction conditions. A mechanism is proposed. Copyright © 2003 John Wiley & Sons, Ltd.     

Spectral and Pseudospectral Approximations Using Hermite Functions: Application to the Dirac Equation

We consider in this paper spectral and pseudospectral approximations using Hermite functions for PDEs on the whole line. We first develop some basic approximation results associated with the projections and interpolations in the spaces spanned by Hermite functions. These results play important roles in the analysis of the related spectral and pseudospectral methods. We then consider, as an example of applications, spectral and pseudospectral approximations of the Dirac equation using Hermite functions. In particular, these schemes preserve the essential conservation property of the Dirac equation. We also present some numerical results which illustrate the effectiveness of these methods.     

Design of photonic crystal fibers for dispersion-related applications

A general procedure for design of photonic crystal fibers (PCFs) with desirable dispersion properties is presented. The design model is based on the combination of a rigorous vector mode solver and a scaling transformation for the dispersion properties of the PCFs. In comparison with the conventional design method, the new design procedure is more efficient and can be readily automated for the purpose of design optimization. Several applications of the design procedure, e.g., the design optimization for dispersion shifted fibers, dispersion flattened fibers, and dispersion compensation fibers, are demonstrated and discussed.     

Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.