Nanoshuttered OLEDs: Unveiled Invisible Auxiliary Electrode

In this study, organic light‐emitting diodes (OLEDs) with enhanced optical properties are fabricated by inserting a nanosized stripe auxiliary electrode layer (nSAEL) between the substrate and an indium tin oxide (ITO) layer. This design can avoid the shortcomings of conventional microsized layers while maintaining high optical uniformity due to the improved conductivity of the electrode. The primary advantage is that the nSAEL (submicrometer scale) is no longer visible to the naked eye. Moreover, the reflective shuttered (grating) structure of the nSAEL increases the forward‐directed light by the microcavity (MC) effect and minimizes the loss of light by the extracting the surface plasmon polariton (SPP) mode. In this study, the degree of the MC and SPP can be controlled with the parameters of the nSAEL by simply conjugating the conditions of laser interference lithography (LIL). Therefore, the current and power efficiencies of the device with an nSAEL with optimized parameters are 1.17 and 1.23 times higher than the reference device at 1000 cd/m², respectively, and at these parameters, the overall sheet resistance is reduced to less than half (48%). All of the processes are verified by comparing the computational simulation results and the experimental results obtained with the actual fabricated device.     

Tomatidine-stimulated maturation of human embryonic stem cell-derived cardiomyocytes for modeling mitochondrial dysfunction

Human embryonic stem cell-derived cardiomyocytes (hESC-CMs) have been reported to exhibit immature embryonic or fetal cardiomyocyte-like phenotypes. To enhance the maturation of hESC-CMs, we identified a natural steroidal alkaloid, tomatidine, as a new substance that stimulates the maturation of hESC-CMs. Treatment of human embryonic stem cells with tomatidine during cardiomyocyte differentiation stimulated the expression of several cardiomyocyte-specific markers and increased the density of T-tubules. Furthermore, tomatidine treatment augmented the number and size of mitochondria and enhanced the formation of mitochondrial lamellar cristae. Tomatidine treatment stimulated mitochondrial functions, including mitochondrial membrane potential, oxidative phosphorylation, and ATP production, in hESC-CMs. Tomatidine-treated hESC-CMs were more sensitive to doxorubicin-induced cardiotoxicity than the control cells. In conclusion, the present study suggests that tomatidine promotes the differentiation of stem cells to adult cardiomyocytes by accelerating mitochondrial biogenesis and maturation and that tomatidine-treated mature hESC-CMs can be used for cardiotoxicity screening and cardiac disease modeling.Subject terms: Heart failure, Embryonic stem cells, Stem-cell differentiation     

Dioscin-Mediated Autophagy Alleviates MPP+-Induced Neuronal Degeneration: An In Vitro Parkinson’s Disease Model

Autophagy is a cellular homeostatic process by which cells degrade and recycle their malfunctioned contents, and impairment in this process could lead to Parkinson’s disease (PD) pathogenesis. Dioscin, a steroidal saponin, has induced autophagy in several cell lines and animal models. The role of dioscin-mediated autophagy in PD remains to be investigated. Therefore, this study aims to investigate the hypothesis that dioscin-regulated autophagy and autophagy-related (ATG) proteins could protect neuronal cells in PD via reducing apoptosis and enhancing neurogenesis. In this study, the 1-methyl-4-phenylpyridinium ion (MPP⁺) was used to induce neurotoxicity and impair autophagic flux in a human neuroblastoma cell line (SH-SY5Y). The result showed that dioscin pre-treatment counters MPP⁺-mediated autophagic flux impairment and alleviates MPP⁺-induced apoptosis by downregulating activated caspase-3 and BCL2 associated X, apoptosis regulator (Bax) expression while increasing B-cell lymphoma 2 (Bcl-2) expression. In addition, dioscin pre-treatment was found to increase neurotrophic factors and tyrosine hydroxylase expression, suggesting that dioscin could ameliorate MPP⁺-induced degeneration in dopaminergic neurons and benefit the PD model. To conclude, we showed dioscin’s neuroprotective activity in neuronal SH-SY5Y cells might be partly related to its autophagy induction and suppression of the mitochondrial apoptosis pathway.     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

First observation of the P-wave spin-singlet bottomonium states hb(1P) and hb(2P)

We report the first observations of the spin-singlet bottomonium states h(b)(1P) and h(b)(2P). The states are produced in the reaction e(+)e(-)→h(b)(nP)π(+)π(-) using a 121.4 fb(-1) data sample collected at energies near the Υ(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We determine M[h(b)(1P)]=(9898.2(-1.0-1.1)(+1.1+1.0)) MeV/c(2) and M[h(b)(2P)]=(10,259.8±0.6(-1.0)(+1.4)) MeV/c(2), which correspond to P-wave hyperfine splittings ΔM(HF)=(+1.7±1.5) and (+0.5(-1.2)(+1.6)) MeV/c(2), respectively. The significances of the h(b)(1P) and h(b)(2P) are 5.5σ and 11.2σ, respectively. We find that the production of the h(b)(1P) and h(b)(2P) is not suppressed relative to the production of the Υ(1S), Υ(2S), and Υ(3S).     

Effects of Y incorporation in TaON gate dielectric on electrical performance of GaAs metal–oxide–semiconductor capacitor

In this study, GaAs metal–oxide–semiconductor (MOS) capacitors using Y‐incorporated TaON as gate dielectric have been investigated. Experimental results show that the sample with a Y/(Y + Ta) atomic ratio of 27.6% exhibits the best device characteristics: high k value (22.9), low interfacestate density (9.0 × 10¹¹ cm^–2 eV^–1), small flatband voltage (1.05 V), small frequency dispersion and low gate leakage current (1.3 × 10^–5A/cm² at V_fb + 1 V). These merits should be attributed to the complementary properties of Y₂O₃ and Ta₂O₅:Y can effectively passivate the large amount of oxygen vacancies in Ta₂O₅, while the positively‐charged oxygen vacancies in Ta₂O₅ are capable of neutralizing the effects of the negative oxide charges in Y₂O₃. This work demonstrates that an appropriate doping of Y content in TaON gate dielectric can effectively improve the electrical performance for GaAs MOS devices.

Capacitance–voltage characteristic of the GaAs MOS capacitor with TaYON gate dielectric (Y content = 27.6%) proposed in this work with the cross sectional structure and dielectric surface morphology as insets.     

Configuration Design Sensitivity Analysis of Kinematic Responses of Mechanical Systems∗

Abstract

A continuum-based configuration design sensitivity analysis method is presented for kinematically driven mechanical systems. Configuration design variable for mechanical systems are defined. The 3-1-3 Euler angle is used as the orientation design variable. The reassembly process for a mechanical system after a configuration design change is eliminated by imposing kinematic admissibility conditions of the velocity field. The direct differentiation method is used to derive design sensitivity equations. Numerical examples are presented to demonstrate the validity and effectiveness of the proposed method.     

ZnO–SnO2 branch–stem nanowires based on a two-step process: Synthesis and sensing capability

ZnO–SnO₂ branch–stem nanostructures were realized on a basis of a two-step process. In step 1, SnO₂-stem nanowires were synthesized. In step 2, ZnO-branch nanowires were successfully grown on the SnO₂-stem nanowires through a simple evaporation technique. We have pre-deposited thin Au layers on the surface of SnO₂ nanowire stems and subsequently evaporated Zn powders on the nanowires. The ZnO branches, which sprouted from the SnO₂ stems, had diameters in a range of 30–35 nm. As-synthesized branches were of single crystalline hexagonal ZnO structures. Since the branch tips were comprised of Au-containing nanoparticles, the Au-catalyzed vapor–liquid–solid growth mechanism was more likely to control the growth process of the ZnO branches. To test a potential use of ZnO–SnO₂ branch–stem nanostructures in chemical gas sensors, their sensing performances with respect to NO₂ gas were investigated, showing the promising potential in chemical gas sensors.