On-line coupling of capillary isoelectric focusing with transient isotachophoresis-zone electrophoresis: a two-dimensional separation system for proteomics

A microdialysis junction is employed as the interface for on-line coupling of capillary isoelectric focusing with transient isotachophoresis-zone electrophoresis in a two-dimensional separation system. Capillary isoelectric focusing not only provides high-resolution separation of tryptic peptides based on their differences in isoelectric point, but also potentially allows the analysis of low-abundance proteins with a typical concentration factor of 50-100 times. Carrier ampholytes, employed for the creation of a pH gradient during focusing, are further utilized as the leading electrolyte in the second separation dimension, transient isotachophoresis-zone electrophoresis. Many peptides which have the same isoelectric point would most likely have different charge-to-mass ratios, and thus different electrophoretic mobilities in zone electrophoresis. Two-dimensional separation of proteolytic peptides is demonstrated using standard proteins, including cytochrome c, ribonuclease A, and carbonic anhydrase II. The maximum peak capacity is estimated to be around approximately 1600 and can be significantly increased by simply increasing the capillary column length and manipulating the range of pH gradient in isoelectric focusing. In addition to enhanced separation efficiency and resolution, this two-dimensional electrokinetic separation system permits sensitive and comprehensive analysis of peptide fragments, especially when integrated with electrospray ionization mass spectrometry for peptide/protein identification.     

Enzyme-linked immunosorbent assay for the determination of 20(S)-protopanaxatriol

A highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) method has been developed for the determination of 20(S)-protopanaxatriol (PPT), one of the major aglycones of dammarane-type ginseng saponins. Polyclonal antibodies raised against ginsenoside F₁ (GF₁)-bovine serum albumin showed high reactivities to PPT and GF₁, whereas they exhibited minor or even no cross-reactivities to other ginsenosides and protopanaxadiol (0.19%). The working range of this method extends from 50 pg ml⁻¹ to 20 ng ml⁻¹ of PPT. The assay reported here has been validated against an HPLC technique using PPT-containing samples and was shown to correlate closely (γ=0.993). This ELISA could be a useful tool for the determination of PPT contained in biological fluids and plant materials.     

Nucleation and growth mechanism of Pd/Pt bimetallic clusters in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles as studied by in situ X-ray absorption spectroscopy

We report in situ X-ray absorption spectroscopy (XAS) investigations on the formation of palladium-platinum (Pd/Pt) bimetallic clusters at the early stage within the water-in-oil microemulsion system of water/AOT/n-heptane. The reduction of palladium and platinum ions and the formation of corresponding clusters are monitored as a function of dosage of reducing agent, hydrazine (N(2)H(5)OH). Upon successive addition of the reducing agent, hydrazine (N(2)H(5)OH), five distinguishable steps are observed in the formation process of Pd/Pt clusters at the early stage. Both in situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis for both the Pd K-edge and Pt L(III)-edge revealed the formation of Pd/Pt bimetallic clusters. A corresponding structural model is proposed for each step to provide a detailed insight into the nucleation and growth mechanism of Pd/Pt bimetallic clusters. We also discussed the atomic distribution of Pd and Pt atoms in Pd/Pt bimetallic clusters based on the calculated XAS structural parameters.     

Temperature and Oxygen Partial Pressure Dependences of the Surface Tension of Liquid Sn–Ag and Sn–Cu Lead-free Solder Alloys

Temperature dependence of the surface tension of liquid Sn–Ag and Sn–Cu base lead-free solder alloys and oxygen partial pressure dependence of liquid Sn–Ag alloy were evaluated using the experimental data obtained, respectively, by the constrained drop method and the sessile drop method in the previous studies [1, 2]. The temperature dependences of the surface tension have maximum positive values when the mol fraction of Ag and Cu is about 0.7, while those for pure liquid Sn, Ag, and Cu have negative values. The calculated values based on Butler’s equations were found to be in reasonable agreement with those of the experimental data. The oxygen partial pressure dependences of the surface tension of liquid Sn–Ag alloys at 1253 K have a minimum value when the mol fraction of Ag is about 0.9 and the oxygen partial pressure is less than about 10⁻¹³ atm. From this, it is considered that the oxygen adsorption increased by adding Ag to Sn when the mol fraction of Ag is less than 0.9.     

Adiabatic squeezing of molecular wave packets by laser pulses

Strong pulse sequences can be used to control the position and width of the molecular wave packet. In this paper we propose a new scheme to maximally compress the wave packet in a quasistatic way by freezing it at a peculiar adiabatic potential shaped by two laser pulses. The dynamic principles of the scheme and the characteristic effect of the different control parameters are presented and analyzed. We use two different molecular models, electronic potentials modeled by harmonic oscillators, with the same force constants, and the Na(2) dimer, to show the typical yield that can be obtained in compressing the initial (minimum width) molecular wave function.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Unique Fluxional Behavior. Synthesis, Structure, and Properties of Novel (Diamine)platinum(II) Complexes of 9-Fluorenylidene- and Benzhydrylidenemalonate Ligands

New (diamine)platinum(II) complexes A(2)PtX(2) (A(2) = trans-(+/-)-1,2-diaminocyclohexane (DACH), tetrahydro-4H-pyran-4,4-diylbis(methylamine)(THPDMA); X(2) = 9-fluorenylidenemalonate(FM), benzhydrylidenemalonate(BHM)) have been synthesized and characterized by means of multinuclear NMR spectroscopy and X-ray analysis. (DACH)Pt(FM) crystallizes in space group P2(1)/c with eight formula units in a cell of dimensions a = 20.071(7) ?, b = 12.717(3) ?, c = 24.512(6) ?, beta = 103.25(2) degrees, and V = 6090(3) ?.(3) (DACH)Pt(BHM) crystallizes in space group P&onemacr; with four molecular units in a cell of dimensions a = 11.048(3) ?, b = 13.639(3) ?, c = 14.043(6) ?, alpha = 90.17(3) degrees, beta = 91.31(4) degrees, gamma = 89.98(3) degrees, and V = 2116(1) ?(3). The platinum atom in both complexes adopts a typical square planar arrangement with two nitrogen atoms in cis position. The 9-fluorenylidene and benzhydrylidene groups of the amine ligands chelated to platinum are strikingly bent up by 88.8(3) and 80.8(2) degrees, respectively, from the platinum square plane in the solid state. Variable temperature (1)H NMR spectra of the title complexes in dimethyl sulfoxide solution reveals that the amine proton resonances are sensitive to the fluxional motion of the remote arylidene groups, and suggests that interconversion occurs between two "bent-up" and "bent-down" forms. The prominent difference between the FM and BHM complexes is observed in solution, due to the presence or absence of the angle constraint of the anionic coligands.     

Angular polycyclic thiophenes containing two thiophene rings. I

We describe the synthesis of thieno[2,3-c]dibenzothiophene ( 6 ), thieno[3,2-c]dibenzothiophene ( 10 ), thieno-[3,2-a]dibenzothiophene ( 14 ), thieno[2,3-a]dibenzothiophene ( 16 ), benzo[1,2-b:4,3-b]bisbenzo[b]thiophene ( 18 ), benzo[1,2--6:3,4-b]bisbenzo[b]thiophene ( 20 ), benzo[2,1--6:3,4-b]bisbenzo[b]thiophene ( 22 ), benzo[1,2-b:3,4-g]bisbenzo[b]thiophene ( 27 ), benzo[1,2-b:4,3-e]bisbenzo[b]thiophene ( 29 ), benzo[2,1--6:3,4-g]bisbenzo[b]thiophene ( 36 ), benzo[2,1--6:4,3-e]bisbenzo[b]thiophene ( 38 ), benzo[1,2--6:4,3-g]bisbenzo[b]thiophene ( 41 ), benzo[1,2-b:4,5-g]bisbenzo[b]thiophene ( 42 ), benzo[1,2-b:3,4-e]bisbenzo[b]thiophene ( 44 ) and benzo-[1,2-b:5,4-e]bisbenzo[b]thiophene ( 45 ).     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Fe-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and Grignard reagents

A highly chemoselective iron-catalyzed three-component dicarbofunctionalization of unactivated olefins with alkyl halides (iodides and bromides) and sp²-hybridized Grignard reagents is reported. The reaction operates under fast turnover frequency and tolerates a diverse range of sp²-hybridized nucleophiles (electron-rich and electron-deficient (hetero)aryl and alkenyl Grignard reagents), alkyl halides (tertiary alkyl iodides/bromides and perfluorinated bromides), and unactivated olefins bearing diverse functional groups including tethered alkenes, ethers, protected alcohols, aldehydes, and amines to yield the desired 1,2-alkylarylated products with high regiocontrol. Further, we demonstrate that this protocol is amenable for the synthesis of new (hetero)carbocycles including tetrahydrofurans and pyrrolidines via a three-component radical cascade cyclization/arylation that forges three new C–C bonds.

A highly selective iron-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and sp²-hybridized Grignard reagents is reported.