Simultaneous determination of iron and aluminium by differential kinetic spectrophotometric method and chemometrics

A differential kinetic spectrophotometric method was researched and developed for the simultaneous determination of iron and aluminium in food samples. It was based on the direct reaction kinetics and spectrophotometry of these two metal ions with Chrome Azurol S (CAS) in ethylenediamine-hydrochloric acid buffer (pH 6.3). The results were interpreted with the use of chemometrics. The kinetic runs and the visible spectra of the complex formation reaction were studied between 540 and 750 nm every 30 s over a total period of 285 s. A set of synthetic metal mixture samples was used to build calibrations models. These were based on the spectral and kinetic two-way data matrices, which were processed separately by the radial basis function-artificial neural network (global RBF-ANN) method. The prediction performance of these models was poorer than that from the combined kinetic-spectral three-way array, which was similarly processed by the same method (% relative prediction error (RPE_T) = 5.6). These results demonstrate that improved predictions can be obtained from the data array, which has more information, and that appropriate chemometrics methods can enhance analytical performance of simple techniques such as spectrophotometry.Other chemometrics models were then applied: N-way partial least squares (NPLS), parallel factor analysis (PARAFAC), back propagation-artificial neural network (BP-ANN), single radial basis function-artificial neural network (RBF-ANN), and principal component neural network (PC-RBF-ANN). There was no substantial difference between the methods with the overall %RPE_T range being 5.0-5.8. These two values corresponded to the NPLS and BP-ANN models, respectively. The proposed method was applied for the determination of iron and aluminium in some commercial food samples with satisfactory results.     

Synthesis and surface properties of new semi-fluorinated sulfobetaines potentially usable for 2D-electrophoresis

New semi-fluorinated amidosulfobetaines, homologs of hydrocarbon amidosulfobetaines (ASB) commonly used in two-dimensional gel electrophoresis (2DE), were prepared in three steps from 2-F-alkylethyl iodide or F-alkyl iodide. Their synthesis was described and their air-water interface properties were investigated and compared with their perhydrogenated counterpart properties. The influence of the relative lengths of the perfluorinated and hydocarbonated moieties was discussed. 2DE of a rat testicular membrane fraction was performed comparatively using one of these fluorinated sulfobetaines and its hydrocarbon homolog; these preliminary results showed the great potential of the semi-fluorinated sulfobetaines in proteomic analysis.     

Precise and accurate quantitative C NMR with reduced experimental time

In order to detect small variations in ¹³C isotopomers concentrations, high sensitivity, accuracy and precision have to be achieved. To assess such criteria, when using ¹³C NMR, ¹³C bi-labelled ethanol has been proposed as a molecular probe. Advantage has been taken of the pre-established structural relationship between the peak areas of the ¹³C NMR spectrum of this molecule, i.e. the ratio of signal areas is set to a fixed value. It is shown that the quality performance, required by quantitative ¹³C NMR spectroscopy, is not affected by a large reduction of the repetition delay using relaxation reagents.     

Sensing the chirality of Dawson lanthanide polyoxometalates [alpha1-LnP2W17O61]7- by multinuclear NMR spectroscopy

Lanthanide complexes of the chiral Dawson phosphotungstate [alpha(1)-P(2)W(17)O(61)](10-) were used to study the formation of diastereomers with optically pure organic ligands. The present work started with the full assignment of the (183)W NMR spectra of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) at different temperatures and concentrations, which allowed the structure of the dimerized form in aqueous solution to be established. Different enantiopure amino acids and phosphonic acids were screened as ligands. Both types allowed chiral differentiation by multinuclear NMR spectroscopy under fast-exchange conditions. Functional groups with a good affinity for the oxo framework of the polyoxometalate were identified, and maps of the interactions between L-serine and N-phosphonomethyl-L-proline with [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) were established. This demonstrates the power of (183)W NMR spectroscopy to elucidate the molecular recognition of inorganic molecules by organic compounds. N-Phosphonomethyl-L-proline appears to be a convenient ligand to promote separation of the diastereomers and ultimately resolution of the enantiomers of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-).     

The 2‐Cyano‐2,2‐dimethylethanimine‐N‐oxymethyl Group for the 2′‐Hydroxyl Protection of Ribonucleosides in the Solid‐Phase Synthesis of RNA Sequences

The reaction of 2‐cyano‐2‐methyl propanal with 2′‐O‐aminooxymethylribonucleosides leads to stable and yet reversible 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl)ribonucleosides. Following N‐protection of the nucleobases, 5′‐dimethoxytritylation and 3′‐phosphitylation, the resulting 2′‐protected ribonucleoside phosphoramidite monomers are employed in the solid‐phase synthesis of three chimeric RNA sequences, each differing in their ratios of purine/pyrimidine. When the activation of phosphoramidite monomers is performed in the presence of 5‐benzylthio‐1H‐tetrazole, coupling efficiencies averaging 99 % are obtained within 180 s. Upon completion of the RNA‐chain assemblies, removal of the nucleobase and phosphate protecting groups and release of the sequences from the solid support are carried out under standard basic conditions, whereas the cleavage of 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl) protective groups is effected (without releasing RNA alkylating side‐products) by treatment with tetra‐n‐butylammonium fluoride (0.5 m) in dry DMSO over a period of 24–48 h at 55 °C. Characterization of the fully deprotected RNA sequences by polyacrylamide gel electrophoresis (PAGE), enzymatic hydrolysis, and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry confirmed the identity and quality of these sequences. Thus, the use of 2′‐O‐aminooxymethylribonucleosides in the design of new 2′‐hydroxyl protecting groups is a powerful approach to the development of a straightforward, efficient, and cost‐effective method for the chemical synthesis of high‐quality RNA sequences in the framework of RNA interference applications.     

Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Determination of Pesticide Ethion by Linear Sweep Stripping Voltammetry

IntroductionOrganophosphorus pesticides( OPPs) are widelyused in agriculture as insecticides, but they are foundto contaminate agricultural products such as fruits andvegetables to variable extents. Because of their toxicproperties[1,2]and the potential r…     

Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

An efficient synthesis of new thiazolopyrimidinones under microwave irradiation

7‐Chloromethyl‐6‐nitro‐5H‐thiazolo[3,2‐a]pyrimidin‐5‐one ( 2 ) is obtained by cyclocondensation of 2‐aminothiazole with ethyl 4‐chloroacetoacetate. This product was shown to react with various nitronate or malonate anions under microwave irradiation to give potentially bioactive 6‐nitro‐5H‐thiazolo[3,2‐a]pyrimidin‐5‐ones. Extension to other anions centered on S atom allows for the generalization this synthetic procedure.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.