Facile generation of platinum(IV) compounds with mixed labile moieties. Hydrogen peroxide oxidation of platinum(II) to platinum(IV) compounds

Hydrogen peroxide oxidation of platinum(II) compounds containing labile groups such as Cl, OH, and alkene moieties has been carried out and the products characterized. The reactions of [Pt^II (X)₂ (N–N)] (X = Cl, OH, X₂ = isopropylidenemalorate (ipm); N–N 2,2-dimethyl-1,3-propanediamine [(dmpda), N-isopropyl-1,3-propanediamine (ippda)] with hydrogen peroxide in an appropriate solvent at room temperature affords [Pt^IV (OH)(Y)(X)₂(N–N)] (Y = OH, OCH₃). The crystal structures of [Pt^IV(OH)(OCH₃)(Cl)₂(dmpda)]·2H₂O (P-1 bar, a = 6.339(2) Å , b = 9.861(1) Å, c = 11.561(1) Å, a = 92.078(9)°, β = 104.78(1)°, γ=100.54(1)°, V = 684.3(2) ų, Z = 2R = 0.0503) and [Pt^IV(OH)₂(ipm)(ippda)]·3H₂O (C 2/c, a = 27.275(6) Å, b=6.954(2) Å, c = 22.331(4) Å, β = 118.30(2)°, V = 3729(2) ų, Z = 8, R = 0.0345) have been solved and refined. The local geometry around the platinum(IV) atom approximates to a typical octahedral arrangement with two added groups (OH and OCH₃; OH and OH) in a transposition. The platinum(IV) compounds with potential labile moieties may be important intermediate species for further reactions.     

Deuterium relaxation time ofα-d-tryptophan included in cyclodextrin host molecules

Deuterium relaxation times ofd- andl--d-tryptophan included in -cyclodextrin derivatives were directly measured by deuterium NMR spectroscopy. The results showed that the molecular motion of the tryptophan molecule was strongly restricted even in the cavity of unmodified -cyclodextrin and the additional recognition groupings — ammonium and carboxylate — on -cyclodextrin did not affect the molecular motion of tryptophan, though the association constants were significantly enhanced.Deceased on March 22, 1987.     

Thermal characterization and thermal degradation of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) synthesized by vinyl addition polymerization

The thermal properties and degradation behaviors of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) (PNB-dialkyl esters) (alkyl = Me (PNB-Me), Et (PNB-Et), Pr (PNB-Pr), and Bu (PNB-Bu)) were investigated by thermogravimetric analysis (TGA) in dynamic conditions and by infrared (IR) spectroscopy. The PNB-dialkyl esters show good thermal stability up to 350 °C, and the thermal stability decreases in the order Me > Et > Pr > Bu with the increase in size of side chain. The effect of side-chain size on the thermal degradation behaviors of PNB-dialkyl esters is evidenced by one-step thermal degradation profile for PNB-Me while two-step thermal degradation profile for PNB-Et, PNB-Pr, and PNB-Bu. Transformation is deduced to undergo β-hydrogen elimination and formation of anhydride group in the first stage of thermal degradation reaction according to TGA and IR results for PNB-Et, PNB-Pr, and PNB-Bu. The apparent activation energy and thermal degradation model of PNB-dialkyl esters are estimated by means of Ozawa-Flynn-wall method and Phadnis-Deshpande method, respectively.     

Clinical significance of molecular genetic changes in sporadic invasive pituitary adenomas

Several molecular and genetic changes have been found in pituitary adenomas. We looked for correlations between these changes and the degree of invasiveness of the tumors. The invasiveness of 11 pituitary adenomas was graded by Hardy classification. We examined the retinoblastoma gene (RB1.20 on chromosome 13q) and the region around the MEN1 locus (chromosome 11q13.1-5) for loss of heterozygosity. Also examined are p53 mutations using single strain conformation polymorphism, p53 protein overexpression using immuno cytochemistry, homozygous deletions of p15 and p16 by polymerase chain reaction, and cellular proliferative activity using MIB-1 antibody. Six tumors (54.5%) had an LOH at either RB1.20 or the MEN1 locus. LOHs were found more frequently in Grade 4 and stage E tumors (72% and 67%) than in Grade 3 and stage D tumors (25% and 40%). However, no mutation or overexpression of p53 was found. No homozygous deletions of p15 or p16 were identified. The cell proliferative index ranged from 0 to 3%. LOH at 11q13 and 13q may be valuable in predicting the invasiveness of pituitary adenomas.     

Idealized collision model for reactive scattering: Energy dependence of the cross section for CH3I + K → CH3 + Kl

The energy and temperature dependence of the reaction cross section for CH₃I + K → CH₃ + KI have been calculated using the reaction probability obtained from the idealized model of collinear, impulsive interaction between the atoms K and I and between the group CH₃ and I. Calculated values of the cross section agree very closely with the postmaximum data by Gersh and Berastein.     

Improved expression by cytomegalovirus promoter/enhancer and behavior of vascular endothelial growth factor gene after myocardial injection of naked DNA

Direct injection of the vascular endothelial growth factor (VEGF) gene plasmid DNA into the myocardium was shown to induce development of new blood vessels to increase the circulation in the heart of patients with coronary artery diseases. However, such angiogenic gene therapy (via naked DNA) was limited by low level of gene expression. Furthermore, the temporal and spatial characteristics of VEGF gene transfer in the heart are not known. In this study, we demonstrated that a plasmid vector, containing the human cytomegalovirus immediate early (HCMV IE) promoter and enhancer, induces greater expression of gene in the rat heart monitored by gene fused to the chloramphenicol acetyl transferase (CAT) reporter, than four different viral and cellular promoters. Interestingly, expression of VEGF121 protein showed an earlier peak, a shorter duration, and a wider distribution than that of CAT only. Therefore, a plasmid vector with an HCMV IE promoter/enhancer provides clear advantages over other previously developed plasmids. Furthermore, expression profile of VEGF121 gene may provide useful information in the design of angiogenic gene therapy in the heart.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Carbohydrate chips for studying high-throughput carbohydrate-protein interactions

Carbohydrate-protein interactions play important biological roles in living organisms. For the most part, biophysical and biochemical methods have been used for studying these biomolecular interactions. Less attention has been given to the development of high-throughput methods to elucidate recognition events between carbohydrates and proteins. In the current effort to develop a novel high-throughput tool for monitoring carbohydrate-protein interactions, we prepared carbohydrate microarrays by immobilizing maleimide-linked carbohydrates on thiol-derivatized glass slides and carried out lectin binding experiments by using these microarrays. The results showed that carbohydrates with different structural features selectively bound to the corresponding lectins with relative binding affinities that correlated with those obtained from solution-based assays. In addition, binding affinities of lectins to carbohydrates were also quantitatively analyzed by determining IC(50) values of soluble carbohydrates with the carbohydrate microarrays. To fabricate carbohydrate chips that contained more diverse carbohydrate probes, solution-phase parallel and enzymatic glycosylations were performed. Three model disaccharides were in parallel synthesized in solution-phase and used as carbohydrate probes for the fabrication of carbohydrate chips. Three enzymatic glycosylations on glass slides were consecutively performed to generate carbohydrate microarrays that contained the complex oligosaccharide, sialyl Le(x). Overall, these works demonstrated that carbohydrate chips could be efficiently prepared by covalent immobilization of maleimide-linked carbohydrates on the thiol-coated glass slides and applied for the high-throughput analyses of carbohydrate-protein interactions.     

Irreversible and Reversible Deactivation of Bilirubin Oxidase by Urate

Oxygen is electroreduced to water on a carbon cathode coated with wired bilirubin oxidase in a pH 7.4 0.15 M NaCl phosphate buffer solution at 37 °C at much lesser polarization than it is on a pure platinum cathode in 0.5 M H₂SO₄. While the wired bilirubin oxidase cathode operates for over a week in the aerated or oxygenated buffer solution, it is degraded rapidly when in serum. We reported earlier that in the presence of O₂ an intermediate product of the electrooxidation of urate, which is a normal serum component, irreversibly damages the wired bilirubin oxidase and also reported that the electrocatalyst is irreversibly damaged, in the absence of urate, when it is brought, by disconnecting the electrode, to the O₂/H₂O half cell potential at pH 7.4. Here we report that a) dissolved bilirubin oxidase is irreversibly and rapidly damaged by urate in the presence of O₂; and b) that the immobilized wired bilirubin oxidase electrocatalyst is not only irreversibly deactivated by urate in the presence of O₂ in a few hours, but is initially reversibly deactivated, in 1 min or less, by the urate in the presence of O₂.     

Cyclic vinylogous triflate hemiacetals as new surrogates for alkynyl aldehydes

Cyclic vinylogous triflate hemiacetals can serve as ‘synthetic equivalents’ for alkynyl aldehydes: treatment of a vinylogous triflate hemiacetal with excess amounts of Grignard reagents produces acyclic alkynyl alcohols in good to high yields. This transformation likely involves the Grob-type C-C bond cleaving fragmentation to form the alkynyl aldehyde in situ. Subsequent nucleophilic attack of the Grignard reagent furnishes secondary alkynols. Vinylogous triflate hemiacetals are easily prepared by DIBALH reduction of vinylogous acyl triflates, which are derived from cyclic 1,3-diketones.