Optoelectronic and microwave transmission characteristics of indium solder bumps for low-temperature flip-chip applications

This paper describes low-temperature flip-chip bonding for both optical interconnect and microwave applications. Vertical-cavity surface-emitting laser (VCSEL) arrays were flip-chip bonded onto a fused silica substrate to investigate the optoelectronic characteristics. To achieve low-temperature flip-chip bonding, indium solder bumps were used, which had a low melting temperature of 156.7/spl deg/C. The current-voltage (I-V) and light-current (L-I) characteristics of the flip-chip bonded VCSEL arrays were improved by Ag coating on the indium bump. The I-V and L-I curves indicate that optical and electrical performances of Ag-coated indium bumps are superior to those of uncoated indium solder bumps. The microwave characteristics of the solder bumps were investigated by using a flip-chip-bonded coplanar waveguide (CPW) structure and by measuring the scattering parameter with an on-wafer probe station for the frequency range up to 40 GHz. The indium solder bumps, either with or without the Ag coating, provided good microwave characteristics and retained the original characteristic of the CPW signal lines without degradation of the insertion and return losses by the solder bumps.     

Dual-wavelength cascaded Raman fibre laser

Dual-wavelength lasing at 1480 and 1500 nm has been demonstrated from a cascaded Raman fibre laser with a WDM coupler and two pairs of Bragg gratings. Intensity-adjustable, wavelength-tunable laser operation was achieved by tensile stress wavelength tuning of the gratings     

Identification of New Non-BBB Permeable Tryptophan Hydroxylase Inhibitors for Treating Obesity and Fatty Liver Disease

Serotonin (5-hydroxytryptophan) is a hormone that regulates emotions in the central nervous system. However, serotonin in the peripheral system is associated with obesity and fatty liver disease. Because serotonin cannot cross the blood-brain barrier (BBB), we focused on identifying new tryptophan hydroxylase type I (TPH1) inhibitors that act only in peripheral tissues for treating obesity and fatty liver disease without affecting the central nervous system. Structural optimization inspired by para-chlorophenylalanine (pCPA) resulted in the identification of a series of oxyphenylalanine and heterocyclic phenylalanine derivatives as TPH1 inhibitors. Among these compounds, compound 18i with an IC₅₀ value of 37 nM was the most active in vitro. Additionally, compound 18i showed good liver microsomal stability and did not significantly inhibit CYP and Herg. Furthermore, this TPH1 inhibitor was able to actively interact with the peripheral system without penetrating the BBB. Compound 18i and its prodrug reduced body weight gain in mammals and decreased in vivo fat accumulation.     

High-Efficiency Power Amplifier Using Novel Dynamic Bias Switching

A novel bias-switching scheme for a high-efficiency power amplifier is proposed. Two voltage levels for the drain bias of the RF power amplifier are generated using a combination of a class E dc/ac inverter and a class E rectifier with offset voltage. When signal peaks occur, the output of the class E dc/ac inverter is rectified and the rectified dc is added to the offset voltage by the class E rectifier, which boosts the drain bias of the RF power amplifier. Except during peaks, the drain bias of the RF power amplifier is connected to the offset voltage directly. Since the efficiency when there are no peaks is very high due to the direct connection between the offset voltage and drain bias, the overall efficiency of the RF power amplifier can be improved dramatically in high peak-to-average power ratio (PAPR) systems. The measured results show that the drain bias of the RF power amplifier is boosted up to approximately 1.8 times the offset voltage when the RF peaks generate. The overall efficiency of the proposed bias-switching amplifier is improved by 62% compared to that of the fixed bias amplifier in high PAPR systems     

Modular Layer‐by‐Layer Assembly of Polyelectrolytes,Nanoparticles, and Molecular Catalysts into Solar‐to‐Chemical Energy Conversion Devices

The design and fabrication of solar‐to‐chemical energy conversion devices are enabled through interweaving multiple components with various morphologies and unique functions using a versatile layer‐by‐layer assembly method. Cationic and anionic polyelectrolytes are used as an electrostatic adhesive to assemble the following functional materials: plasmonic Ag nanoparticles for improved light harvesting, upconversion nanoparticles for utilization of near‐infrared light, and polyoxometalate water oxidation catalysts for enhanced catalytic activity. Polyelectrolytes also have an additional function of passivating the surface recombination centers of the underlying photoelectrode. These functional components are precisely assembled on a model photoanode (e.g., Fe₂O₃ and BiVO₄) in a desired order and various combinations without degradation of their intrinsic properties. As a result, the performance of water oxidation photoanodes is synergistically enhanced. This study can enable the design and fabrication of novel solar‐to‐chemical energy conversion devices.     

Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support

Stage acoustics is an important characteristic for concert halls, both for the acoustic quality on stage and for the audience. However, relatively little research has been conducted into the question. This study was based on the investigation of an actual concert hall stage, that of the Seoul Arts Center Concert Hall in Korea. The stage acoustics was evaluated in the actual hall, and with two models: a 1:25 scale model and a computer model. The study was based on the stage support parameter ST1 proposed by Gade as a measure of support for individual performers [Acustica 65, 193-203 (1989)]. The variation of support was measured on the empty stage of the actual hall and in the two models. The effect of musicians on stage, the effect of moving the orchestra, the effect of ceiling height and of stage-wall profile were also investigated. Conclusions are drawn both relating to the Seoul Concert Hall stage and stages in general.     

A micro/nanocasting method for replicating soft micro/nanosurface structures using a dynamic electrical field

We propose a new electric field-induced micro/nanocasting method to replicate soft patterns using micro/nanocasting techniques without pressure. The process uses an alternating current (AC) electrical field and rotation of one electrode, generating a dynamic electrical field that induces electrokinetic flow motion in a dielectric solution (polydimethylsilane, PDMS). We used a lotus leaf as a replication template and characterised the PDMS flow motion to observe the effects of various process parameters (e.g., electrical field strength, rotation speed of an electrode, and electrode shape). The unstable flow motion was significantly dependent on the processing parameters, especially the rotation speed of the electrode. Using the optimised processing conditions, the replication efficiency was about 88%. We believe that this method has potential for fabricating soft micro/nanosized structures.     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.