Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-Plated Carbon Fiber-Reinforced Phenolic Resin Matrix Composites

The electrolytic plating of metallic nickel on a carbon fiber surface has been carried out in order to improve the interfacial adhesion and the mechanical properties in carbon fiber/phenolic matrix composite systems. The surface and the mechanical interfacial properties of composites are characterized by X-ray photoelectron spectrometry (XPS), surface free energy, and the critical stress intensity factor (K(IC)). From the experimental results, it is clearly revealed that the oxygen functional groups and the metallic nickel on fibers largely affect the mechanical interfacial behavior of the composites, resulting in increased surface polarity, whereas the nitrogen functional groups have no effect. Also, a good correlation between surface oxygen functional groups and mechanical interfacial properties and between wettability and K(IC) is established and it is found that a 10 A m(-2) current density is the optimum condition for this system. Copyright 2001 Academic Press.     

An improved method for constructing a full-length enriched cDNA library using small amounts of total RNA as a starting material

We have developed an improved method for constructing a full-length cDNA library using small quantity of material by modifying the original oligo-capping method. In our devised method, total RNAs are used in sequential oligo-capping steps directly without preliminary mRNA purification. Using this method, we constructed full- length cDNA libraries from 100 mg of total RNA. These libraries contained 8x10(5) to 8x10(6) independent clones with average insert sizes of 2.0 kb. Moreover, the number of full-length cDNAs containing the translation initiation codon ATG in the constructed libraries was estimated to 60-70%. In addition, 54% of the known cDNAs had a longer 5' end than the corresponding genes in the public database. Our results show that the method can be effectively used to construct full-length enriched cDNA libraries, especially, if starting material is limited.     

Separation of 99Mo from a simulated fission product solution by precipitation with a-benzoinoxime

The formation property of Mo precipitate was investigated and improved the existing process was using H₂O₂ that acts as an interfering compound in a subsequent alumina adsorption process. The property of the Mo precipitate was investigated by using SEM, FTIR, TG-DTA, and XRD. The simulated solution consisted of 1M nitric acid containing seven elements (Mo, I, Ru, Zr, Ce, Nd, Sr) and their radioactive tracers. As a result, the precipitate was composed of the Mo precipitate and re-precipitated a-benzoinoxime which was added excessively for increasing the precipitation efficiency. It was confirmed that the Mo precipitate was formed by the reaction of two a-benzoinoxime molecules and one MoO₂ ²⁺. Molybdenum precipitate was dissolved in 0.4M NaOH solution within 5 minutes without H₂O₂. Hydrogen peroxide induced only the rapid dissolution of the a-benzoinoxime re-precipitate. Also, the dissolution method without H₂O₂ was favorable in the purification aspect because Zr and Ru were contained as a small fraction of 1.3% and 7.7%, respectively, in the dissolving solution.     

Improved expression by cytomegalovirus promoter/enhancer and behavior of vascular endothelial growth factor gene after myocardial injection of naked DNA

Direct injection of the vascular endothelial growth factor (VEGF) gene plasmid DNA into the myocardium was shown to induce development of new blood vessels to increase the circulation in the heart of patients with coronary artery diseases. However, such angiogenic gene therapy (via naked DNA) was limited by low level of gene expression. Furthermore, the temporal and spatial characteristics of VEGF gene transfer in the heart are not known. In this study, we demonstrated that a plasmid vector, containing the human cytomegalovirus immediate early (HCMV IE) promoter and enhancer, induces greater expression of gene in the rat heart monitored by gene fused to the chloramphenicol acetyl transferase (CAT) reporter, than four different viral and cellular promoters. Interestingly, expression of VEGF121 protein showed an earlier peak, a shorter duration, and a wider distribution than that of CAT only. Therefore, a plasmid vector with an HCMV IE promoter/enhancer provides clear advantages over other previously developed plasmids. Furthermore, expression profile of VEGF121 gene may provide useful information in the design of angiogenic gene therapy in the heart.     

Synthesis and structure of Li4Sr3Ge2N6: a new quaternary nitride containing Ge2N6 anions

A new Li-containing quaternary nitride, Li₄Sr₃Ge₂N₆, was obtained as single crystals from constituent elements in molten Na. It crystallizes in space group C2/m (No. 12) with a=6.1398(7) Å, b=10.021(1) Å, c=6.3130(7) Å, β=91.279(2)°, and Z=2. It contains the first example of isolated nitridogermanate anions of Ge₂N₆¹⁰⁻, which is also the first example of edge-sharing tetrahedral [GeN₄].     

Characterization of the short-chain branches in poly(vinyl chloride)s by γ irradiation of the reduced polymers

The volatile products from the γ irradiation of samples of poly(vinyl chloride) prepared under different conditions and reduced to the corresponding polyethylenes have been measured quantitatively and compared with those for low- and high-density polyethylenes and copolymers of ethylene with small amounts of α-olefins. The presence of methyl branches is clearly demonstrated and there is also evidence for ethyl and butyl branches, although these had not been considered significant in previous [¹³C] NMR studies. The method is shown to be extremely sensitive to small quantities of residual trialkyl tin hydride reductant occluded in, and possibly also reacted with, the polymer, and to residual chlorine (<0.5%). The yields of alkanes are higher than expected from the branch frequencies determined by i.r. and [¹³C] NMR and results for ethylene-α-olefin copolymers. This difference is apparently due to sensitisation of the radiation degradation by residual chlorine and reductant. Quantitative determinations of branch frequencies by the radiolytic method are unlikely to be obtained until these problems are overcome.     

Sphingosine mediates FTY720-induced apoptosis in LLC-PK1 cells

FTY720, a synthetic sphingoid base analog, was examined as a new sphingosine kinase inhibitor, which converts endogenous sphingosine into its phosphate form. With 20 microM of FTY720, sphingosine accumulated in the LLC-PK(1) cells in a time- and dose-dependent manner. The FTY720 treated cells showed a high concentration of fragmented DNA, a high caspase-3 like activity and TUNEL staining cells. It was also found that the sphingosine and sphinganine level increased in a time- and dose-dependent manner within 12 h after the FTY720 treatment. The sphingosine kinase activity was reduced by FTY720 as much as other sphingosine kinase inhibitors, N, N-dimethylsphingosine (DMS), dl-threo-dihydrosphingosine (DHS). The fragmented DNA content as a result of the 20 microM of FTY720 treatment and by 5 microM of the exogenously added BSA-sphingosine complex indicated typical apoptosis. Under similar conditions, the accumulated sphingosine concentration in all the cells was almost identical even though the sphingosine distribution inside the cells was somewhat different. These results indicate that the FTY720 induced apoptosis is associated with the inhibition of the sphingosine kinase activity and is strongly associated with the successive accumulation of sphingosine.     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.