The effect of mixing methods on the dispersion of carbon nanotubes during the solvent-free processing of multiwalled carbon nanotube/epoxy composites

Several solvent-free processing methods to disperse multiwalled carbon nanotubes (MWCNTs) in bisphenol F-based epoxy resin were investigated, including the use of a microfluidizer (MF), planetary shear mixer (PSM), ultrasonication (US) and combinations. The processed mixture was cured with diethyl toluene diamine. Three complimentary techniques were used to characterize the dispersion of the MWCNTs in cured composite samples: optical microscopy, micro Raman spectroscopy, and scanning electron microscopy (SEM). For sample MF + PSM, optical micrographs and Raman images showed reduced agglomeration and a homogeneous distribution of MWCNTs in the epoxy matrix. SEM analysis of fractured specimen after tensile testing revealed breakage of nanotubes along the fracture surface of the composite. A comparison of the MWCNT dispersion in the epoxy samples processed using different methods showed that a combination of MF and PSM processing yields a more homogeneous sample than the PSM or US + PSM processed samples. Mechanical testing of the composites showed about 15% improvement in the tensile strength of samples processed by the MF + PSM method over other methods. Thermogravimetric analysis (TGA) results showed a small decrease in the onset degradation temperature for poorly dispersed samples produced by PSM compared with the well-mixed samples (MF + PSM). These results strongly suggest that the MF + PSM processing method yield better-dispersed and stronger MWCNT/epoxy composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Effects of gemini surfactants on egg phosphatidylcholine bilayers in the fluid lamellar phase

The influence of 1,4-butanediamonium-N,N'-dialkyl-N,N,N',N'-tetramethyl dibromides (CmA, m = 7-16 is the number of alkyl carbons) on the egg yolk phosphatidylcholine (EYPC) bilayer thickness and lipid surface area at the bilayer-aqueous phase interface is studied using X-ray diffraction on fluid lamellar CmA + EYPC + H2O phases as a function of CmA:EYPC and H2O:EYPC molar ratios and the alkyl chain length m. At the constant CmA:EYPC = 0.4 and H2O:EYPC = 18 molar ratios, the CmA induced bilayer thickness decrease shows a minimum and the lipid surface area increase a maximum at the alkyl chain length m = 9. The obtained results are discussed in the context of a structural perturbation model of the cut-off effect in biological potencies of surfactants which occurs when increasing the alkyl substituent chain length above the critical value.     

Purification of recombinant green fluorescent protein by three-phase partitioning

The technique of three-phase partitioning (TPP) was used to purify the green fluorescent protein (GFP) in a single step. TPP uses a combination of ammonium sulphate and tert-butanol to precipitate proteins from their crude extracts. In the first round of TPP with 20% ammonium sulphate saturation at the ratio of crude to tert-butanol 1:1 (v/v), most of the GFP remains in the lower aqueous phase. When subjected to a second round of TPP with 60% ammonium sulphate saturation at the ratio of crude to tert-butanol 1:2 (v/v) gives 78% recovery of GFP with a 20-fold purification. The sodium dodecyl sulphate-polyacrylamide gel electrophoretic (SDS-PAGE) analysis of purified preparation shows single band. The fluorescence excitation and emission spectra agreed with values reported in literature.     

Time-resolved spectroscopic measurements of shock-wave induced decomposition in cyclotrimethylene trinitramine (RDX) crystals: anisotropic response

Plate impact experiments on the (210), (100), and (111) planes were performed to examine the role of crystalline anisotropy on the shock-induced decomposition of cyclotrimethylenetrinitramine (RDX) crystals. Time-resolved emission spectroscopy was used to probe the decomposition of single crystals shocked to peak stresses ranging between 7 and 20 GPa. Emission produced by decomposition intermediates was analyzed in terms of induction time to emission, emission intensity, and the emission spectra shapes as a function of stress and time. Utilizing these features, we found that the shock-induced decomposition of RDX crystals exhibits considerable anisotropy. Crystals shocked on the (210) and (100) planes were more sensitive to decomposition than crystals shocked on the (111) plane. The possible sources of the observed anisotropy are discussed with regard to the inelastic deformation mechanisms of shocked RDX. Our results suggest that, despite the anisotropy observed for shock initiation, decomposition pathways for all three orientations are similar.     

Preparation and characterization of hydroxypropyl-β-cyclodextrin inclusion complex of eugenol: differential pulse voltammetry and (1)H-NMR

The objective of present investigation was to improve the solubility of Eugenol by preparing the inclusion complex of Eugenol with hydroxypropyl-β-cyclodextrin (Hp-β-CD) and characterize the prepared complex by using NMR and differential pulse voltammetry (DPV). Phase solubility curve was plotted using Hp-β-CD in ranging from 0-40 mM of Hp-β-CD and found to be linear. Therefore, inclusion complex was prepared in equimolar ratio of Eugenol and Hp-β-CD by lyophilization method. Fourier transform infrared spectroscopy (FT-IR), (1)H-NMR and DPV were performed for Eugenol, Hp-β-CD and prepared inclusion complex of Eugenol. 2D (two dimensional) NMR was also performed for prepared inclusion complex. The proton of phenol moiety of Eugenol experienced a pronounced chemical shift variation in (1)H-NMR. The positive sign of the variation for proton in (1)H-NMR indicated that the proton was located near to an oxygen atom in the Hp-β-CD cavity and its magnitude showed a strong interaction between -OH proton of Eugenol and Hp-β-CD. 2D NMR confirms the interaction between phenolic group and hydrogen atoms of Hp-β-CD. A well defined anodic peak current corresponding to oxidation of Eugenol in non-encapsulated and Hp-β-CD-Eugenol inclusion complex in phosphate buffer (pH 6.8) was obtained at about 0.35 V and 0.40 V, respectively. The positive shift in oxidation potential indicated the formation of complex via hydrophobic interactions. The oxidant power of Eugenol was retained in complex form as indicated by DPV results. Thus, its oxidation dependent pharmacological property such as antimicrobial activity is not affected after complexation with Hp-β-CD. Thus, (1)H-NMR, 2D-NMR and DPV techniques can be used as valuable tools to determine the mechanism of complexation and state of electrochemical active drug in inclusion complex.     

The applicability of three-dimensional aromaticity in BiSn(n)- Zintl analogues

Three-dimensional aromaticity is shown to play a role in the stability of deltahedral Zintl clusters and here we examine the connection between aromaticity and stability. In order to gain further insight, we have studied Zintl analogs comprised of bismuth doped tin clusters with photoelectron spectroscopy and theoretical methods. To assign aromaticity, we examine the ring currents induced around the cage by using the nucleus independent chemical shift. In the current study, BiSn(4)(-) is a stable cluster and fits aromatic criteria, while BiSn(5)(-) is found to fit antiaromatic criteria and has reduced stability. The more stable clusters exhibit an aromatic character which originates from weakly interacting s-states and bonding orbitals parallel to the surface of the cluster, while nonbonding lone pairs perpendicular to the surface of the cluster account for antiaromaticity and reduced stability. The effect of three-dimensional aromaticity on the electronic structure does not result in degeneracies, so the resulting variations in stability are smaller than those seen in conventional aromaticity.     

An anionic, tetragonal copper(II) superoxide complex

Insight into copper-oxygen species proposed as intermediates in oxidation catalysis is provided by the identification of a Cu(II)-superoxide complex supported by a sterically hindered, pyridinedicarboxamide ligand. A tetragonal, end-on superoxide structure is proposed based on DFT calculations and UV-vis, NMR, EPR, and resonance Raman spectroscopy. The complex yields a trans-1,2-peroxodicopper(II) species upon reaction with [(tmpa)Cu(CH(3)CN)]OTf and, unlike other known Cu(II)-superoxide complexes, acts as a base rather than an electrophilic (H-atom abstracting) reagent in reactions with phenols.     

Chemical and Photochemical Water Oxidation Catalyzed by Mononuclear Ruthenium Complexes with a Negatively Charged Tridentate Ligand

Two mononuclear ruthenium complexes [RuL(pic)₃] ( 1 ) and [RuL(bpy)(pic)] ( 2 ) (H₂L=2,6‐pyridinedicarboxylic acid, pic=4‐picoline, bpy=2,2′‐bipyridine) have been synthesized and fully characterized. Both complexes could promote water oxidation chemically and photochemically. Compared with other known ruthenium‐based water oxidation catalysts using [Ce(NH₄)₂(NO₃)₆] (Ce^IV) as the oxidant in solution at pH 1.0, complex 1 is one of the most active catalysts yet reported with an initial rate of 0.23 turnover s^?1. Under acidic conditions, the equatorial 4‐picoline in complex 1 dissociates first. In addition, ligand exchange in 1 occurs when the Ru^III state is reached. Based on the above observations and MS measurements of the intermediates during water oxidation by 1 using Ce^IV as oxidant, [RuL(pic)₂(H₂O)]⁺ is proposed as the real water oxidation catalyst.     

Comparative evaluation of Dy(III) selective poly(vinyl) chloride based membrane electrodes of macrocyclic tetraimine Schiff's bases

Three different derivatives of macrocyclic tetraimine Schiff's base have been synthesized and explored as a neutral ionophores for preparing poly(vinyl chloride) based membrane sensors selective to Dy³⁺. The addition of sodium tetraphenyl borate and various plasticizers, viz., o-NPOE, DBP, DBBP, DOP and CN has been found to substantially improve the performance of the sensors. The best performance was obtained with the sensor no. 1 having membrane of Schiff's base (SL-1) with composition (w/w) SL-1 (4.5%): PVC (30.5%): o-NPOE (59.5%): NaTPB (5.5%). This sensor exhibits Nernstian response with slope 19.4 mV/decade of activity in the concentration range of  10⁻⁸ to 1.0 × 10⁻² M Dy³⁺, performs satisfactorily over wide pH range of (2.8-7.2) with a fast response time (10 s). The sensor was also found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of acetonitrile, methanol or ethanol. The proposed sensor can be used over a period of 1.5 months without significant drift in potentials. The sensor has been also utilized for the determination of Dy³⁺ level in different soil samples.