The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

Mössbauer studies on one-dimensional iron phthalocyanines

Summary Magnetic moments and⁵⁷Fe Mössbauer spectra at room temperature and at liquid nitrogen temperature of polynuclear ligand-bridged iron phthalocyanines, FePcL (L = pyrazine and 4,4-bipyridyl), are reported. The experimental data are in agreement with a pseudo-octahedral environment around the iron(II) cation. Partially oxidized derivatives, FePc(pz)I_0.26 and FePc(bipy)I_1.06 have been synthesized and their⁵⁷Fe Mössbauer spectra and magnetic moments within the same temperature range obtained. Oxidation is shown to be metal centred and the iodine is found to be in I^– form for FePc(pz)_0.26 and as both I^– and I ₃ ^– species for FePc(bipy)I_1.06. While the magnetic moment of FePc(pz) increases upon oxidation, the opposite occurs for FePc(bipy).     

Influence of rotation and isotope effects on the dynamics of the N((2)D)+H(2) reactive system and of its deuterated variants

Integral cross sections and thermal rate constants have been calculated for the N((2)D)+H(2) reaction and its isotopic variants N((2)D)+D(2) and the two-channel N((2)D)+HD by means of quasiclassical trajectory and statistical quantum-mechanical model methods on the latest ab initio potential-energy surface [T.-S. Ho et al., J. Chem. Phys. 119, 3063 (2003)]. The effect of rotational excitation of the diatom on the dynamics of these reactions has been investigated and interesting discrepancies between the classical and statistical model calculations have been found. Whereas a net effect of reagent rotation on reactivity is always observed in the classical calculations, only a very slight effect is observed in the case of the asymmetric N((2)D)+HD reaction for the statistical quantum-mechanical method. The thermal rate constants calculated on this Potential-Energy Surface using quasiclassical trajectory and statistical model methods are in good agreement with the experimental determinations, although the latter are somewhat larger. A reevaluation of the collinear barrier of the potential surface used in the present study seems timely. Further theoretical and experimental studies are needed for a full understanding of the dynamics of the title reaction.     

X-ray structure and variable temperature NMR spectra of [meso-triarylcorrolato]copper(III)

The diamagnetic square planar d(8) complexes [meso-arylcorrolato]copper(III) become paramagnetic upon warming, indicative of the equilibrium between the [corrolato]copper(III) and the [corrolato](+)* copper(II) forms of the complex. [meso-Triphenylcorrolato]copper(III) was structurally characterized and found to be saddled.     

Do solid surface potential barriers retard convoy peak electrons?

Using a coaxial cylindric electron spectrometer and an electrostatic ion energy analyzer in tandem, a direct measurement of the difference of the energy of convoy peak electron and the electron equivalent ion energy of protons emerging from the downstream surface of C, Au and Al foils is performed in the proton energy range from 60 to 250 keV. This measurement is made possible using the accepted evidence that for a gas target these energies are equal. It is found that also for the beam foil convoy peak electrons, within an experimental average uncertainty of about ±0.1 eV, there is no difference between these energies. If one accepts that the origin of convoy electrons is from inside the solid, the conclusion is that no retardation by the solid surface potential barrier, which is of the order of a few eV, is observed. This is attributed to the strong electron-ion Coulomb interaction which almost completely overshadows the force exerted on the electron by the field of the surface barrier.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.