Al-Cu-Fe系初生准晶相凝固过程的电子显微分析

采用包括金相（OM），粉末X射线衍射（XRD），扫描电子显微镜（SEM）观察和透射电子显微（TEM）分析等方法，研究了铸态Al592.Cu36.8Fe3.0Si1.0合金（700℃保温2．5h后水淬）的显微组织及相组成。发现铸锭中存在4种相：准晶I相，τ3相（或φ相），θ－Al2Cu相和η－AlCu相，凝固过程可描述为：初生晶是准晶Ⅰ相；在保温过程中发生包晶或共晶反应（L＋i→τ3(或φ）或L→τ3（或φ）＋i)形成的τ3相（或φ相），呈微畴结构；而剩余液体水淬形成θ－Al2Cu相和η－AlCu 相。     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

位移和速度反馈的数学模型及实现方法

本文提出了位移和速度同时反馈的数学模型 .并给出了位移和速度反馈的实现方法 ,该方法用传统的差动变压器实现了位移和速度的同时反馈     

Spectral Representation Theory for Dielectric Behavior of Nonspherical Cell Suspensions

Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, while the high-frequency one was independent of it. The cell shape effect was simulated by an ellipsoidal cell model but the comparison between theory and experiment was far from being satisfactory. Prompted by the discrepancy, we proposed the use of spectral representation to analyze more realistic cell models. We adopted a shell-spheroidal model to analyze the effects of the cell membrane. It is found that the dielectric property of the cell membrane has only a minor effect on the dispersion magnitude ratio and the characteristic frequency ratio. We further included the effect of rotation of dipole induced by an external electric field, and solved the dipole-rotation spheroidal model in the spectral representation.Good agreement between theory and experiment has been obtained.     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

心脏黏液瘤的超微结构研究

对8例心脏黏液瘤进行了临床病理总结，着重进行了超微结构的研究，结果表明黏液瘤细胞有4种超微结构表现：（1）原始间叶细胞；（2）纤维母细胞样；（3）肌纤维母细胞样；（4）上皮样。提出心脏黏液瘤细胞起源于原始间叶细胞，有纤维母细胞、肌及上皮样分化。并且提出瘤细胞参与黏液瘤基质的形成。     

双电极对双脉冲激光器结构分析

本文对双电极对双脉冲激光器的谐振腔结构进行了分析,结果表明采用双非稳腔和增大反射镜的曲率半径可分别获得单纵模和基横模输出。为使输出能量稳定,则双电极对的间距有一最小值的限制。     

一个基于运输规模经济的库存选址模型

介绍了一种新的配送中心(DC)选址模型,在该模型中考虑了一般库存和安全库存成本,同时把从供应商到DC的运输成本也结合进去综合考虑,运输成本是由固定成本加可变成本两部分组成,反映了运输规模经济.     

Topological Properties of Urban Public Traffic Networks in Chinese Top-Ten Biggest Cities

We investigate the topological characteristics of complex networks as exemplified by the urban public traffic network （UPTN） in Chinese top-ten biggest cities. It is found that the UPTNs have small world behaviour, by the examination of their topological parameters. The quantitative analysis of the transport efficiency of the UPTNs reveals their higher local efficiency El and lower global efficiency Eg, which coincide well with the status quo of those Chinese cities still at their developing stage. Furthermore, the topological properties of efficiency in the UPTNs are also examined, and the findings indicate that, on the one hand, the UPTNs show robustness to random attacks and frangibility to malicious attacks on a global scale; on the other hand, the interrelation between UPTN efficiency and network motifs deserves our attention. The motifs which interrelate the UPTN efficiency are always triangular-formed patterns, e.g. motifs ID 238, ID 174 and ID 102, etc.     

基于DFT插值的宽带波束形成器设计

本文提出一种基于DFT插值的宽带波束形成器设计方法。首先推导了具有频率不变波束图的连续线阵的灵敏度函数与离散线列阵加权系数之间的关系；接着给出了基于DFT插值的宽带波束形成器设计的两个步骤：（1）使用窄带波束形成器的设计方法计算在参考频率下基阵的加权系数；（2）根据参考频率下基阵的权系数与其它子带权系数之间的关系，利用DFT插值的方法求出其它子带的加权系数。最后，给出了一个设计实例说明本文方法的有效性。