冠醚共缩聚物的合成与性能（Ⅱ）

采用２，６－二羟甲基苯酚类化合物分别与单苯并冠醚（Ｂ１５ＣＳ、Ｂ１８Ｃ６）和Ｍ苯并冠醚（２Ｂ１８Ｃ６、２Ｂ２４Ｃ８、２Ｂ３０Ｃ１０）在酸催化下缩聚，合成了两个系列冠醚共缩聚物．这些聚合物Ｍ＝１２００—４５００，可溶于氯仿等溶剂，萃取性能和络合选择性均有所提高．作为树脂使用，动态吸附容量为０．０５—０．１５ｍｍｏｌ／ｇ，并有较好的色谱特性．     

高效液相色谱-质谱联用测定婴幼儿配方奶粉中的左旋肉碱

建立了婴幼儿配方奶粉中左旋肉碱含量的高效液相色谱-质谱联用测定方法。采用C4色谱柱(4.6mm×250 mm,5μm)进行分离,以甲醇-水(10∶90)为流动相,柱温25℃,流速1.0 mL.min-1,进样量为10μL,柱后分流比为1∶3,质谱采用多离子反应监测(MRM)方式进行检测,正离子模式,定量离子为m/z 162.2→103.1。在优化条件下,样品在10 min内完成分析,左旋肉碱在0.40～10.0 mg.L-1范围内线性关系良好(r=0.999 3)。方法的加标回收率为87%～106%,检出限(S/N=3)和定量下限(S/N=10)分别为39.0、116.9 ng。该方法操作简便、灵敏度高、重复性好,可用于婴幼儿配方奶粉中左旋肉碱的测定。     

Synthesis and Crystal Structure of a Novel Three-dimensional Cu(II) Compound {[Cu(2,2''-bipy)(C7H4O5S)(H2O)2]·(H2O}n

The title compound, {[Cu(2,2'-bipy)(C7H4O5S)(H2O)2](H2O}n (2,2'-bipy = 2,2'- bipyridine), was synthesized by the hydrothermal reaction of Cu(NO3)2(3H2O, 2,2'-bipyridine and 2-sulphobenzoic acid, and structurally characterized by single-crystal X-ray diffraction analysis. The crystal is of triclinic, space group P with a = 9.21(3), b = 10.17(3), c = 10.77(3) (A), α = 77.017(16), β = 89.80(8), γ = 68.46(7)°, V = 911(5) (A)3, Z = 2, (D/s)max = 0.001, Mr = 473.94, Dc = 1.728 g/cm3, μ(MoKα) = 1.365 mm-1, F(000) = 486, the final R = 0.0246 and wR = 0.0628 for 3809 observed reflections with I > 2σ(I). The mononuclear crystal structure extends into a two-dimensional net- work via hydrogen-bonding interactions and a three-dimensional framework is further formed by means of π-π stacking interactions.     

TRANSFORMATION OF CULTURED HUMAN FETAL GASTRIC FIBROBLASTS WITH PHYSICO-CHEMICAL AGENTS

Treatment of early passage human fetal gastric fibrohlasts with ultraviolet (UV) light and the chemical carcinogen ethyl nitrosourea (ENU) in succession resulted in an immortally growing cell line, named GTS 8502. The cells of this line display typical transformation characteristics, such as irregularly shaped nuclei, heteroploidization of karyotype and frequent appearance of heteromorphic chromosomes, the enhanced volume ratio of nucleus to cytoplasm, multinucleoli, appearance of microvilli on the surface of the cells and agglutination reaction to lectin concanavalin A. The transformants have high growing and mitotic indices and the ability of focus-formation on monolayers and anchorage independent growth in soft agar medium. Moreover, these cells induced turnouts in nude mice or in immunosuppressed new-born rats through heterotransplantation. The results of various methods including electromicroscopy and histochemical analyses indicate that GTS 8502 cells are of fibroblast origin.Our results thus indi     

Ca掺杂对EuFeO3的Fe离子的电子态的影响

利用固相反应合成了Eu_1-xCa_xFeO₃钙钛矿氧化物.XRD测量表明,在x≤0.6范围内为钙钛矿结构;室温下的⁵⁷FeMössbauer谱测试给出3个磁谱和1个顺磁双线谱;在3个磁谱中,1个为处于四配位的Fe离子,另外2个为处于八配位的Fe离子.XPS谱表明Fe_2p3/2的高结合能端出现与Fe离子配位状态相对应的肩峰.所有Fe离子都处于+3价态.     

合成方法对MCM-22分子筛的结构、性质及催化性能的影响

在水热条件下分别以动态法和静态法合成了高纯度和高结晶度的MCM-22分子筛.采用N2吸附、XRD、TEM和FTIR等方法研究了制备方法对分子筛的结构及性质的影响.结果表明,动态法合成的MCM-22比静态法合成的分子筛的晶粒小,酸量低.在丙酮一步法合成甲基异丁基酮反应中,静态条件下合成的MCM-22为载体的催化剂的丙酮转化率较高,这是由于该分子筛的酸量较高所致.而MIBK的选择性则呈相反趋势,这可能与动态条件下合成的分子筛粒径小、孔道短有关.     

XRF/EDTA滴定法测定钐铕钆富集物样品稀土总量

采用X射线荧光光谱(XRF)法测定钐铕钆富集物的平均摩尔质量;用EDTA滴定法测定钐铕钆富集物中的稀土总量。方法的标准偏差为0．13％,相对标准偏差为0．14％,所得结果与重量法结果基本一致。     

聚丙烯成核剂研究进展

聚丙烯材料被越来越多的应用于汽车领域、工程塑料等,聚丙烯性能的优化也成为工业界和学术界研究的热点问题。聚丙烯因其良好的机械性能、加工性能、价格低廉而备受关注,但其低温脆性大、热变形温度低、易收缩等缺点也制约了该类材料的发展和在某些领域的应用。对聚丙烯的改性关键是对其分子链规整度、球晶尺寸的调控,成核剂改性是聚丙烯改性中相对简单易行的方法。聚丙烯成核剂种类繁多,各俱特色,本文在综述了聚丙烯成核剂的基础上提出了新型聚丙烯改性成核剂,即大分子成核剂,并展望了大分子成核剂的发展前景。     

高质量NaNdF4六方棱柱纳米棒的水热形貌控制合成及发光性质

采用水热法在温和的条件下合成了具有规则外形的六方棱柱状NaNdF₄纳米棒。X射线衍射（XRD）分析表明：产物为纯六方相NaNdF₄,场发射扫描电镜（SEM）分析表明产物形貌为棱柱状纳米棒,长约为550nm,棒的端部呈规则六边形,边长约为85nm。高分辨透射电子显微镜（HRTEM）和选区电子衍射（SD）显示所得样品为良好的单晶。NaNdF₄晶体的生长动力学过程表明：螯合剂（EDTA-Na₂）与稀土金属离子间的螯合作用受pH值影响,导致成核速度变化,进而影响NaNdF₄纳米晶的最终尺寸和形貌。室温下的NaNdF₄纳米棒的发光峰位于红外光范围（λ=892,1058,和1342nm）,其最强发射峰位于1058nm,对应于Nd³⁺的⁴F_3/2→⁴I_11/2f-f跃迁。     

In vitro Degradation and Biocompatibility of Ca-P Coated Magnesium Alloy

Calcium-phosphate compounds(Ca-P) coating was prepared on an Mg-Al alloy(AZ60). Biodegradation of Ca-P coated magnesium alloy was evaluated in simulated body fluid(SBF) by examining the changes in magnesium ion concentration and pH value, which indicated that the Ca-P coating on magnesium alloy strongly affected the corrosion of magnesium alloy. Osteoblast MC3T3-E1 cells were utilized to investigate the cellular cytocompatibility. The cytocompatibility was measured by carrying out a series of tests, such as cholecystokinin-octapeptide(CCK-8) test, alkaline phosphatase activity(ALP) test, cellular morphology of hematoxylin-eosin(HE) staining and the induction of apoptosis. It was found that the cell function showed better in the Ca-P coated Mg-alloy extract than in the uncoated magnesium alloy extract. In summary, the results indicate that the Ca-P coating can improve the corrosion resistance of magnesium alloy and elevate cellular proliferation and differentiation of osteoblast MC3T3-E1 cells.