The Difference of Electronic Properties and the Effect of Hydrogen－bondofcis－and trans－Polyazomethine

ＴｈｅＤｉｆｆｅｒｅｎｃｅｏｆＥｌｅｃｔｒｏｎｉｃＰｒｏｐｅｒｔｉｅｓａｎｄｔｈｅＥｆｆｅｃｔｏｆＨｙｄｒｏｇｅｎ－ｂｏｎｄｏｆｃｉｓ－ａｎｄｔｒａｎｓ－ＰｏｌｙａｚｏｍｅｔｈｉｎｅＷＡＮＧＲｏｎｇ－ｓｈｕｎ，ＰＡＮＸｉｕ－ｍｅｉａｎｄＳＵＺｈｏｎｇ...     

N8H8链状异构体结构与稳定性的理论研究

采用密度泛函理论(DFT), 在B3LYP/6-311＋＋G(d,p)基组上计算得到了21种N₈H₈链状异构体, 并研究了这些异构体间可能的互变异构情况. 为了得到更为精确的能量信息, 计算了QCISD(T)/6-311G(d,p)基组水平上各物质的能量. 所得的21种异构体分为4类(4种类型链状化合物): A为直链, B有一个支链, C有2个支链, D有3个支链; D类只有一种, A类稳定构型2种, B类稳定构型12种, C类稳定构型6种; 相对稳定的分别为: B2-1构型, B2-3构型和C23-2构型. 我们研究发现N₈H₈链状异构体中含有明显N＝N双键特征有利于化合物稳定性的提高.     

镀金和碳纳米管修饰金电极上吸附态葡萄糖氧化酶比活性的EQCM研究

采用石英晶体微天平(EQCM)技术监测了裸金电极、镀金和碳纳米管修饰金电极上葡萄糖氧化酶(GOD)的吸附过程. 通过EQCM测量吸附固定的GOD质量, 并实时检测酶反应产物H2O2的氧化电量, 求算了各表面上吸附态GOD的比活性(ESAi). 结果表明, 各表面上均可吸附一定的GOD, 且吸附态GOD均有一定的酶活性; 修饰CNTs可增大酶吸附量和酶电极对葡萄糖的响应电流, 但ESAi随CNTs修饰量的增大而降低; Au电极上电镀金后, 酶吸附量和酶电极对葡萄糖的响应电流亦增大, 但ESAi与裸金电极上的基本一致.     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

多场耦合作用下光热敏感介电凝胶的力电耦合变形行为

介电弹性体在电场作用下将产生形变,为获得高的变形能,需对介电弹性体施以较强的电场,而强电场的施加可能诱发力电耦合失稳导致失效。针对光热敏感介电凝胶力电耦合变形行为,基于热力学和连续介质力学理论建立力电耦合变形模型,分析了光强、温度以及预拉伸对光热敏感介电凝胶力电耦合变形行为的影响,结果表明:无预拉伸时,随着电场强度的增大,光热敏感介电凝胶最终发生力电失稳,光强越小、温度越低发生力电失稳时的临界电压越高;预拉伸可显著改善力电稳定性,施加等双轴预拉伸后,凝胶厚度方向的伸长率显著变小,电场强度随电位移增大而线性增大,未出现力电失稳现象。     

A Transparent Thin Film with Hexagonal Mesostructure Containing Rhodamine 6G

A transparent this film was prepared by depositing the sol-gel mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G(R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure,was composed of nanocrystallites about 35 nm in diameter and 1-10μm in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover,optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.     

镍基气凝胶催化CH4-CO2重整制取合成气反应的研究 Ⅲ.影响催化剂积碳性能因素的探讨

考察了823K焙烧的干凝胶xNCA550、气凝胶aNCA550及浸渍型催化剂iNCA550在923K、1073K、1173K反应温度下的积碳行为，对催化剂表面碳的活性及类型进行了分析，并探讨了影响催化剂积碳的因素。实验结果表明，随反应温度的提高，催化剂的积碳能力减弱，尤以气凝胶催化剂aNCA550明显。催化剂的积碳主要发生在反应的初期，反应温度越高，到达积碳量相对稳定期所需要的时间越短；随着反应时间的延续，催化剂积碳量缓慢增长，并且表面碳的活性降低。催化剂的酸性和镍晶粒大小是影响其积碳性能的主要内在因素，而它们对积碳的影响程度受反应温度的影响，反应温度越高，催化剂表达酸性中心利于积碳的作用越小，小晶粒镍抑制催化剂积碳的能力越强。     

Ni的掺入对复合氧化物LaFeO3的结构及性质的影响

合成子Ｎｉ替代铁酸稀土复合氧化物ＬａＦ３１－ｘＮｉｘＯ３（ｘ＝０．１－０．６），对样品进行了ＸＲＤ、ＩＲ及Ｍｏｓｓｂａｕｅｒ谱测试，结果表明：ｘ＝０＼１，０＼２，０＼３的样品为正交相，ｘ＝０．５，０．６的样品为菱方相；伴随相结构从正交向菱方结构的转变，ＩＲ谱上Ｆｅ（Ｎｉ）－Ｏ键伸振动谱带向高频移动近２０ｃｍ＾－１，Ｍｏｓｓｂａｕｅｒ谱测试表明Ｆｅ均处于＋３自旋态，Ｎｉ离子以＋３价进入晶格。     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.