可调焦胶囊内窥镜光学系统设计

为解决胶囊内窥镜分辨率与景深相互制约的问题,将一种单液体、电控、可变焦液体透镜应用到内窥镜光学系统中进行光学设计,在保证分辨率的同时,扩大了系统景深.采用CODE V软件进行设计,建立系统初始结构,构造液体透镜模型,基于液体透镜中液体的体积不变,曲率、孔径和厚度可变的结构约束特点,在MATLAB中计算出不同物距下透镜的曲率、孔径和厚度数据,将其导入CODE V的系统模型中,并提出了相应的优化流程.设计并优化带有液体透镜的胶囊内窥镜系统,实现了系统在3~100mm景深范围内的清晰成像,视场角大于110°,全视场范围内调制传递函数在40lp/mm频率下均大于0.3.     

初始状态对自组织演化过程的影响

从实验上系统研究了在强电场下处于介质中的大量金属小球从不同初始状态通过自组织演化为分形的过程;用Sandbox方法定量分析了最终形成的稳定树枝状分形的维数。结果表明:不同初始状态形成分形的过程完全不同,但最终的树枝状分形的维数基本相同。分析认为,小球之间的相互作用存在临界作用距离,不同初始状态相邻小球之间的平均间距不同,因而演化过程不同;而维数相同正是系统耗散相同的体现。     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

N-杂环卡宾催化对硝基苯甲醛的氧化酯化

以空气为氧化剂,研究了在N-杂环卡宾催化下,对硝基苯甲醛与9种醇的氧化酯化反应。考察了不同卡宾前体、卡宾前体的用量以及溶剂对收率和反应速率的影响。结果表明,当以对硝基苯甲醛摩尔分数10%的溴化3-乙基-4-甲基-5-羟乙基噻唑鎓盐为催化剂,过量的原料醇为溶剂时,可以有效地催化氧化对硝基苯甲醛进行酯化反应,收率为36%~64%,但当使用与对硝基苯甲醛等摩尔比的醇时,收率仅为9%~29%。     

Effect of temperature on the morphologies and electrochemical properties of polyaniline-gold fibrillar nanocomposites

The polyaniline-gold (PANI-AuNPs) fibrillar nanocomposites were prepared via a simple one-pot synthesis route in ethylene glycol (EG) medium. The morphology of PANI-AuNPs was characterized by transmission electron microscopy (TEM), and their electrochemical properties were studied by CV, TAF and EIS measurement using an electrochemical workstation. The results show that the morphology of nanocomposites can be controlled by changing the temperature. The diameter of PANI-AuNPs composite nanofiber reduce from about 80 to 30 nm, and the size of AuNP also reduce from about 20 to 4 nm, with the rise of synthesized temperature. When the synthesized temperature is 10°C, the distribution of AuNPs is the best, and the amount of AuNPs dispersed in PANI is the most, as well as the electrochemical performance of PANI-AuNPs is the most excellent.     

微芯片毛细管电泳法快速测定盐酸二甲双胍

提出用带有非接触电导检测的微芯片毛细管电泳法快速测定片剂中盐酸二甲双胍的含量。取盐酸二甲双胍片20片,剥除糖衣后混匀研细,称取0.100 0g,用水超声溶解、过滤,滤液定容至100mL供毛细管电泳分析。十字通道芯片使用前按规定进行清洗。试验中采用含5%(体积分数)乙醇和0.1mmol·L-1十二烷基磺酸钠的2.0mmol·L-1柠檬酸缓冲溶液作为分离介质,进时间为10.0s,分离电压为1.3kV,可在1min内实现分离和测定。盐酸二甲双胍的质量浓度在10.0~110.0mg·L-1范围内与相应峰高呈线性关系,检出限(3S/N)为1.0mg·L-1。应用此方法分析了3个片剂样品,并用标准加入法做回收试验,测得回收率在94.5%~103%之间,测定值的相对标准偏差(n=6)在0.63%~1.1%之间。     

In Situ Pyrolysis Tracking and Real-Time Phase Evolution: From a Binary Zinc Cluster to Supercapacitive Porous Carbon

The in situ tracking of the pyrolysis of a binary molecular cluster [Zn₇(μ₃-CH₃O)₆(L)₆][ZnLCl₂]₂ is presented with one brucite disk and two mononuclear fragments (L=mmimp: 2-methoxy-6-((methylimino)-methyl)phenolate) to porous carbon using TG-MS from 30 to 900 °C. Following up the spilled gas product during the decomposed reaction of zinc cluster along the temperature rising, and in conjunction with XRD, SEM, BET and other materials characterization, where three key steps were observed: 1) cleavage of the bulky external ligand; 2) reduction of ZnO and 3) volatilization of Zn. The real-time-dependent phase-sequential evolution of the remaining products and the processing of pore forming template transformation are proposed simultaneously. The porous carbon structure featuring a uniform nano-sized pore distribution synthesized at 900 °C with the highest surface area of 1644 m² g⁻¹ and pore volume of 0.926 cm³ g⁻¹ exhibits the best known capacitance of 662 F g⁻¹ at 0.5 A g⁻¹.     

Mechanistic Study of Unprecedented Highly Regioselective Hydrocyanation of Terminal Alkynes: Insight into the Origins of the Regioselectivity and Ligand Effects

Density functional theory (DFT) calculations were performed to gain insight into the mechanism of the nickel-catalyzed hydrocyanation of terminal alkynes with Zn(CN)₂ and water to exclusively generate the branched nitrile with excellent Markovnikov selectivity. After precatalyst activation to give the LNi(0) active species, the transformation proceeds via the following steps: (1) oxidative addition of H₂O to the LNi(0) provides the intermediate LNi(II)H(OH); (2) ligand exchange of LNi(II)H(OH) with Zn(CN)₂ gives the intermediate LNi(II)H(CN); (3) alkyne insertion to the LNi(II)H(CN) forms the alkenyl nickel complex, followed by the reductive elimination step reaching the final product. This mechanism is kinetically and thermodynamically more favorable than that of the experimental proposed ones. On the basis of the experimental observations, more water molecules cannot further improve the reaction as it has also been rationalized. Furthermore, the origin of the high regioselectivity of the product, the variable effectiveness of the metal mediator as function of ligands, as well as the high yield of the alkyl-substituted alkynes substrates, is analyzed in detail. © 2019 Wiley Periodicals, Inc.     

Emerging Bottom-Up Strategies for the Synthesis of Graphene Nanoribbons and Related Structures

The solution-phase synthesis is one of the most promising strategies for the preparation of well-defined graphene nanoribbons (GNRs) in large scale. To prepare high quality, defect-free GNRs, cycloaromatization reactions need to be very efficient, proceed without side reaction and mild enough to accommodate the presence of various functional groups. In this Minireview, we present the latest synthetic approaches for the synthesis of GNRs and related structures, including alkyne benzannulation, photochemical cyclodehydrohalogenation, Mallory and Pd- and Ni-catalyzed reactions.     

马尿酸分子印迹电化学传感器的制备及应用

采用超声法制备g-C3N4/NiO复合催化材料,将其滴涂在玻碳电极(GCE)表面构建g-C3N4/NiO/GCE催化电极。采用电聚合方法,以马尿酸为模板分子,邻苯二胺为功能单体构建M IP/g-C3N4/NiO/GCE传感器。采用时间-电流法对传感器制备条件优化。结果表明,复合催化材料对H2O2具有良好的催化效果。分子印迹传感器对马尿酸具有良好的选择性。在优化条件下,马尿酸质量浓度在0.05~2 mg/L范围内,电极电流响应与浓度呈良好的线性关系,检出限为7.1μg/L。将电极用于尿液中马尿酸的检测,回收率在87.3%~95.3%之间。