马尿酸分子印迹电化学传感器的制备及应用

采用超声法制备g-C3N4/NiO复合催化材料,将其滴涂在玻碳电极(GCE)表面构建g-C3N4/NiO/GCE催化电极。采用电聚合方法,以马尿酸为模板分子,邻苯二胺为功能单体构建M IP/g-C3N4/NiO/GCE传感器。采用时间-电流法对传感器制备条件优化。结果表明,复合催化材料对H2O2具有良好的催化效果。分子印迹传感器对马尿酸具有良好的选择性。在优化条件下,马尿酸质量浓度在0.05~2 mg/L范围内,电极电流响应与浓度呈良好的线性关系,检出限为7.1μg/L。将电极用于尿液中马尿酸的检测,回收率在87.3%~95.3%之间。     

用自行设计的自动分析系统测定高含量SO3--对硫酸钡浊度测定法的改进

为了解决湿法磷酸生产中高含量SO3的测定,对硫酸钡浊度测定法的反应条件进行了改进,并自行设计制造了自动化的分析系统。测定时样品由蠕动泵(P)推入酸化盘管(AC)中进行酸化和稀释,由定量环(Sv)取样25μL,注入反应系统。在第一反应盘管(RC1)中,SO3与第一混合试剂中的BaCl2溶液反应生成BaSO4悬浊液,该溶液中的聚乙二醇-4000(PEG-4000)和乙醇通过协同作用避免了BaSO4颗粒的团聚,降低粒子间的相互作用,使BaSO4的生成减少,降低了测定的灵敏度,提高了稳定性。在第二反应盘管(RC2)中,BaSO4与第二混合试剂中的NH3·H2O/乙二胺四乙酸二钠(Na2EDTA)溶液发生络合反应同时被Na2EDTA包裹,进一步降低其灵敏度。最后反应溶液进入流通式光度检测器,在680.0nm波长处测试BaSO4悬浊液的吸光度。经优化试验条件,上述第一混合试剂中3种组分的质量分数或体积分数为:BaCl24%,PEG-4000 3%和乙醇2%;第二混合试剂中Na2EDTA的质量分数为6%,NH3·H2O的体积分数为6%。对实际按本方法及重量法分析进行测定,两种方法所得结果的相对偏差在±2%以内,且不受共存的高含量PO43-和F-的干扰。     

典型全氟有机酸类化合物的样品前处理与分析方法研究进展

全氟辛烷磺酸（PFOS）和全氟辛烷羧酸（PFOA）是两种典型的全氟有机酸类化合物,也是全氟化合物（PFCs）前体物的最终降解产物,具有肝毒性、胚胎毒性、生殖毒性、神经毒性,检出率最高。在各种被污染的介质中,PFOS和PFOA含量往往很低,基体复杂多样,快速高效的样品前处理技术成为测定的关键环节。目前,国际上对PFOS和PFOA的测定无统一标准,而我国关于PFCs的分析研究落后于国际发展水平。该文介绍了PFOS和PFOA的特性,系统总结和评述了前处理技术（液液萃取、固相萃取、固相微萃取、超声萃取和QuEChERS法）及分析方法（色谱-质谱方法、光谱法、酶联免疫法和电化学法）,以期为PFOS和PFOA的分析监测及标准制定提供参考。     

Selenophene‐Flanked Diketopyrrolopyrrole Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

The development of selenophene‐flanked DPP (SeDPP) based copolymers, especially for the ambipolar ones, lags behind other aromatic group flanked DPP‐based polymers. Herein, we report two new ambipolar SeDPP‐based conjugated polymers. One is the alternating polymer PSeDPPFT with normal SeDPP and 3,4‐difluorothiophene units. The other is PSeFDFT , in which the electron acceptor unit is replaced by a new SeDPP derivative, referred as to half‐fused SeDPP. The more planar structure of half‐fused SeDPP endows the backbone of PSeFDFT with good rigidity and planarity. Both polymers exhibit ambipolar transporting properties in air. The PSeFDFT based field‐effect transistors (FETs) display higher and more balanced ambipolar properties with μ_h^ave of 0.27 cm²·V^–1·s^–1, μ_e^ave of 0.18 cm²·V^–1·s^–1, and μ_h^ave/μ_e^ave of 1.5 than those of PSeDPPFT (μ_h^ave = 0.11 cm²·V^–1·s^–1, μ_e^ave = 0.042 cm²·V^–1·s^–1, and μ_h/μ_e = 2.6). This is attributed to the more planar structure, lower LUMO level, higher HOMO level, and better interchain packing orientations of PSeFDFT by comparing with PSeDPPFT . Therefore, a new molecular design strategy to modulate the hole and electron transporting properties is proposed for conjugated D‐A polymers.     

Emerging Bottom‐Up Strategies for the Synthesis of Graphene Nanoribbons and Related Structures

The solution‐phase synthesis is one of the most promising strategies for the preparation of well‐defined graphene nanoribbons (GNRs) in large scale. To prepare high quality, defect‐free GNRs, cycloaromatization reactions need to be very efficient, proceed without side reaction and mild enough to accommodate the presence of various functional groups. In this Minireview, we present the latest synthetic approaches for the synthesis of GNRs and related structures, including alkyne benzannulation, photochemical cyclodehydrohalogenation, Mallory and Pd‐ and Ni‐catalyzed reactions.     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

基于FPGA的4k点基-16FFT模块的实现

针对高速实时处理的要求,提出了4096点快速傅立叶变换(FFT)模块在现场可编程门阵列(FPGA)中的设计和实现。在运算模块中,基于按频率抽取基-4算法提出了一种新型的基-16蝶型算法,并采用八级流水结构和四路转换器来实现。本文采用块浮点和循环存储结构,避免了溢出和节省了大量的硬件资源。实验结果表明,该方法在保证了运算精度和实现复杂度的同时,使运算速度相对于基-4算法提高了1倍。     

一种STN-LCD驱动电路的可靠性分析与设计

文章主要对一种常规的小规模STN-LCD驱动电路在使用过程中出现的可靠性失效问题进行分析和讨论,对在干扰环境中工作的集成电路的芯片级的抗干扰和可靠性设计提出了一些建议及总结。在实际分析过程中,采用模拟再现实际使用环境进行实验等方式,对电路出现的失效现象进行再现和定位。通过对失效结构的设计线路和失效机理的分析,对具体引起失效的上电复位结构和通信端口结构进行了设计改进。目前,经过实际流片和测试,改进方案通过了验证。     

Sb掺杂SnO2修饰双电层电容活性炭电极的研究

应用sol-gel浸渍与热处理工艺相结合,在活性炭表面包覆Sb掺杂的SnO2薄膜对电极进行修饰,构成AC-SnO2/KOH/AC-SnO2双电层电容器,测试结果表明,400 mA/g电流密度条件下,修饰后的双电层电容器在0.001～1.5 V相对较高电压区间的放电容量,比AC/KOH/AC双电层电容器在0.001～1.0 V电压区间高36%,但AC-SnO2的单电极比电容仅为AC单电极比电容的91.9%;当电流密度大于400 mA/g,两种电极的大电流性能相当。