镍基气凝胶催化CH4-CO2重整制取合成气反应的研究 Ⅲ.影响催化剂积碳性能因素的探讨

考察了823K焙烧的干凝胶xNCA550、气凝胶aNCA550及浸渍型催化剂iNCA550在923K、1073K、1173K反应温度下的积碳行为，对催化剂表面碳的活性及类型进行了分析，并探讨了影响催化剂积碳的因素。实验结果表明，随反应温度的提高，催化剂的积碳能力减弱，尤以气凝胶催化剂aNCA550明显。催化剂的积碳主要发生在反应的初期，反应温度越高，到达积碳量相对稳定期所需要的时间越短；随着反应时间的延续，催化剂积碳量缓慢增长，并且表面碳的活性降低。催化剂的酸性和镍晶粒大小是影响其积碳性能的主要内在因素，而它们对积碳的影响程度受反应温度的影响，反应温度越高，催化剂表达酸性中心利于积碳的作用越小，小晶粒镍抑制催化剂积碳的能力越强。     

Ni的掺入对复合氧化物LaFeO3的结构及性质的影响

合成子Ｎｉ替代铁酸稀土复合氧化物ＬａＦ３１－ｘＮｉｘＯ３（ｘ＝０．１－０．６），对样品进行了ＸＲＤ、ＩＲ及Ｍｏｓｓｂａｕｅｒ谱测试，结果表明：ｘ＝０＼１，０＼２，０＼３的样品为正交相，ｘ＝０．５，０．６的样品为菱方相；伴随相结构从正交向菱方结构的转变，ＩＲ谱上Ｆｅ（Ｎｉ）－Ｏ键伸振动谱带向高频移动近２０ｃｍ＾－１，Ｍｏｓｓｂａｕｅｒ谱测试表明Ｆｅ均处于＋３自旋态，Ｎｉ离子以＋３价进入晶格。     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.     

Relationship between Structure and SHG Effect of Substituted Thienyl Chalcone

1INTRODUCTIONRecentlyorganicnonlinearoptical(NLO)materialsarebeingdevelopedforfre-quencyconversionoflaserinopto-electrics-Especiallybluelightisrequiredforopti-calmemoryofhighdensityrecording.Becauseadiodelaserisusedasalightsource,thenonlinearmaterialswhichhaveextremelyhighvalueofNLOcoefficientsandthetransmissionofblueregionarenecessary.Sincethesecond-orderNLOpropertyoforganiccompoundisderivedfromconjugateddelocalizedrrelectrons,thecompoundswhichhavebeenreportedhavefocusedonthenitroanil…     

气相色谱-质谱联用法检测保健品中的违禁药物

近年来,随着社会消费水平的不断提高,保健品市场日益兴旺,但暴露出来的问题也十分严重。假冒配方、虚假广告、任意夸大其功效作用的宣传已为社会与公众所关注,而添加违禁合成药物、假化学成分达到或增加其功效作用的行为更具隐蔽性、欺骗性和危害性,为一般消费者所难以识别。因     

贝叶斯融合在SAR图像分类中的应用

本文研究将数据融合理论用于SAR图像分类.通过贝叶斯理论进行多通道SAR图像测量级数据融合,充分利用像素的从属信息并获得单通道分类无法获取的分类结果,有效保留各通道有用信息并抑制图像中的斑点噪声;针对贝叶斯融合涉及到的先验概率的问题采用两种方式进行先验概率估计,对估计引起的马赛克现象提出了三种解决方法;并提出三种先验概率融合方法,比较得出相对最优的SAR图像多通道分类方案.     

S-5N全固态重复频率脉冲发生器

 主要介绍S-5N的结构及测试实验结果。S-5N型全固态重复频率脉冲发生器是目前国际上同类源中峰值功率和平均功率均为最大的一台。随负载大小的变化，S-5N脉冲发生器的输出电压为400～600kV，输出电流2～3kA，输出脉冲半高宽40～50ns，单脉冲输出能量40～65J。 S-5N脉冲发生器在300Hz重复频率条件下可连续工作，500Hz重复频率条件下可连续工作3min，平均输出功率高达30kW。     

A mitochondrial-targeted ratiometric probe for detecting intracellular H2S with high photostability

Based on 4-bromo-1,8-naphthalic anhydride, one novel ratiometric fluorescence H₂S-probe (IDNA) was designed and synthesized. Further studies indicate that IDNA can sensitively recognize H₂S (detection limit of 7 μmol/L) with good selectivity and anti-interference ability. In addition, IDNA has satisfactory photostability in HeLa cells, ability of mitochondrial co-localization, and can be utilized in fluorescence imaging of H₂S.     

聚丙烯及增韧剂对复合材料熔接痕强度的影响

研究了聚丙烯基体的熔体粘度(以熔体流动速率表征)、增韧剂POE的粘度(以门尼粘度表征)、增韧剂POE的含量等因素对聚丙烯复合材料熔接痕强度的影响。结果表明:聚丙烯基体/增韧剂的粘度比越小,聚丙烯复合材料的熔接痕强度越高,即聚丙烯粘度越小、增韧剂粘度越大,整个复合材料的熔接痕强度越高;增韧剂POE的含量越大复合材料的熔接痕强度越小。     

Partial Hydrolysis of Cyanide Coordination Polymers Induced by a Pillar Ligand with Optimized Electrochemical Kinetics for Rechargeable Alkaline Batteries

Coordination polymers are promising cathode materials for rechargeable alkaline batteries. Therefore, the precise modulation of these cathodes by chemical structure and in-depth structure transform study is necessary. Here, two model coordination polymer battery cathodes were designed to demonstrate the dynamic structure–performance relationship. We studied the electrochemical performance of two kinds of nickel-based coordination polymer, comprising a planar 2D cyanide-bridged network and a 3D cyanide-bridged network pillared by pyrazine molecules. The 2D coordination polymer showed serious voltage degradation with poor rate capability, whereas the 3D coordination polymer exhibited stable voltage output coupled with high rate at various current densities. The investigation revealed the underlining relationship of plateau voltage degradation and hydrolysis process of electrodes. It was revealed that the pyrazine pillar molecules in the 3D coordination polymer could suppress the hydrolysis and lead to the in situ formation of partially hydrolyzed structure with excellent electrochemical kinetics; this exhibited obvious smaller peak separation (27 mV compared with 149 mV) and hence an almost twofold increase in capacity retention (31.9 to 50.0 %) and energy density retention (18.2 to 35.9 %) at 10 A g⁻¹.