Integration of [(Co(bpy)3]2+ Electron Mediator with Heterogeneous Photocatalysts for CO2 Conversion

An efficient chemical system for electron generation and transfer is constructed by the integration of an electron mediator ([Co(bpy)₃]²⁺; bpy=2,2′‐bipyridine) with semiconductor photocatalysts. The introduction of [Co(bpy)₃]²⁺ remarkably enhances the photocatalytic activity of pristine semiconductor photocatalysts for heterogeneous CO₂ conversion; this is attributable to the acceleration of charge separation. Of particular interest is that the excellent photocatalytic activity of heterogeneous catalysts can be developed as a universal photocatalytic CO₂ reduction system. The present findings clearly demonstrate that the integration of an electron mediator with semiconductors is a feasible process for the design and development of efficient photochemical systems for CO₂ conversion.     

Raman spectra of proton order of thin ice Ih film

The polarized Raman spectra of the upper part of a thin ice Ih film were obtained in the range of 150 cm⁻¹ to 3800 cm⁻¹. The spectra showed clear polarization dependence; several new peaks were also observed. The longitudinaloptic–tranverseoptic (LO–TO) splitting of the mode near 220 cm⁻¹ in the translational vibration region was experimentally confirmed at 133 K. The Fermi resonance between the bending overtone (around 3270 cm⁻¹) and symmetry stretching fundamental (around 3350 cm⁻¹) in the stretching vibration region appeared at nearly the same temperature. Results showed that ice XI (i.e. proton‐ordered phase of ice Ih) slowly formed in the upper part of a thin ice Ih film without KOH as the temperature gradually decreased below 133 K. Copyright © 2015 John Wiley & Sons, Ltd.     

Photonic Floquet topological insulators in atomic ensembles

The feasibility of realizing a photonic Floquet topological insulator (PFTI) in an atomic ensemble is demonstrated. The interference of three coupling fields will split energy levels periodically, to form a periodic refractive index structure with honeycomb profile that can be adjusted by different frequency detunings and intensities of the coupling fields. This in turn will affect the appearance of Dirac cones in momentum space. When the honeycomb lattice sites are helically ordered along the propagation direction, gaps open at Dirac points, and one obtains a PFTI in an atomic vapor. An obliquely incident beam will be able to move along the zigzag edge of the lattice without scattering energy into the PFTI, due to the confinement of edge states. The appearance of Dirac cones and the formation of a photonic Floquet topological insulator can be shut down by the third‐order nonlinear susceptibility and opened up by the fifth‐order one.

     

Theoretical performance analysis of radio frequency fingerprinting under receiver distortions

Radio frequency fingerprinting (RFF) is used to uniquely identify individual emitters by exploiting the radio frequency characteristics, which are originated from transmitter imperfections. The theoretical performance is analyzed to evaluate the feasibility of RFF with channel noise and receiver imperfections. The distortions from oscillators and analog‐to‐digital converter (ADC) are considered, and a RFF signal model describing the discrepancies of transmitter imperfections, channel noise, and receiver distortions are constructed. A likelihood ratio test algorithm for RFF is proposed to analyze the theoretical performance. The upper and lower bound of theoretic performance is derived through the analysis of the likelihood ratio test statistic, which enlightens how to design a “just enough” receiver to meet the demands of RFF. The simulation results are in agreement with the theoretical evaluation. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel 3D Tesla valve micromixer for efficient mixing and chitosan nanoparticle production

Current three-dimensional micromixers for continuous flow reactions and nanoparticle synthesis are complex in structure and difficult to fabricate. This paper investigates the design, fabrication, and characterization of a novel micromixer that uses a simple spatial Tesla valve design to achieve efficient mixing of multiple solutions. The flow characteristics and mixing efficiencies of our Tesla valve micromixer are investigated using a combination of numerical simulations and experiments. The results show that in a wide range of flow rates, viscoelastic solutions with different concentrations can be well mixed in our micromixer. Finally, experiments on the synthesis of chitosan nanoparticles are conducted to verify the practicability of our micromixer. Compared with nanoparticles prepared by conventional magnetic stirring, the size of nanoparticles prepared by micromixing is smaller and the distribution is more uniform. Therefore, our Tesla valve micromixer has significant advantages and implications for mixing chemical and biological reactions.     

固态氧化物电解池中碳-分子电化学转化为可再生燃料

近年来,随着社会环保意识的迅速提高以及对可再生能源利用能力的大幅增强,以燃料电池和电解池为代表的电化学技术已经逐渐在能源的存储、转化和利用方面发挥着不可或缺的独特作用.其中,固态氧化物电解池经过多年的发展,在装置成本和工作效率上取得了长足的进步,在储能转化方面具有重要的潜力.与此同时,伴随着《巴黎协定》签订以来各国的“碳中和”路线图逐渐出台,利用相对廉价易得的可再生电能,将二氧化碳(CO₂)和甲烷(CH₄)等碳-(C1)分子电解转化为高附加值的可再生燃料(如水煤气、乙烯等),对于碳中和目标的实现具有重要的意义.因此,C1分子电化学转化的研究成为了当下重点关注的研究领域,许多重要的研究成果和技术进步在过去几年中不断涌现.固态氧化物电解池作为一种代表性的C1分子电解和转化平台,也日渐引起相关领域研究人员的关注和兴趣.与传统的C1分子催化转化方法相比,基于固态氧化物电解池的电解转化技术具有两个重要优点:高能量转换效率与体系抗中毒能力.这两个特性作为体系稳健性的基石,保障了C1分子转化为可再生燃料的反应过程的长期可持续性.本文首先简要回顾了固态氧化物电解池的前沿技术与发展,并从电解池系统分类、反应体系的特征和反应体系发展的前景与挑战这三个方面,简要介绍了近年来基于固态氧化物电解池体系的C1分子电化学转化的代表性工作.CO₂与CH₄作为廉价易得的C1分子的代表,其转化因其反应分子惰性及反应过程不可控性而广受研究者关注,本文重点关注了在固态氧化物电解池中CO₂,CO₂/H₂O和CH₄三个体系的电化学反应过程和近期研究进展,希望可为相关研究人员未来设计更合适的催化剂和构建更优的电解池结构提供有益的参考.本文还针对目前固态氧化物电解池体系在C1分子转化领域所面临的挑战,提出了未来的一些可能的研究方向,以期助力研究者在不远的将来实现C1分子电解生产可再生燃料的实用化.     

Two New CPA-Type Indole Alkaloids from the Tobacco-Derived Fungus Aspergillus versicolor and the Anti-TMV Activity

Chemistry of Natural Compounds - Two new CPA-type indole alkaloids (1 and 2) were isolated from the fungus Aspergillus versicolor. Their structures were determined by means of HR-ESI-MS and...     

Energy Band Alignment and Redox-Active Sites in Metalloporphyrin-Spaced Metal-Catechol Frameworks for Enhanced CO2 Photoreduction

Two new chemically stable metalloporphyrin-bridged metal-catechol frameworks, InTCP-Co and FeTCP-Co, were constructed to achieve artificial photosynthesis without additional sacrificial agents and photosensitizers. The CO₂ photoreduction rate over FeTCP-Co considerably exceeds that obtained over InTCP-Co, and the incorporation of uncoordinated hydroxyl groups, associated with catechol, into the network further promotes the photocatalytic activity. The iron-oxo coordination chain assists energy band alignment and provides a redox-active site, and the uncoordinated hydroxyl group contributes to the visible-light absorptance, charge-carrier transfer, and CO₂-scaffold affinity. With a formic acid selectivity of 97.8 %, FeTCP-OH-Co affords CO₂ photoconversion with a reaction rate 4.3 and 15.7 times higher than those of FeTCP- Co and InTCP-Co, respectively. These findings are also consistent with the spectroscopic study and DFT calculation.     

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic acid)/Poly(D-lactic acid) Blends: Effect of Blend Ratio

Stereocomplex (SC) crystallization has been an effective way to improve the physical performances of stereoregular polymers. However, the competition between homo and SC crystallizations can lead to more complicated crystallization kinetics and polymorphic crystalline structure in stereocomplexable polymers, which influences the physical properties of obtained materials. Herein, we select the medium-molecular-weight (MMW) poly(_L-lactic acid)/poly(_D-lactic acid) (PLLA/PDLA) asymmetric blends with different PDLA fractions (f_D=0.01–0.5) as the model system and investigate the effects of f_D and crystallization temperature (T_c) on the crystallization kinetics and polymorphic crystalline structure. We observe the fractionated (i.e., multistep) crystallization kinetics and the formation of peculiar β-form homocrystals (HCs) in the asymmetric blends under quiescent conditions, which are strongly influenced by both f_D and T_c. Precisely, crystallization of β-form HCs is favorable in the MMW PLLA/PDLA blends with high f_D (≥0.2) at a low T_c (80–100 °C). It is proposed that the formation of metastable β-form HCs is attributed to the conformational matching between β-form HCs and SCs, and the stronger constrain effects of precedingly-formed SCs in the early stage of crystallization. Such effects can also cause the multistep crystallization kinetics of MMW PLLA/PDLA asymmetric blends in the heating process.

     

Highly porous CuO/MnO2 catalyst prepared by gas release-assisted technology and its enhancement of formaldehyde removal efficiency

Research on Chemical Intermediates - A porous CuO/MnO2 catalyst was synthesized by a gas release-assisted method. Due to the participation of gases (H2O, NH3, CO2) released from ammonia and...