Synthesis, structure and heterogeneous catalytic activities of Cu-containing polymeric compounds: anion effect and comparison of homogeneous vs. heterogeneous catalytic activity

The structures of new polymeric compounds containing Cu(II) ions and btp (2,6-bis(N'-1,2,4-triazolyl)pyridine) ligands have been determined. The btp ligands bridge Cu(II) ions to form double zigzag chains, [Cu(ClO4)2(btp)2] 3 with perchlorate anions, and form single zigzag chains, [Cu(btp)(H2O)4](SO4).2H2O 4 with sulfate anions. The polymeric compound 3 was found to effectively catalyze the epoxide ring-opening reaction with methanol, while polymeric compound 4 was almost inactive with epoxides under the same conditions. The polymeric compound 3 showed an efficient catalytic activity and regioselective reactivity in the ring opening of epoxides and allowed reuse without a significant loss of activity through three runs with epoxides.     

Dual-phase gas-permeation flow-injection thermometric analysis for the determination of carbon dioxide

A flow-injection configuration based on a dual-phase gas-permeation system from a liquid donor to a gas acceptor stream with a thermistor flow-through detector is proposed for the direct analysis of the gas in the acceptor. This system was applied for the determination of carbon dioxide (in the form of carbonate) using the following chemical reaction: CO(2)(g)+2NH(3)(g)+H(2)O(g)=(NH(4))(2)CO(3)(s), with a linear response from 1x10(-3) to 50x10(-3) mol l(-1) of CO(3)(2-). Carbon dioxide was produced in the liquid donor and permeated into the gaseous acceptor stream of air/water vapor. The detection limit is 1x10(-3) mol l(-1) of carbonate, and a sampling frequency of 60 h(-1) is achieved with a relative standard deviation of 4.1% for replicate injections. The dual-phase gas-permeation flow-injection manifold, along with the membrane and phase separations, as well as the chemical reaction, provides enhanced selectivity when compared with the system employing a liquid acceptor stream, as serious interferents in this system, for instance, acetate and formate, among others, do not interfere in the proposed system.     

Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.     

MgF(3)(-) as a transition state analog of phosphoryl transfer

The formation of complexes between small G proteins and certain of their effectors can be facilitated by aluminum fluorides. Solution studies suggest that magnesium may be able to replace aluminum in such complexes. We have determined the crystal structure of RhoA.GDP bound to RhoGAP in the presence of Mg(2+) and F(-) but without Al(3+). The metallofluoride adopts a trigonal planar arrangement instead of the square planar structure of AlF(4)(-). We have confirmed that these crystals contain magnesium and not aluminum by proton-induced X-ray emission spectroscopy. The structure adopted by GDP.MgF(-) possesses the stereochemistry and approximate charge expected for the transition state. We suggest that MgF3(-) may be the reagent of choice for studying phosphoryl transfer reactions.     

Interfacial Characteristics and Fracture Toughness of Electrolytically Ni-Plated Carbon Fiber-Reinforced Phenolic Resin Matrix Composites

The electrolytic plating of metallic nickel on a carbon fiber surface has been carried out in order to improve the interfacial adhesion and the mechanical properties in carbon fiber/phenolic matrix composite systems. The surface and the mechanical interfacial properties of composites are characterized by X-ray photoelectron spectrometry (XPS), surface free energy, and the critical stress intensity factor (K(IC)). From the experimental results, it is clearly revealed that the oxygen functional groups and the metallic nickel on fibers largely affect the mechanical interfacial behavior of the composites, resulting in increased surface polarity, whereas the nitrogen functional groups have no effect. Also, a good correlation between surface oxygen functional groups and mechanical interfacial properties and between wettability and K(IC) is established and it is found that a 10 A m(-2) current density is the optimum condition for this system. Copyright 2001 Academic Press.     

Design and parallel solid-phase synthesis of ring-fused 2-pyridinones that target pilus biogenesis in pathogenic bacteria

A new method for the solid-phase synthesis of enantiomerically enriched highly substituted ring-fused 2-pyridinones 13 has been developed. The synthesis mediates introduction of substituents at two positions in the 2-pyridinone ring in a diverse manner and is suitable for parallel synthesis. (19)F NMR spectroscopy was used as a tool to monitor each of the five steps in the reaction sequence. The optimized conditions thus obtained were then used to prepare a library of 20 2-pyridinones with high yields. The library members were chosen from a statistical multivariate design to ensure diversity and reliable data for structure-activity relationships. Screening of the library against the bacterial periplasmic chaperone PapD was performed using surface plasmon resonance. Three new 2-pyridinones with a higher affinity for the chaperone PapD than the previous best 13[10,1] were found, and important structural features could be deduced.     

Stereoselective association of binuclear metallacycles in coordination polymers

A series of structurally related binuclear metallacycles [Cd(NO(3))(2)L](2), where L is an angular exo-bidentate ligand, have been synthesized. Each metallacycle contains two coordinatively unsaturated, chiral metal centers within a single molecule, and the assembly of these metallacycles into polymeric framework structures has been studied systematically for the first time. Stereoselective homochiral association of [Cd(NO(3))(2)L](2) leads to the formation of helical coordination polymers, whereas meso type association results in nonhelical chain structures. The type of stereoselective aggregation depends on the conditions of self-assembly as well as on ligand functionality. Both helical and nonhelical polymeric complexes have been isolated for the metallacycle [Cd(NO(3))(2)(2,4'-pyacph)](2) (2,4'-pyacph = 2,4'-(4-ethynylphenyl)bipyridyl). Homochiral association results in the formation of helical [Cd(NO(3))]( infinity ) chains which link the binuclear [Cd(NO(3))(2)(2,4'-pyacph)](2) metallacycles into racemic two-dimensional sheets which contain both P and M [Cd(NO(3))]( infinity ) helices. In contrast, meso-association leads to the formation of nonhelical one-dimensional chains. It is shown that the product of homochiral association is predominately formed at room temperature and that of meso-association is generated at elevated temperatures. Thus, it may be concluded that the homochiral association appears to be energetically less favorable than the meso-association, a conclusion that has been confirmed by theoretical calculations of the crystal lattice energy. Several high-yield syntheses of bipyridyl-type ligands used for metallacyclic assembly are also reported.     

Unusual solid-state behavior in a neutral [2]catenane bearing a hydrolyzable component

A template-directed strategy to forming a bis(diimide) macrocycle through an intermediate asymmetric [2]catenane is reported. Saponification of the ester linkages within the crown ether component is much slower in the mechanically interlocked structure when compared to the free crown. The predominance of a single translational isomer leads to a dimeric structure, resulting in the generation of infinite channels within the crystal lattice. [structure: see text]     

Host-guest interactions template: the synthesis of a [3]catenane

Formation of a [3]catenane containing dibenzo-24-crown ether wheels and a large dipyridiniumethane ring is templated by formation of a host-guest adduct between the [3]catenane and the external crown ether.