A mediator-type biosensor as a new approach to biochemical oxygen demand estimation

A novel biosensor for the determination of biochemical oxygen demand (BOD) was developed using potassium hexacyanoferrate(III) [HCF(III)] as a mediator. The sensor element consists of a three-electrode system, with both working and counter electrodes compactly integrated as a disposable using etching and electroplating processes. Pseudomonas fluorescens biovar V (isolated from a wastewater treatment plant) was immobilized on the surface of the working electrode using poly(vinyl alcohol)-quaternized stilbazol (PVA-SbQ) photopolymer gel. Synthetic wastewater described by the Organization for Economic Cooperation and Development (OECD) was used as a standard solution instead of glucose-glutamic acid synthetic wastewater. The conditions of amperometric measurement were optimized at +600 mV (vs. Ag/AgCl) operating potential, namely 40 mM HCF(III) in a 0.1 M phosphate buffer (pH 7.0) at 20 degrees C. The sensor response was linear from 15 up to 200 mg O l-1 BOD. The response time was 15 min at 200 mg O l-1 BOD. To demonstrate the wide metabolic range of activity of the sensor, the sensor response to 14 substances in four categories of organic compounds was investigated. Further, it was shown that the response of this BOD sensor was not influenced in samples with low concentrations of dissolved oxygen under the measuring conditions used. For real wastewaters, the BOD values were determined using the sensor and compared favorably with those determined by the conventional BOD5 method.     

Photoinduced Ru-Yb energy transfer and sensitised near-IR luminescence in a coordination polymer containing co-crystallised [Ru(bipy)(CN)4]2- and Yb(III) units

Co-crystallisation of the anionic cyanometallate chromophore [Ru(bipy)(CN)4]2- with Yb(III) provides coordination polymers or oligomers containing Ru-CN-Yb bridges; in [K(H2O)4][Yb(H2O)6][Ru(bipy)(CN)4]2.5H2O Ru-->Yb energy-transfer (k > 5 x 10(6) s(-1)) results in partial quenching of the Ru-based luminescence and sensitised near-IR luminescence from the Yb(III) unit.     

Thick-target PIGE analysis of plant materials preconcentrated by dry ashing

An analytical methodology has been developed for the UV-spectrophotometric determination of carbaryl in waters after its preconcentration onto a polyether type polyurethane foam followed by on-line elution. The aforementioned strategy offers an easy way for in-field sampling and to improve the analytical sensitivity. Several chemical and flow variables (mass of sorbent, sample flow rate, sample volume and carrier flow rate) were studied to ensure the best performance of the system. Recovery studies, carried out on natural water samples spiked with known amounts of carbaryl at concentration levels between 250 and 500 mug l(-1), provided recovery percentages between 94 and 105%. A detection limit of 12 mug l(-1) was achieved and a variation coefficient of 3.4% was obtained at 0.50 mug ml(-1).     

Flow injection reagent introduction by supported liquid and nafion membranes: determination of phosphate

The use of membrane tubing for the introduction of reagents for the determination of phosphate in waters by flow injection analysis was studied. The use of membranes eliminates the need for confluence points in the design of flow injection manifolds. This increases the sensitivity of the manifold by providing a sufficient reagent excess for the reaction without diluting the sample. Methods for the introduction of acid, molybdate and hydrazine were devised for the determination of phosphate by the Molybdenum Blue method. Several membranes were examined and Nafion and Accurel (microporous polypropylene) were found to be most useful. Molybdate introduction was achieved using a supported liquid membrane (SLM). Calibration was linear and a detection limit of 12 ppb phosphate (4 ppb phosphorus) was obtained.     

Noniterative compensation for the distance-dependent detector response and photon attenuation in SPECT imaging

A filtering approach is described, which accurately compensates for the 2D distance-dependent detector response, as well as for photon attenuation in a uniform attenuating medium. The filtering method is based on the frequency distance principle (FDP) which states that points in the object at a specific source-to-detector distance provide the most significant contribution to specified frequency regions in the discrete Fourier transform (DFT) of the sinogram. By modeling the detector point spread function as a 2D Gaussian function whose width is dependent on the source-to-detector distance, a spatially variant inverse filter can be computed and applied to the 3D DFT of the set of all sinogram slices. To minimize noise amplification the inverse filter is rolled off at high frequencies by using a previously published Wiener filter strategy. Attenuation compensation is performed with Bellini's method. It was observed that the tomographic point response, after distance-dependent filtering with the FDP, was approximately isotropic and varied substantially less with position than that obtained with other correction methods. Furthermore, it was shown that processing with this filtering technique provides reconstructions with minimal degradation in image fidelity.     

Bayesian image reconstruction in SPECT using higher order mechanical models as priors

While the ML-EM algorithm for reconstruction for emission tomography is unstable due to the ill-posed nature of the problem. Bayesian reconstruction methods overcome this instability by introducing prior information, often in the form of a spatial smoothness regularizer. More elaborate forms of smoothness constraints may be used to extend the role of the prior beyond that of a stabilizer in order to capture actual spatial information about the object. Previously proposed forms of such prior distributions were based on the assumption of a piecewise constant source distribution. Here, the authors propose an extension to a piecewise linear model-the weak plate-which is more expressive than the piecewise constant model. The weak plate prior not only preserves edges but also allows for piecewise ramplike regions in the reconstruction. Indeed, for the authors' application in SPECT, such ramplike regions are observed in ground-truth source distributions in the form of primate autoradiographs of rCBF radionuclides. To incorporate the weak plate prior in a MAP approach, the authors model the prior as a Gibbs distribution and use a GEM formulation for the optimization. They compare quantitative performance of the ML-EM algorithm, a GEM algorithm with a prior favoring piecewise constant regions, and a GEM algorithm with their weak plate prior. Pointwise and regional bias and variance of ensemble image reconstructions are used as indications of image quality. The authors' results show that the weak plate and membrane priors exhibit improved bias and variance relative to ML-EM techniques.