Synthesis and spectroscopic studies of non-heme diiron(III) species with a terminal hydroperoxide ligand: models for hemerythrin

Two compounds, [Fe2(mu-OH)(mu-Ph4DBA)(TMEDA)2(OTf)] (4) and [Fe2(mu-OH)(mu-Ph4DBA)(DPE)2(OTf)] (7), where Ph4DBA(2-) is the dinucleating bis(carboxylate) ligand dibenzofuran-4,6-bis(diphenylacetate), have been prepared as synthetic models for the dioxygen-binding non-heme diiron protein hemerythrin (Hr). X-ray crystallography reveals that, in the solid state, these compounds contain the asymmetric coordination environment found at the diiron center in the reduced form of the protein, deoxyHr. M?ssbauer spectra of the models (4, delta = 1.21(2), DeltaE(Q) = 2.87(2) mm s(-1); 7, delta(av) = 1.23(1), DeltaE(Qav) = 2.79(1) mm s(-1)) and deoxyHr (delta = 1.19, DeltaE(Q) = 2.81 mm s(-1)) are also in good agreement. Oxygenation of the diiron(II) complexes dissolved in CH2Cl2 containing 3 equiv of N-MeIm (4) or neat EtCN (7) at -78 degrees C affords a red-orange solution with optical bands at 336 nm (7300 M(-1) cm(-1)) and 470 nm (2600 M(-1) cm(-1)) for 4 and at 334 nm (6400 M(-1) cm(-1)) and 484 nm (2350 M(-1) cm(-1)) for 7. These spectra are remarkably similar to that of oxyHr, 330 nm (6800 M(-1) cm(-1)) and 500 nm (2200 M(-1) cm(-1)). The electron paramagnetic resonance (EPR) spectrum of the cryoreduced, mixed-valence dioxygen adduct of 7 displays properties consistent with a (mu-oxo)diiron(II,III) core. An investigation of 7 and its dioxygen-bound adduct by extended X-ray absorption fine structure (EXAFS) spectroscopy indicates that the oxidized species contains a (mu-oxo)diiron(III) core with iron-ligand distances in agreement with those expected for oxide, carboxylate, and amine/hydroperoxide donor atoms. The analogous cobalt complex [Co2(mu-OH)(mu-Ph4DBA)(TMEDA)2(OTf)] (6) was synthesized and structurally characterized, but it was unreactive toward dioxygen.     

Stopped-flow Fourier transform infrared spectroscopy of nitromethane oxidation by the diiron(IV) intermediate of methane monooxygenase

The hydroxylase component (MMOH) of soluble methane monooxygenase from Methylococcus capsulatus (Bath) was reduced to the diiron(II) form and then allowed to react with dioxygen to generate the diiron(IV) intermediate Q in the first phase of a double-mixing stopped-flow experiment. CD3NO2 was then introduced in the second phase of the experiment, which was carried out in D2O at 25 degrees C. The kinetics of the reaction of the substrate with Q were monitored by stopped-flow Fourier transform infrared spectroscopy, observing the disappearance of the asymmetric NO2 bending vibration at 1548 cm-1. The data were fit to a single-exponential function, which yielded a kobs of 0.45 +/- 0.07 s-1. This result is in quantitative agreement with a kobs of 0.39 +/- 0.01 s-1 obtained by observing the disappearance of Q by double-mixing stopped-flow optical spectroscopy at its absorption maximum of 420 nm. These results provide for the first time direct monitoring of the hydroxylation of a methane-derived substrate in the MMOH reaction pathway and demonstrate that Q decay occurs concomitantly with substrate consumption.     

Quantitative analysis of 23-hydroxybetulinic acid in mouse plasma using electrospray liquid chromatography/mass spectrometry

23-Hydroxybetulinic acid is a newly isolated derivative of betulinic acid. The agent exhibits potential anti-tumor activity and functions in this regard via apoptosis. In support of pharmacokinetic and toxicological evaluations, a new assay based on liquid chromatography/mass spectrometry (LC/MS) was developed for the quantitative analysis of 23-hydroxybetulinic acid. Sample preparation consisted of extraction of the plasma by the addition of methylene chloride followed by centrifugation. Aliquots of the supernatant were analyzed using an isocratic reversed-phase high-performance liquid chromatography (HPLC) system coupled to a negative ion electrospray mass spectrometer. Molecules of 23-hydroxybetulinic acid and the internal standard limonin were detected using selected ion monitoring at m/z 471 and 469, respectively. The limit of detection of 23-hydroxybetulinic acid was 0.05 pg (0.11 fmol) injected on-column (10 pg/mL, 5 microL injection volume), and the limit of quantitation was 10 pg (21.19 fmol, 2 ng/mL, 5 muL injection volume). 23-Hydroxybetulinic acid was stable in plasma samples at -20 degrees C for at least 3 weeks. The intra-day and inter-day coefficients of variation of the assay were 3.0 and 4.8%, respectively. The utility of the assay was demonstrated by measuring 23-hydroxybetulinicacid in mouse plasma following intragastric administration (IG) in vivo. Pharmacokinetic parameters were calculated using the 3P97 pharmacokinetic software package. A two-compartment, first-order model was selected for pharmacokinetic modeling. The result showed that after IG of 200 mg/kg 23-hydroxybetulinic acid, the plasma concentrations reached peaks at 2 h with C(max) of 3.1 microg/mL. The 200 mg/kg 23-hydroxybetulinic acid suspension IG doses were found to have long elimination half-lives of 25.6 h and low bioavailability of 2.3%. No interference was noted due to endogenous substances. These analytical methods should be of value in future studies related to the development and characterization of 23-hydroxybetulinic acid.     

Molecular dynamics simulation of the spontaneous formation of a small DPPC vesicle in water in atomistic detail

Molecular dynamics simulations have been used to study the spontaneous aggregation of a concentrated solution of dipalmitoylphosphatidylcholine (DPPC) molecules in water into a small vesicle. The molecules were represented in atomistic detail. Starting from a DPPC solution in water, an oblong vesicle with a long axis of 15 nm and short axes of 10 nm was formed spontaneously. After 90 ns of simulation, the vesicle contained a number of water pores. Water pores were shown to facilitate exchange of lipids between inner and outer leaflets. Lipid tails were shown to be less ordered in the inner leaflet of the vesicle, as compared to those in the outer leaflet of the vesicle and an equilibrated lamellar bilayer.     

Influence of ozonized kraft lignin on the crystallization of CaCO3

Results are reviewed from a study examining how structural modifications introduced by ozonization enhance the influence of kraft lignin on the crystallization of CaCO(3). Ozone treatment of kraft lignin in an aqueous environment is shown to increase its carboxylic acid and overall oxygen content and reduce its molecular weight. Calcium concentration and temperature were monitored in heated supersaturated solutions containing ozonized kraft lignins to gauge their influence on CaCO(3) crystallization processes. The presence of kraft lignin raises the temperature necessary to induce crystallization. This effect is shown to level off at relatively low lignin concentrations and be dependent on the extent of ozone treatment the kraft lignin has undergone. A linear correlation is found between crystallization temperatures and the carboxylic acid content of ozonized lignin samples indicating the introduction of these functional groups plays an important role in enhancing its inhibitory effect. Scanning electron microscopy images of crystals grown in the presence of kraft lignins show significant morphological modifications. These are consistent with specific or pseudo specific interactions between the lignin and crystal faces of calcite to inhibit growth parallel to its c axis. The influence over crystal morphology demonstrated by modified kraft lignin increases with increasing ozonization. Also presented here are crystallization temperature data for a range of kraft lignin ultrafiltration fractions, which indicate that the optimal (nominal) molecular weight of kraft lignin for inhibiting the crystallization of CaCO(3) lies between 5000 and 10000.     

Ammonium cyanate shows N-H...N hydrogen bonding, not N-H...O

The transformation of ammonium cyanate into urea, first studied over 170 years ago by W?hler and Liebig, has an important place in the history of chemistry. To understand the nature of this solid state reaction, knowledge of the crystal structure of ammonium cyanate is a prerequisite. Employing neutron powder diffraction, we demonstrate conclusively that, in the structure of ammonium cyanate, the NH(4)(+) cation forms N-H...N hydrogen bonds to four cyanate N atoms at alternate corners of a distorted cube, rather than our previously proposed alternative arrangement with N-H...O hydrogen bonds to cyanate O atoms at the other four corners.     

Collagen stability: insights from NMR spectroscopic and hybrid density functional computational investigations of the effect of electronegative substituents on prolyl ring conformations

Collagen-like peptides of the type (Pro-Pro-Gly)(10) fold into stable triple helices. An electron-withdrawing substituent at the H(gamma)(3) ring position of the second proline residue stabilizes these triple helices. The aim of this study was to reveal the structural and energetic origins of this effect. The approach was to obtain experimental NMR data on model systems and to use these results to validate computational chemical analyses of these systems. The most striking effects of an electron-withdrawing substituent are on the ring pucker of the substituted proline (Pro(i)) and on the trans/cis ratio of the Xaa(i-1)-Pro(i) peptide bond. NMR experiments demonstrated that N-acetylproline methyl ester (AcProOMe) exists in both the C(gamma)-endo and C(gamma)-exo conformations (with the endo conformation slightly preferred), N-acetyl-4(R)-fluoroproline methyl ester (Ac-4R-FlpOMe) exists almost exclusively in the C(gamma)-exo conformation, and N-acetyl-4(S)-fluoroproline methyl ester (Ac-4S-FlpOMe) exists almost exclusively in the C(gamma)-endo conformation. In dioxane, the K(trans/cis) values for AcProOMe, Ac-4R-FlpOMe, and Ac-4S-FlpOMe are 3.0, 4.0, and 1.2, respectively. Density functional theory (DFT) calculations with the (hybrid) B3LYP method were in good agreement with the experimental data. Computational analysis with the natural bond orbital (NBO) paradigm shows that the pucker preference of the substituted prolyl ring is due to the gauche effect. The backbone torsional angles, phi and psi, were shown to correlate with ring pucker, which in turn correlates with the known phi and psi angles in collagen-like peptides. The difference in K(trans/cis) between AcProOMe and Ac-4R-FlpOMe is due to an n-->pi interaction associated with the Bürg-Dunitz trajectory. The decrease in K(trans/cis) for Ac-4S-FlpOMe can be explained by destabilization of the trans isomer because of unfavorable electronic and steric interactions. Analysis of the results herein along with the structures of collagen-like peptides has led to a theory that links collagen stability to the interplay between the pyrrolidine ring pucker, phi and psi torsional angles, and peptide bond trans/cis ratio of substituted proline residues.     

Determination of deoxynivalenol in cereals and cereal products by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered a applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200-2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values < 1.3.     

Nitrile biotransformations for highly efficient and enantioselective syntheses of electrophilic oxiranecarboxamides

Catalyzed by a nitrile hydratase/amidase-containing microbial Rhodococcus sp. AJ270 whole-cell catalyst, a number of racemic trans-2,3-epoxy-3-arylpropanenitriles 1 underwent rapid and efficient hydrolysis under very mild conditions to afford 2R,3S-2-arylglycidamides 2 in excellent yield with enantiomeric excess higher than 99.5%. The overall enantioselectivity of the biotransformations originated from the combined effects of a dominantly high 2S-enantioselective amidase and low 2S-enantioselective nitrile hydratase involved in the cell. The influence of the substrates on both reaction efficiency and enantioselectivity was also discussed in terms of steric and electronic effects.     

CCR5 antagonists: 3-(pyrrolidin-1-yl)propionic acid analogues with potent anti-HIV activity

[reaction: see text] A novel approach to alpha,alpha-disubstituted-beta-amino acids (beta(2,2)-amino acids) was employed in the synthesis of a series of 3-(pyrrolidin-1-yl)propionic acids possessing high affinity for the CCR5 receptor and potent anti-HIV activity. The rat pharmacokinetics for these new analogues featured higher bioavailabilities and lower rates of clearance as compared to cyclopentane 1.