抛物面式太阳能聚能系统聚光特性模拟

结合集热器的光学特性,本文应用蒙特卡罗法对理想的槽型和碟型两种抛物面集热器在不同焦距、不同边缘角时焦面上的热流密度进行了计算,获得了焦距、边缘角和聚光比之间的关系。在考虑太阳不平行度、跟踪指向误差、镜面的反射误差条件下,对碟型抛物面太阳能聚能系统的辐射特性进行了数值模拟分析,获得了吸收器壁面热流分布以及边缘角对焦面热流分布的影响,为太阳能聚能系统的设计和安装提供参考依据。     

Preparation of stable second‐order nonlinear optical films by sol–gel technique

A stable nonlinear optical (NLO) film containing “T” type alkoxysilane dye was prepared by sol–gel technology. This crosslinked “T” type alkoxysilane dye was synthesized and fully characterized by FTIR, UV–Vis spectra, and ¹H‐NMR. Followed by hydrolysis and copolymerization processes of the alkoxysilane with γ‐glycidoxypropyl trimethoxysilane (KH560) and tetraethoxysilane (TEOS), high quality inorganic–organic hybrid second‐order NLO films were obtained by spin coating. The “T” type structure of the alkoxysilane was found to be effective for improving the temporal stability of the optical nonlinearity due to the reduction in the relaxation of the chromophore in the film materials. Copyright © 2009 John Wiley & Sons, Ltd.     

气相色谱/质谱法测定熏肉中的多环芳烃

建立了熏肉中多环芳烃的气相色谱/质谱(GC/MS)测定方法。样品经正己烷-丙酮(体积比为1∶1)超声波提取、氧化铝柱净化后,用GC/MS分离测定。优化了25种多环芳烃(PAHs)化合物的分离测定条件。结果 25种PAHs回收率范围为48.5%-106.5%;日内(n=7)相对标准偏差为3.75%-7.95%。方法具有灵敏度高、准确度好、能同时分离测定20余种多环芳烃化合物的优点,适合于熏肉中多环芳烃化合物的分析测定。     

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

两台恒速机上的MapReduce排序算法研究

研究源自于MapReduce系统的一类排序问题。给定两台恒速机和一组按列表到达的工件，每个工件包含两类任务：Map Task和Reduce Task。假设Map任务和Reduce任务都是不可中断的，Map任务可以并行处理，即可以任意分割成若干小的任务并在两台机器上同时处理，而Reduce任务只可以在单台机器上处理。一旦工件到达，必须为其指派机器和开工时间，目标是使得最后完工时间最小。对LSc算法的竞争比进行了分析，得到其一般情形下的竞争比当$s\geq（1+\sqrt{5}）/2$时为$1+1/s$，否则为$1+s/（s+1）$。而当每个工件$J_j$都满足其Map任务总长大于等于Reduce任务总长时，其竞争比当$s\geq（1+\sqrt{3}）/2$时不超过$1+1/（2s）$，否则为不超过$1+s/（2s+1）$。     

基于相干散射模型箔条云团散射截面研究

采用箔条云团的相干散射模型^[l]研究了自由空间中云团散射截面与其空间分布的依赖关系,定量地给出了几种典型空间分布箔条云团的极化散射截面与其空间分布参数的关系曲线或曲面,计算机仿真结果表明：箔条云团散射截面因其空间分布形式的不同而有较大的差异,某些情况下,不同空间分布的散射截面之间的差异可达8～12dB之多,通过设计箔条云团的空间分布形状及其密度分布,可有效地增大箔条云团的有效散射截面,进而提高于扰效果。     

开放式基金流动性指标研究

本文主要介绍了开放式投资基金的流动性概念和指标体系设计，并运用指标进行实证检验，分析基金的流动性及其实际意义。     

铜合金中金相组织特征参数的测量

：根据体视学和定量金相分析的基本原理，利用Image—Pro Plus(IPP)图像分析软件测定了铜合金金相组织的相体积分数、晶粒度大小、粒子间距等特征参数，并提出了一种测量粒子间距的近似算法。     

Amperometric sensor for ascorbic acid based on a glassy carbon electrode modified with gold-silver bimetallic nanotubes in a chitosan matrix

We report on an amperometric sensor for ascorbic acid (AA) that is based on highly dense gold-silver nanotubes in a chitosan film on a glassy carbon electrode. The nanotubes were synthesized by a poly(vinyl pyrrolidone)-mediated polyol method employing a replacement reaction with silver nanowires as templates, and were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Under the optimal conditions, the sensor exhibits good electrocatalytic activity towards the oxidation of AA, and this enables the determination of AA in the 5 μM to 2 mM concentration range, with a detection limit at 2 μM (at an S/N of 3). The response time is 2 s. The sensor displays good reproducibility, selectivity, sensitivity, and long-term stability.

A Dynamic Supplier Selection and Inventory Management Model for a Serial Supply Chain with a Novel Supplier Price Break Scheme and Flexible Time Periods

A new supplier price break and discount scheme taking into account order frequency and lead time is introduced and incorporated into an integrated inventory planning model for a serial supply chain that minimizes the overall incurred cost including procurement, inventory holding, production, and transportation. A mixed-integer linear programming (MILP) formulation is presented addressing this multi-period, multi-supplier, and multi-stage problem with predetermined time-varying demand for the case of a single product. Then, the length of the time period is considered as a variable. A new MILP formulation is derived when each period of the model is split into multiple sub-periods, and under certain conditions, it is proved that the optimal solution and objective value of the original model form a feasible solution and an upper bound for the derived model. In a numerical example, three scenarios of the derived model are solved where the number of sub-period is set to 2, 3, and 4. The results further show the decrease of the optimal objective value as the length of the time period is shortened. Sufficient evidence demonstrates that the length of the time period has a significant influence on supplier selection, lot sizing allocation, and inventory planning decisions. This poses the necessity of the selection of appropriate length of a time period, considering the trade-off between model complexity and cost savings.