Modeling of striplines between a power and a ground plane

In this paper, a stripline model is presented for coupled signal lines routed between a power and a ground plane based on multiconductor transmission line (MTL) theory. Through a suitable diagonalization of the MTL equations for striplines, the transverse electromagnetic (TEM) parallel-plate mode is decoupled from the stripline mode. In this way, stripline models that are obtained assuming ideal planes at ground potential can be extended to take into account the nonideal behavior of the planes. The presented model is applied to represent mode conversion due to vias, holes in the reference planes, and terminations of the stripline. Influence of inhomogeneous media is discussed.     

Subnanometer Analysis and Modeling of MBE Grown InP Based MODFETs

InGaAs/InAlAs double-doped double-strained modulation-doped field-effect transistors OD-SMODFETs)1 were grown by solid source molecular beam epitaxy. The structures were characterized using high resolution x-ray diffraction, Hall effect, and cross-sectional scanning tunneling microscopy. A record two-dimensional electron gas (2DEG) sheet density of 8.5 × 10¹²/cm² and 8.1 × 10¹²/cm² for 300 and 77K, respectively, was achieved. The mobility was 6500 and 12000 cm²/ Vs for 300 and 77K, respectively. To the author’s knowledge,² the previous record 2DEG result was 6.58 × 10¹²/cm². The electron mobility was limited by alloy scattering and interface roughness caused by the presence of “clustering.” Using cross-sectional scanning tunneling microscopy to verify the presence of these clusters, we have the first images of the lattice matched InAlAs (spacer)-InGaAs (quantum well) interface. These images reveal clusters that have approximate spherical or cylindrical shapes with equivalent cubic dimensions ranging from 25 to 45Å.     

Cyclic code weight spectra and BIST aliasing

In built-in self-test for logic circuits, test data reduction can be achieved using a linear feedback shift register. The probability that this data reduction will allow a faulty circuit to be declared good is the probability of aliasing. Based on the independent bit-error model, we show that the code spectra for the cyclic code generated by the feedback polynomial can be used to obtain an exact expression for the aliasing probability of a multiple input signature register when the test length is a multiple of the cycle length. Several cases are examined and, as expected, primitive feedback polynomials provide the best performance. Some suggestions to avoid peaks in the aliasing probability are given.     

Green's functions associated with the edth operators

An integral representation for the inverses of the differential operators called edth is given in the two cases of particular interest. This operator plays a large role in the study ofH spaces and of self-dual solutions to the Yang-Mills field equations in the asymptotic domain.     

光控制平面在下一代光网络中的作用

光网络的发展,特别是像DWDM这样的技术进步,为业务提供商提供了近乎无限的带宽和更高的光纤利用率,使得他们能够更经济地部署收益更大的新业务。目前的挑战在于如何提供智能控制平面来使业务提供商能够创建并快速而灵活地配置新的宽带业务。一种很有前途的解决方案是将数据平面强大的硬件能力与智能控制平面集成在一起,为此可将IP路由技术与多协议标签交换技术（MPLS或叫多协议波长交换）在光层上结合在一起。在研究这种光控制平面解决方案之前,特别是研究控制平面技术应用于典型的IP网络和新的光网络的发展过程之前不妨先回顾一…     

RF Testing on a Mixed Signal Tester

In this paper, testing of radio frequency (RF) devices with mixed-signal testers is discussed. General purpose automatic test equipment (ATE) will be used. In this paper, a more universal test structure utilizing RF building blocks is proposed. A global positioning system (GPS) device is used as an example to illustrate how to develop the RF test plan with this usage. The test plan developed includes fast, cost-effective and dedicated circuitry.

Calculation of the rotation-vibration spectrum of NH+

Ab initio molecular orbital calculations have been used to compute potential energy and dipole moment functions for the X²II and a⁴Σ^? states of NH⁺. These functions have been used to compute rotational-vibrational energy levels, including the interaction between the two states. Transition moments have been calculated for transitions between these levels, using either the results of numerical diagonalization of the Hamiltonian, or more approximately by fitting analytic functions. Good agreement with experimental data is found, and our results have also been used to interpret previously unassigned spectral lines.     

Reexamination of the I2 spectrum near the B(3Π0u+) state dissociation limit

The disagreement of Danyluk and King's (Chem. Phys.25, 343 (1977)) rotational constants for levels lying near the dissociation limit of B-state I₂ with the mechanical behavior predicted by near-dissociation theory is investigated. The discrepancies are shown to be much too large to be explained by either the neglect of centrifugal distortion effects in the original analysis or by rotational or spin-rotation coupling to a nearby repulsive 1_u state. These differences are therefore attributed to experimental error, a conclusion which is confirmed by more recent experimental results. A reanalysis of the best available data for levels near the dissociation limit of B-state I₂ then yields improved values for the B-state dissociation limit $\text{D}$ = 20 043.16 (±0.02) cm^?1 of the vibrational index at dissociation v_$\text{D}$ = 87.32 (±0.04) and of the long-range potential constant $\text{C}{}_5\text{= 2.88 (±0.03) × 10}{}^5\text{cm}{}^{\mathrm{?1}}\text{A}\text{?}{}^5$. This in turn implies a slightly improved ground-state dissociation energy of $\text{D}$₀ = 12 440.18 (±0.02) cm^?1.     

Logic Design Validation via Simulation and Automatic Test Pattern Generation

We investigate an automated design validation scheme for gate-level combinational and sequential circuits that borrows methods from simulation and test generation for physical faults, and verifies a circuit with respect to a modeled set of design errors. The error models used in prior research are examined and reduced to five types: gate substitution errors (GSEs), gate count errors (GCEs), input count errors (ICEs), wrong input errors (WIEs), and latch count errors (LCEs). Conditions are derived for a gate to be testable for GSEs, which lead to small, complete test sets for GSEs; near-minimal test sets are also derived for GCEs. We analyze undetectability in design errors and relate it to single stuck-line (SSL) redundancy. We show how to map all the foregoing error types into SSL faults, and describe an extensive set of experiments to evaluate the proposed method. These experiments demonstrate that high coverage of the modeled errors can be achieved with small test sets obtained with standard test generation and simulation tools for physical faults.     

The Asymmetric Golden Code for Fast Decoding on Time-Varying Channels

The golden code is a full-rate full-diversity space–time code for the two-input two-output channel with good performance but high decoding complexity. The overlaid Alamouti codes were recently proposed as an alternative; in exchange for a slight performance penalty, they have lower decoding complexity on quasistatic channels with QAM alphabets. However, the complexity advantage of the overlaid codes vanishes for time-varying channels. This paper proposes the asymmetric golden code, a novel full-rate and full-diversity space–time code for the two-input two-output channel that offers reduced-complexity decoding on both quasistatic and time-varying channels.