Comparison of short range interactions in nematic liquid crystals A 2H-NMR study of 5CB-d19 as a solute

Previous studies using dideuterium as a solute have demonstrated the importance for orientation of the interaction between the solute molecular quadrupole moment and the average electric field gradient present in liquid crystals. With the aim of learning about additional orientational mechanisms, we have studied the temperature dependence of the ²H-NMR spectra of the liquid crystal 5CB-d₁₉ as the solute in three liquid crystal mixtures: 55 wt % 1132/EBBA, 56·5 wt % 1132/EBBA and 70 wt % 5CB/EBBA. In these mixtures, the contribution from the environment to the average electric field gradient at the ²H nucleus of dideuterium is zero. The spectra of 5CB-d₁₉ in the mixtures 55 wt % 1132/EBBA and 56·5 wt % 1132/EBBA are equivalent, but are different from those in 70 wt % 5CB/EBBA. The spectra of 5CB in 55 wt % 1132/EBBA and 70 wt % 5CB/EBBA are analysed using two different models for the short range potential, and param eters of the models are used to compare the potentials in the different mixtures. For a given spectral splitting of the chain C₁ deuteron, the reduced short range potential is the same in all three mixtures studied. The spectral differences observed are a consequence of different nematic-isotropic phase transition temperatures combined with the effect of trans/gauche-isomerization in the hydrocarbon chain.     

Manifestation of biquadratic coupling in the smectic C* phase soft mode dielectric response

The soft mode dielectric response of three ferroelectric chiral smectic C* substances is studied in the vicinity of the smectic C*-smectic A* phase transition. For some substances the soft mode dielectric strength exhibits a pronounced anomaly in the C* phase just below the phase transition. We show how this anomaly can be systematically correlated with a corresponding anomaly in the experimentally determined ratio of spontaneous polarization over tilt. By comparing the experimental results with the theoretical predictions of an extended Landau model, we demonstrate how the crossover behaviour of the system can be interpreted as being the consequence of the presence of a biquadratic coupling between tilt and polarization in the Landau free-energy of the system.     

Pretransitional electro-optic response of 6CB liquid crystal in the isotropic phase

In this work, the electro-optic response of a 6CB liquid crystal layer is studied using a sensitive differential technique. The layer is held at a temperature just above the nematic to isotropic phase transition. Transverse magnetic (p) polarized light incident on the cell is coupled to guided modes in the liquid crystal layer using prism coupling. The modes manifest themselves as sharp dips in the reflectivity as the angle of incidence is scanned. When a low frequency sinusoidal voltage is applied to the cell, the resonant mode shapes and excitation angles are altered at a frequency which is twice that of the applied field, resulting in a modulation of the reflectivity for a given angle of incidence. By synchronous observation of the modulated signal, a differential signal is recorded. Comparing the data with modelling generated from multilayer optics theory, two effects are then quantified. The first of these is an induced birefringence, varying quadratically with applied voltage, which is well understood and can be expressed in terms of Landau-de Gennes theory. The second is a field induced perturbation in the imaginary part of the optical permittivity, δε_i, which implies a modification of the light scattering properties of the liquid crystal. The measurement of the latter effect is, as far as we know, a novel one, being only made possible by the remarkable sensitivity of the synchronous differential technique.     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.     

On joint transmitter and receiver optimization formultiple-input-multiple-output (MIMO) transmission systems

The problem of joint transmitter and receiver optimization for MIMO systems under the mean-squared error (MSE) criterion is revisited. We address the general problem of N (number of users) ≠M (number of channel inputs) ≠P (number of channel outputs) when the system is Nyquist bandlimited and obtain analytical solutions for the optimal transmit-receive pair. Next, we demonstrate how the above result is directly applicable to the problem where the system has excess bandwidth, thereby generalizing the results of Salz (1985). In conclusion, several numerical examples are included to demonstrate the performance gains obtainable with jointly optimized MIMO systems vis-a-vis systems based only on receiver optimization     

The Los Alamos beacon receiver array

Describes radio receivers that monitor transmissions from beacons on geosynchronous satellites. The receivers can detect ionospheric perturbations of a 300-3000 s period in the electron density integrated from beacon to receiver, for amplitudes as low as (1-2)×10¹³ m^-2. Data are used in studies of atmospheric acoustic and acoustic-gravity waves     

Neural network approach to land cover mapping

A pattern classification method is proposed for remote sensing data using neural networks. First, the authors apply the error backpropagation (BP) algorithm to classify the remote sensing data. In this case, the classification performance depends on a training data set. In order to get stable and precise classification results, the training data set is selected based on geographical information and Kohonen's self-organizing feature map. Using the training data set and the error backpropagation algorithm, a layered neural network is trained such that the training patterns are classified with a specified accuracy. After training the neural network, some pixels are deleted from the original training data set if they are incorrectly classified and a new training data set is built up. Once training is complete, a testing data set is classified by using the trained neural network. The classification results of LANDSAT TM data show that this approach produces excellent results which are more realistic and noiseless compared with a conventional Bayesian method     

Path tracking control of a manipulator considering torquesaturation

When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned taking into consideration the manipulator's dynamics and actuator's torque limits, at least one of the joints should be at the torque limit. The execution of such a trajectory by a conventional feedback control scheme results in torque saturation. Consequently, the tracking error cannot be suppressed and the manipulator may deviate from the desired path. In this paper, the author's propose a feedback control method for path tracking which takes the torque saturation into account. Based on the desired path, a coordinate system called path coordinates is defined. The path coordinates are composed of the component along the path and the components normal to the path. The equation of motion is described in terms of the path coordinates. Control of the components normal to the path is given priority in order to keep the motion of the manipulator on the path. Simulations of a two-degree-of-freedom manipulator show the effectiveness of this method     

A boost-type converter for DC-supply of fluorescent lamps

A boost type converter is described that is suitable for low-voltage DC-supply of fluorescent lamps. It has inherent lamp current limitation (ballast action) and provides the high voltage pulses and electrode heating that are required for igniting the lamp. The proposed circuit is applicable in automotive, emergency, and portable light sources.<>     

Optoelectronic integration of a GaAs/AlGaAs bistable field effecttransistor (BISFET) and LED

The bistable field effect transistor (BISFET) is a novel inversion-channel switching device exhibiting abrupt current transitions and hysteresis in its output characteristics. The semiconductor structure of the BISFET is compatible with a range of electronic and optoelectronic devices. In this work, integration of a BISFET with an LED is reported. Both devices have been implemented on a single semiconductor substrate using a single fabrication sequence. The BISFET is used to current drive the LED. Abrupt transitions and hysteresis are seen in the optical output from the circuit in the range of gate voltage from 1.75 V to 1.9 V