A low-resistance self-aligned T-shaped gate for high-performancesub-0.1-μm CMOS

This paper describes the high performance of T-shaped-gate CMOS devices with effective channel lengths in the sub-0.1-μm region. These devices were fabricated by using selective W growth, which allows low-resistance gates smaller than 0.1 μm to be made without requiring fine lithography alignment. We used counter-doping to scale down the threshold voltage while still maintaining acceptable short-channel effects. This approach allowed us to make ring oscillators with a gate-delay time as short as 21 ps at 2 V with a gate length of 0.15 μm. Furthermore, we experimentally show that the high circuit speed of a sub-0.1-μm gate length CMOS device is mainly due to the PMOS device performance, especially in terms of its drivability     

Influence of the quality of the heterointerface on the cyclotron resonance spectra of InAs/(AlGa)Sb heterostructures

Cyclotron resonance is measured in solitary type-II InAs-AlGaSb quantum wells grown by molecular-beam epitaxy under various growth conditions. Quantum oscillations observed in the cyclotron resonance spectra in InAs-GaSb samples are attributed to scattering by a short-range potential due to roughness of the heterointerface. A new method based on measurement of the cyclotron resonance spectra is proposed for assessing the quality of the heterointerface. Fiz. Tekh. Poluprovodn. 31, 1246–1248 (October 1997)     

Four-channel polarization-insensitive optically transparent wavelength converter

Multichannel wavelength converters may be important components in the cross-connects in future wavelength-division multiplexed (WDM) transport networks. We demonstrate a multichannel, polarization-insensitive, optically transparent wavelength converter, based on four-wave mixing in two semiconductor optical amplifiers in a polarization-diversity arrangement. Bit-error-rate (BER) measurements with four input 2.5-Gb/s WDM channels, spaced by 2 nm, show penalties for wavelength conversion less than 2.6 dB at 10/sup -9/ BER. Changes in the state of polarization of the input signals cause the output power to change by less than 1.2 dB, and the corresponding power penalties change by less than 0.9 dB.     

`Minting' electronic cash

Electronic equivalents of traditional cash payment systems are being launched worldwide. Electronic cash can combine the benefits of traditional cash with those of payment by debit and credit card, while circumventing both their shortcomings. As with traditional cash, electronic cash should have high acceptability and be suitable for low value payment from person to person. With the possible exception of online payment platforms such as the Internet, it is preferred that payments be verifiable offline, without the bank's involvement, for reasons of cost effectiveness and speed. To facilitate electronic cash payments over the phone and the Internet, physical proximity of payer and payee should not be necessary. Moreover, electronic cash should offer privacy of payments. In particular, payments by an honest payer should be untraceable, and information about transaction content should remain privy to payer and payee. Yet a payer ought to always be able to trace the payee; traceability suits electronic cash and is as open to extortion, money laundering, and bribery as a check or wire transfer. Lastly, as with payments by debit and credit card, electronic cash should be convenient to store and transport, while protecting users against loss, theft, and accidental destruction     

Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Synthesis, structure, and antimetastatic activity of thetrans-[Pt(NC5H4C(O)NHC2H4ONO2)2Cl2] complex

Thetrans-[Pt(NC₅H₄C(O)NHC₂H₄ONO₂)₂Cl₂] complex (2) was prepared by the reaction of nicorandyl (N-nitroethoxynicotinamide), which is widely used in cardiology, with K₂PtCl₄ in water. The structure of2 was established by X-ray structural analysis. It was found that complex2 exhibits high antitumor activity, in particular, antimetastatic activity, unlike the analogous Cu^II complex with bromine atoms. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1672–1675, September, 1997.     

Electronic transport in a type-II GaInAsSb/p-InAs heterojunction with different doping levels of the solid solution

Galvanomagnetic phenomena and photoconductivity in broken-gap type-II GaInAsSb/p-InAs heterojunctions with different levels of doping of the solid solution with donor (Te) or acceptor (Zn) impurities have been investigated. It has been determined that in such structures an electronic channel, which determines the galvanomagnetic effects in a wide range of doping levels, is present at the heterojunction. A sharp decrease of the Hall mobility was observed in the experimental heterostructures with a high level of doping of the epitaxial layer with an acceptor impurity. The observed effect is due to exhaustion of the electronic channel as a result of carrier localization in potential wells at the heterojunction. Fiz. Tekh. Poluprovodn. 31, 897–901 (August 1997)     

Color image retrieval based on hidden Markov models

In this correspondence, a new approach to retrieving images from a color image database is proposed. Each image in the database is represented by a two-dimensional pseudo-hidden Markov model (2-D PHMM), which characterizes the chromatic and spatial information about the image. In addition, a flexible pictorial querying method is used, by which users can paint the rough content of the desired images in a query picture. Image matching is achieved by comparing the query picture with each 2-D PHMM in the database. Experimental results show that the proposed approach is indeed effective.     

Investigation of the chemical state of copper in Cu/SiO2 composite films by x-ray photoelectron spectroscopy

The concentration and chemical state of copper in the subsurface region of Cu/SiO₂ composite films obtained by simultaneous magnetron sputtering from two sources (Cu and SiO₂) are determined by x-ray photoelectron spectroscopy (XPS). It is established that copper in the as-grown film is primarily in the form of unoxidized atoms dispersed in a SiO₂ matrix. Annealing of the film results in practically no oxidation, but about 70% of the copper atoms condense into metallic clusters with sizes below 10 Å in the subsurface region and about 50 Å in the bulk of the film. The changes in the binding energy of core electrons, and especially in the energies of Auger electrons, are so large in this situation that photoelectron and Auger spectroscopy are efficient methods for monitoring the chemical state of this composite material.     

State of and prospects for XeF(C−A) optically pumped lasers

Experimental and theoretical results are presented on an XeF(C?A) blue-green laser driven by 5-kJ energy. The laser was pumped by a ferrite-induced discharge of 90 cm in length. The output energy of 0.22 J was obtained with a plane-parallel resonator. A program to simulate laser operation has been developed. Numerical results for a wide range of conditions are compared with experiments performed by us and by other authors. It is found that intracavity refractive losses limit laser operation for XeF pressures above 3 torr. The laser efficiency strongly depends on the discharge-to-cavity length ratio. Possible ways to increase the laser power and efficiency are discussed.